Application of capillary electrophoresis with different sample stacking strategies for the determination of a group of nonsteroidal anti-inflammatory drugs in the low microg x L(-1) concentration range

Several on-column sample preconcentration modes--large-volume sample stacking using the EOF pump (LVSEP), LVSEP with anion-selective exhaustive injection (LVSEP-ASEI) and field-amplified sample injection with sample matrix removal using the electroosmotic flow (EOF) pump (FAEP)--were used to analyze some nonsteroidal anti-inflammatory drugs (NSAIDs) by capillary electrophoresis, and then compared. Methanol was the background electrolyte solvent to suppress the EOF. The effect of the type and length of the solvent plug, and the sample injection time were investigated in FAEP to determine the conditions that provided the best response. LVSEP, LVSEP-ASEI, and FAEP improved the sensitivity of the peak area by 100-, 1200-, and 1800-fold, respectively. The methodology developed, in combination with solid-phase extraction (SPE), was applied to the analysis of water samples.     

The microenvironment in polymer solids with added plasticizers. An attempt to measure the size and distribution of free volume in poly(methyl methacrylate) solids

Various amounts of n-alkylbenzenes (C_n: C₆H₅-C_nH_2n+1 (n = 3-16)) were doped into poly(methyl methacrylate) (PMMA) films, and the emission and thermal properties of each film were measured in detail together with their solid-state ¹³C NMR spectra. The aim of the present work was to estimate the size distribution of free volume in amorphous regions of polymer solids heavily doped with plasticizers by using C_n as models of a plasticizer. The excimer fluorescence yields of C_n in PMMA were found to depend on both the amount of C_n and the length of the alkyl chains of C_n, although the fluorescence spectra of all of the C_ns in dilute fluid solution were almost the same. The quantitative analysis showed: (1) C_n with n ? 12 induces a phase separation in PMMA, in which almost all of the C_n molecules are in a separated phase, and thus they cannot penetrate regions in which PMMA chains are aggregated. This means that C_n with n ? 12 cannot enlarge the space between PMMA chains. (2) Smaller C_n (n < 11) can enter free volumes between PMMA chains that correspond to their molecular size, but they can enlarge them only to a limited extent. Thus, the amount by which plasticization can increase the free volume of PMMA is limited by the size of the dopant and the inherent free volume of the polymer matrix. (3) The efficiency of excimer formation was found to reveal the maximum amount of C_n that could fit in the free volume of PMMA. Thus our fluorescence measurements showed that PMMA solids that were plasticized to their limit had a free volume that was larger than the volume occupied by all the conformers of C₅ and smaller than the volume occupied by almost all the conformers of C₁₂. In conclusion, we were able to obtain information on plasticization and to demonstrate a method of monitoring microenvironments in polymer solids after they have been doped with plasticizers.     

Determination of estrogenic steroids in surface water and wastewater by liquid chromatography-electrospray tandem mass spectrometry

An analytical method is presented which permits trace level determination of 17alpha-ethynylestradiol (EE2), 17beta-estradiol (E2), and estrone (E1). Using this method, the estrogenic steroids were analyzed in drinking water, surface water, and wastewater (sewage influents and effluents) at concentrations down to 0.1 ng/L. Sample volumes between 100 and 500 mL are concentrated using automated solid-phase extraction. Analysis is performed by liquid chromatography with detection by tandem mass spectrometry. Applying simple clean-up procedures and internal standard calibration, recovery losses resulting from matrix-dependent ion suppression during electrospray ionization could be compensated for all of the investigated compounds. Recoveries around 100% were obtained for all analytes after correction using the internal standards. Limits of quantification (LOQ) were between 0.1 and 0.4 ng/L for purified sewage, surface, ground, and drinking water and between 1 and 2 ng/L in the case of raw sewage. Water treatment by wastewater treatment plants (WWTPs) or by a surface water treatment plant affected the removal of all estrogenic steroids. Thus, E1, E2, and EE2 were removed in the municipal WWTPs to the extent of 93%, 93%, and 80%, respectively. In the effluents of the WWTP in Ruhleben (Berlin, Germany), E1, E2, and EE2 were detected at the low ng/L level. E2 and EE2 were, however, not present in the Berlin surface water above the LOQ (0.2 ng/L). E1 was the only compound that could be detected in surface water samples. After additional surface water treatment it was still detectable but only at trace-level concentrations with a mean value of 0.16 ng/L.     

葡萄糖、果糖和蔗糖在甲酰胺溶液中的体积性质

报导了含葡萄糖、果糖和蔗糖的甲酰胺溶液的密度数据，无限稀释表观摩尔体积和体积第二维里系数．利用改进的定标粒子理论、基团几何模型和基团加合方法，求解了溶质的空腔生成体积，溶质-溶剂间的氢键作用对体积性质的影响，并和水溶液中的情况进行了比较．     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

Molar heat capacities and volumes of transfer of cytosine,thymine, caffeine and 1,3-diethylthymine to aqueous solutions of glycyl-glycine and L-α-alanyl-L-α-alanine at 25°C

Densities and specific heat capacities of ternary aqueous systems containing dipeptides (glycyl-glycine or L--alanyl-L--alanine) and nucleic acid bases (cytosine or thymine) or their alkyl derivatives (1,3-diethylthymine or caffeine) were determined at 25°C by flow calorimetry and flow densimetry. The partial molar volumes and heat capacities of transfer at infinite dilution of the different nucleic acid bases from water to water+dipeptide solutions were obtained therefrom. Except for the case of the transfer of cytosine to aqueous glycyl-glycine solutions where a small positive dependence of the transfer quantities was observed with the dipeptide concentration, the values of the heat capacities of transfer were in general low, positive or negative, depending on the compensation of hydrophobic-hydrophilic interactions between the dipeptide and the base. The volumes of transfer of most of the bases are very small, within the limit of the experimental error.     

The BKK root count in

The root count developed by Bernshtein, Kushnirenko and Khovanskii only counts the number of isolated zeros of a polynomial system in the algebraic torus . In this paper, we modify this bound slightly so that it counts the number of isolated zeros in . Our bound is, apparently, significantly sharper than the recent root counts found by Rojas and in many cases easier to compute. As a consequence of our result, the Huber-Sturmfels homotopy for finding all the isolated zeros of a polynomial system in can be slightly modified to obtain all the isolated zeros in .

     

Correlations between Van der Waals' volume and retention index general equation applicable to different homologous series

Summary Correlations between retention index (R_I) and Van der Waals' volume (V_W) in homologous series of n-alcohols, n-aldehydes and esters are studied on the stationary phases Carbowax 1540 and squalane. Influence of functional groups is quantified and a method for obtaining one general equation, valid for an indeterminate number of homologous series, is proposed.     

Volumetric studies and thermodynamics of viscous flow of hydroxamic acids in acetone + water solvent at temperatures 303.15 and 313.15 K

Densities ρ and viscosities η of two hydroxamic acids, N-phenyl-2-chlorobenzo- and N-o-tolyl-4-chlorobenzo-, have been determined as a function of their concentration in aqueous acetone solution at temperatures 303.15 and 313.15 K. Apparent molar volumes, standard-state partial molar volumes and relative viscosities have been calculated. The viscosity data have been analyzed using Jones-Dole equation. The activation thermodynamic parameters of viscous flow have been evaluated using Feakins equation. These were obtained to throw light on the mechanism of viscous flow. Thermodynamic interactions in solutions have been studied in terms of a number of excess functions calculated from the experimental data. The effect of hydroxamic acid concentration and temperature on these parameters has been discussed. The results were interpreted in the light of solute-solvent interactions in aquo-organic media.