Electron transport of a quantum wire with spatially periodic spin–orbit coupling

Electron transport properties of an ideal one-dimensional (1D) quantum wire are studied including spatially periodic Rashba spin–orbit coupling (SOC) and Dresselhaus SOC. By comparing with the previous work [S.J. Gong, Z.Q. Yang, J. Phys. Condens. Matter 19 (2007) 446209], two transmission gaps appear in the transmission probability of electrons and their widths are also broadened dramatically. Moreover, it is found that their widths are sensitive not only to the strength of SOCs but also to the length ratio of SOCs segment and non-SOCs segment. In addition, a ‘circle-type’ transmission behavior has been found by tuning the strength of SOCs continuously. Our results may extend the previous work and provide an more effective method to manipulate the current in nanoelectric devices.     

Semiclassical matrix model for quantum chaotic transport with time-reversal symmetry

We show that the semiclassical approach to chaotic quantum transport in the presence of time-reversal symmetry can be described by a matrix model. In other words, we construct a matrix integral whose perturbative expansion satisfies the semiclassical diagrammatic rules for the calculation of transport statistics. One of the virtues of this approach is that it leads very naturally to the semiclassical derivation of universal predictions from random matrix theory.     

Carrier‐Mediated Transport of Hg(II) through Bulk and Supported Liquid Membranes

The transport of Hg (II) ions from an aqueous solution into an aqueous receiving solution through bulk and supported liquid membranes containing a calix[4]arene derivative 1 as a carrier was examined. The kinetic parameters of bulk liquid membrane studies were analyzed assuming two consecutive, irreversible first‐order reactions. The influence of temperature, stirring rate, carrier concentration and solvent on the kinetic parameters (k₁, k₂, R_m ^max, t_max, J_d ^max, J_a ^max) has also been investigated. The membrane entrance rate, k₁, and the membrane exit rate, k₂, increased with increasing temperature and stirring rate. The activation energy values are calculated as 4.87 and 48.63 kj mol^?1 for extraction and reextraction, respectively. The values of calculated activation energy indicate that the process is diffusionally controlled by species. Also, the transport behavior of Hg²⁺ from aqueous solution through a flat‐sheet supported liquid membrane has been investigated by the use of calix[4]arene derivative 1 as carrier and Celgard 2500 as the solid support. A Danesi mass transfer model was used to calculate the permeability coefficients for each parameter studied. The highest values of permeability were obtained with 2‐nitrophenyloctyl‐ether (NPOE) solvent and the influence was found to be in the order of NPOE>chloroform>xylene.     

Synthesis of calix[4]arene-based dipodal receptors: Competitive solvent extraction and liquid bulk membrane transport for selective recovery of Cu2+

A series of new p-tert-butylcalix[4]arene-based dipodal receptors are synthesised in high yields. The calix[4]arene units of all the receptors have been found to be present in cone conformation. To optimise the good extraction ability and high transport rate, we synthesised the receptors that differ from each other in their end groups. These receptors extract Cu²⁺  ion selectively from the buffered aqueous medium containing a mixture of metal ions. The receptor bearing four sp³ nitrogens has by far the greater ability to extract Cu²⁺  than the other receptors. All these receptors were effectively used for Cu²⁺  ion transport from the aqueous buffered source phase to the aqueous receiving phase.

     

A Bipodal Dicyano Anchor Unit for Single‐Molecule Spintronic Devices

The conductance through single 7,7,8,8‐tetracyanoquinodimethane (TCNQ) connected to gold electrodes is studied with the nonequilibrium Green’s function method combined with density functional theory. The aim of the study is to derive the effect of a dicyano anchor group, ?C(CN)₂, on energy level alignment between the electrode Fermi level and a molecular energy level. The strong electron‐withdrawing nature of the dicyano anchor group lowers the LUMO level of TCNQ, resulting in an extremely small energy barrier for electron injection. At zero bias, electron transfer from electrodes easily occurs and, as a consequence, the anion radical state of TCNQ with a magnetic moment is formed. The unpaired electron in the TCNQ anion radical causes an exchange splitting between the spin‐α and spin‐β transmission spectra, allowing the single TCNQ junction to act as a spin‐filtering device.     

空气稳定的氮杂蔻电子传输材料分子设计及三氮杂蔻衍生物迁移率计算

采用密度泛函理论研究氮功能化对蒄类化合物几何构型、电子结构及载流子传输性质的影响. 结果表明, 引入杂N原子可以线性降低前线轨道能级, 增强电子注入能力与空气稳定性, 且邻位掺杂较迫位和均匀掺杂调节效果更为显著. 其中, 十二氮杂蒄（12ac）具有新颖的“碗状”构型和高的电子亲和势（3.45 eV）, 是潜在的空气稳定电子传输材料构筑单元. 理论预测室温下2,6,10-三对甲氧基苯基-3,4,7,8,11,12-六甲氧基三氮杂蒄（3b）晶体的电子迁移率为0.242 cm2/V s, 预计是良好的电子传输材料, 值得进一步器件化研究.     

Analysis of Nonionic Surfactants by High Performance Liquid Chromatography

Abstract

This review discusses the principles of immobilized metal ion affinity chromatography (IMAC) and its applications to protein separations. IMAC functions by binding the accessible electron-donating pendant groups of a protein - such as histidine, cysteine, and tryptophan - to a metal ion which is held by a chelating group covalently attached on a stationary support. A common chelating group is iminodiacetate. The ions commonly used are of borderline or soft metals, such as Cu²⁺, Ni²⁺, Co²⁺, and Zn²⁺. Protein retention in IMAC depends on the number and type of pendant groups which can interact with the metal. The interaction is affected by a variety of independent variables such as pH, temperature, solvent type, salt type, salt concentration, nature of immobilized metal and chelate, ligand density, and protein size. Proteins are usually eluted by a decreasing pH gradient or by an increasing gradient of a competitive agent, such as imidazole, in a buffer. There are still several unresolved issues in IMAC. The exact structures of protein-immobilized metal complexes need to be known so that retention behavior of proteins can be fully understood and sorbent structures can be optimized. Engineering parameters, such as adsorption/desorption rate constants, sorbent capacities, and intraparticle diffusivities, need to be developed for most protein systems. Engineering analysis and quantitative understanding are also needed so that IMAC can be used efficiently for large scale protein separations.     

Computational studies on the injection,transport, absorption,and phosphoresce properties of a series of cationic iridium (III) complexes [Ir(C∧N)2(L)2]+ (C∧N = ppy,tpy, dfppy,bzq)

Quantum chemistry methods are applied to investigate the electronic structures, injection and transport properties, absorption and phosphorescence mechanism of a series of Iridium (III) complexes [Ir(C∧N)₂(L)₂]⁺ (L = 4‐pyCO₂Et; C∧N = 2‐phenylpyridine, 1 ; 2‐(4‐tolyl)pyridine, 2 ; 2‐(4,6‐difluorophenyl)pyridimato, 3 ; benzoquinoline, 4 ), which may be used as emitters on organic light emitting diodes (OLEDs). Calculations of ionization potentials and electron affinities are used to evaluate the injection abilities of holes and electrons into these complexes. The reorganization energy (λ) calculations show that the four complexes are suitable as emitters in OLEDs. The absorptions and emissions can be tuned by adding substituent to the ppy ligand or extending the π‐conjugation effect of the C∧N ligand, and quantum yields of 1 – 4 are investigated. In addition, no solvent effect is observed in the absorption and emission spectra. © 2012 Wiley Periodicals, Inc.     

锌掺杂对TiO2染料敏化电池光阳极中电荷俘获态分布及电子复合过程的影响

基于瞬态光电压和瞬态光电流技术研究了锌掺杂的TiO2染料敏化太阳能电池中电子复合及传输的动力学行为.通过实验获得了不同阳极掺杂条件下的电子复合时间常数与电子收集时间常数,考察了锌掺杂对电池阳极材料导带能级和电子俘获态的影响.研究结果表明,锌的掺杂在提高TiO2导带能级的同时延长了俘获态电子的复合时间常数,从而大大提高了电池的开路电压.     

Assessment of mobility of heavy metals in two soil types by use of column leaching experiments and chemometric evaluation of elution curves

The objectives of this study were to evaluate the mobility of heavy metals (HMs) in two types of soils (acidic forest soil and neutral agricultural soil) by leaching with calcium chloride solution in column experiments. The screening properties of neutral agricultural soil towards pollution by heavy metals (Ni, Cu, Zn and Cd) are approximately 10 times higher than those of acid forest soil. The neutral agricultural soil, polluted artificially by one pore volume (PV) of an HMs solution of concentration 200 mg L^?1, can screen the leaching of these metals over several hundreds of years. The higher apparent desorption rate and per cent desorption of HMs (especially Cd) in acid forest soil indicated a higher potential of intensive migration of the metals across the profile and indicated potential risk of Cd pollution for this type of soil. The latest approach of artificial neural networks to describe transport of HMs in soil has been also evaluated. Using a simple three-layer perceptron topology with three hidden neurons, the experimental data could be simulated. The results suggested that the pH of soil is a major factor controlling the retention of the heavy metals in the soils.