Electron and light microscopical investigation of defect structures in mesophases of pharmaceutical substances

 Transmission electron microscopy of freeze fractured and replicated samples (TEM) and polarizing light microscopy (PLM) are used to investigate the defect structures of the thermotropic and lyotropic mesophases of the non-steroidal antiinflammatory drug fenoprofen sodium and of the thermotropic mesophase of the nonionic surfactant sucrose oleate (O1570). All mesophases have a layered, smectic structure. The thermotropic liquid crystal of feno-profen sodium is an interdigitated smectic A phase (smectic Ad) having the highest viscosity of the investigated samples. The thermotropic mesophase of the sugar ester is also of the type smectic A, likely to be of subtype smectic A2 (bilayered smectic structure). The lyotropic mesophase is of lamellar liquid crystalline nature and has a much lower viscosity than the thermotropic mesophases. In the PLM the lyotropic fenoprofen mesophase has a strong tendency to form a pseudoisotropic texture, indicating a strong tendency to form undisturbed layered structures. Other textures exhibited in the PLM are fan-shaped texture and maltese-cross texture. Confocal domains, cylinders, pits and peaks as well as screw dislocations are found in great number in the TEM. However, no greater regions of undisturbed lamellar arrangement in the lyotropic mesophase could be detected. The only texture of the thermotropic fenoprofen mesophase visible in the PLM is the fan-shaped texture, indicating confocal domains as predominant structural elements. However, no confocal domains (tori or Dupin cyclides) are found in the TEM. In the PLM the sugar–ester mesophase exhibited a fan-shaped texture, maltese crosses and oily streaks as dominant textures. In the TEM only a few +π and −π disclinations and imperfect confocal domains could be detected. The discrepancies in the appearance of defect structures and textures between the mesophases as well as the discrepancies in the findings in the PLM and in the TEM investigations are caused by the different sample preparation and the different viscosities of the mesophases. Received: 28 May 1997 Accepted: 2 September 1997     

DFT study of the conductance of molecular wire:The effect of coupling geometry and intermolecular interaction on the transport properties

The density functional theory (DFT) combining with the non-equilibrium Green functions (NEGF) method is applied to the study of the electronic transport properties for a Di-thiol-benzene (DTB) molecule coupled to two Au(111) surfaces. The dependence of the transport properties on the bias, the coupling geometry of the molecule-electrode interface, and the intermolecular interaction are examined in detail. The results show that the existence of the hydrogen atom at the end of the DTB molecule would significantly decrease the transmission coefficients, and then the differential conductance (dI/dV). By changing the position of the DTB molecule located between two electrodes a maximum value of calculated current is observed. It is also found that the intermolecular interaction will strongly influence the transport properties of the system studied.     

Energy filtered transmission electron microscopy for the physico-chemical characterization of aquatic submicron colloids

A combination of energy filtered transmission electron microscopic (EF-TEM) procedures is proposed for the non-perturbing physico-chemical characterization of submicron mineral and organic colloids in aquatic systems. Synthetic hematite microparticles and xanthan polysaccharides were used as well-characterized model colloids in order to determine the optimum EF-TEM analysis conditions. In this paper, it is demonstrated that (i) our model colloids are morphologically representative of naturally occurring mineral/organic associations, (ii) EF-TEM allows the detection of fine xanthan ultrastructures without artefacts of conventional staining methods and (iii) submicron hematite particles can be specifically visualized and spectrometrically measured by EF-TEM within a hematite/xanthan mixture. This EF-TEM procedure appears to be appropriate for the characterization of real aquatic samples.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

The Crystal Structure of Sr2TiSi2O8

Sr₂TiSi₂O₈ single crystals were grown by Czochralski pulling and from a high-temperature solution. X-ray diffractometry revealed the modulated crystal structure of Sr₂TiSi₂O₈ to belong to the 5D superspace group P4bm (−α, α, 1/2; α, α, 1/2) with α=0.3. Atomic positions, anisotropic displacement factors and positional modulation parameters for Sr₂TiSi₂O₈ are determined and discussed. The positional modulation is further investigated by electron diffraction and high-resolution transmission electron microscopy. In the latter experiments, the 2D modulation appears to be superimposed by some 1D modulation waves. This effect is discussed in terms of growth conditions.     

Novel properties of molecular assemblies of isoprenoid surfactants

Unlike micelles of straight hydrocarbon chain-surfactants, isoprenoid surfactants, CH₃ [CH(CH₃)CH₂CH₂CH₂]₃ CH(CH₃)CH₂–R (R=CH₂N⁺ (CH₃)₃ Br^–, CH₂OPO₃H^– Na⁺, CH₂OSO ₃ ^– Na⁺, CO ₂ ^– Na⁺), gave large globular and cellular assemblies in water which could be observed directly by transmission electron microscopy; critical micelle concentration of 0.31.4×10^–3 M at 20°C, aggregation number of 215×10⁴, and diameter of 200–2000 Å. A basic structure of the assemblies was a thin layer with a thickness (about 30 Å) which was close to the molecular length of the surfactants. The assemblies were decomposed during gel column chromatography; viz., they were not as stable as the liposomes of lecithins. The morphology was discussed in conjunction with a steric effect of the isoprenoid chain.     

无烟煤结构的高分辨电镜研究

镜质组不仅是煤结构变化最具规律性，也是影响煤质的主要微成分。用点分辨率为２．１Ａ的高分辨电镜对几种不同煤化程度的无烟煤大分子结构进行了研究。结果表明：电镜图像直接表征了无烟煤分子的非均匀性孔隙结构。京西煤分子方向化程度强，主要以芳层平行堆或有序化前结构为主；晋城煤方向化程度弱，主要以粒状嵌晶结构为主。高分辨电镜技术是研究煤分子结构和煤化作用实质的有效方法。     

Theoretical study of molecular conduction: I. Effective Green's function based on perturbation theory

There have been many experimental and theoretical studies on molecular conduction, as it is a fundamental parameter in the study of molecular‐scale electronics. We have investigated the features of molecular conduction using a Green's function method, which has often been used to solve problems in quantum transport and is also effective in elucidating electron transport in molecules. We have obtained the novel effective Green's functions, including the first‐order energy corrections, by accommodating the self‐energy of the electrodes as perturbation terms. Although these approximate Green's functions only provide information on the first‐order energy corrections, they can involve the elementary properties of molecular conduction. We propose a scheme for the analysis of the relations between molecular orbitals and their roles in molecular conduction and present analytical calculations for normal and cyclic polyenes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

用透射电镜和火焰原子吸收法分析大气总悬浮颗粒物

以大气总悬浮颗粒物为主要研究对象,用透射电镜观察其形貌,污染特征明显;用火焰原子吸收法测定其水溶性常规元素K、Na、Ca和Mg。K、Na、Ca和Mg的检出限分别为0.105、0.124、0.259和0.237mg/kg,线性相关系数不低于0.9979,加标回收率为90.0%～95.0%,测定结果的相对标准偏差为0.6%～2.1%(n=6)。     

Characterization of chromate conversion coating on AA7075‐T6 aluminum alloy

Chromate conversion coatings (CCCs) on AA7075‐T6 were characterized using scanning electron microscopy, focused ion beam sectioning and scanning transmission electron microscopy with nano‐electron dispersive spectroscopy line profiling. The thickness and composition of the CCC was different at different locations on the heterogeneous microstructure of AA7075‐T6. The coating formed on the matrix phase was much thicker than that formed on the coarse Al–Cu–Mg, Al–Fe–Cu and Mg–Si intermetallic particles. Nano‐electron dispersive spectroscopy line profiling indicated that the coating on the Al–Fe–Cu particles was similar to the CCC formed on the phase matrix, primarily a chromium oxide. However, the coatings on the Al–Cu–Mg and Mg–Si particles were mixed Al/Mg/Cr oxide and Mg oxide, respectively. The growth of CCC followed a linear‐logarithmic kinetic rate law. The observations of this study support the sol‐gel model of CCC formation. Copyright © 2004 John Wiley & Sons, Ltd.