Improvement of pour point and oxidative stability of synthetic ester basestocks for biolubricant applications

For environmental reasons, as well as the dwindling source of petroleum, a new class of environmentally acceptable and renewable biolubricants based on plant oils is available. Even though plant oils possess excellent lubricant-related properties, there are some concerns about using it as biolubricant base oil. In this study we present a series of structures derived from oleic acid to be used as synthetic biolubricant basestocks. Measuring of pour point (PP), flash point, viscosity index (VI), oxidation onset temperature (OT) and signal maximum temperature (SMT) was carried out for each compound. Furthermore, the friction and wear properties were measured using a high-frequency reciprocating rig (HFRR). The resulting product structures were confirmed by NMR and FTIR spectroscopic analysis. The results showed that ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate with behenyl mid-chain ester exhibited the most favorable low temperature performance (PP ?48 °C) and ethylhexyl 9-(octanoyloxy)-10-(octyloxy)octadecanoate octyl mid-chain ester exhibited higher oxidation stability (OT 142 °C) than the other synthetic ester oils. On the other hand, the highest ball wear scan diameter was obtained for ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate while the lowest value was obtained for 9-hydroxy-10-octyloxyoctadecanoic acid. Overall, it was concluded that these synthetic ester oils have potential in formulation of industrial fluids for different temperature applications.     

Periodic solution of a chemostat model with variable yield and impulsive state feedback control

In this paper, a chemostat model with variable yield and impulsive state feedback control is considered. We obtain sufficient conditions of the globally asymptotical stability of the system without impulsive state feedback control. We also obtain that the system with impulsive state feedback control has periodic solution of order one. Sufficient conditions for existence and stability of periodic solution of order one are given. In some cases, it is possible that the system exists periodic solution of order two. Our results show that the control measure is effective and reliable.     

Internal waves in a two‐layer system using fully nonlinear internal‐wave equations

In order to understand the nonlinear effect in a two‐layer system, fully nonlinear strongly dispersive internal‐wave equations, based on a variational principle, were proposed in this study. A simple iteration method was used to solve the internal‐wave equations in order to solve the equations stably. The applicability of the proposed numerical computation scheme was confirmed to agree with linear dispersion relation theoretically obtained from variational principle. The proposed computational scheme was also shown to reproduce internal waves including higher‐order nonlinear effect from the analysis of internal solitary waves in a two‐layer system. Furthermore, for the second‐order numerical analysis, the balance of nonlinearity and dispersion was found to be similar to the balance assumed in the KdV theory and the Boussinesq‐type equations. Copyright © 2009 John Wiley & Sons, Ltd.     

非自治Lotka—Volterra竞争系统

讨论了一般ｎ个种群的非自治Ｌｏｔｋａ－Ｖｏｌｔｅｒｒａ竞争系统，给出了系统的正解灭绝的一个充分条件。文献「１，２」中的主要结果被很好地推广。     

Metal Ion Recognition. Interaction of New Oxygen-Nitrogen Donor Macrocycles with Selected Transition and Post-Transition Metal Ions

As part of an ongoing investigation of the factors influencing metal ionrecognition, we have investigated structure/function relationships involvingthe metal-ion binding by three new N-benzyl-substituted, 15- and 16-membered,macrocyclic ligands incorporating N₂O ₃- and N ₃O ₃-donor sets (withthe N ₃O ₃-system consisting of a N ₂O ₃-macrocyclic ring with an attachedCH ₂CH ₂NCH ₂C ₆H ₅ pendant arm). Selected solid complexes of thelatter ligand were isolated and the X-ray structures of individual Ni(II) and Ag(I) complexeswere obtained.Where solubility permitted, potentiometric titration studies in 95% methanolwere employed to investigate the binding affinities of all three ligand derivativestowards Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Ag(I) and Pb(II). The 15-memberedN ₂O ₃-ring was found to be selective for Ag(I) over the other six metalsinvestigated, including Cu(II). However, the presence of a further nitrogen donorin the form of the pendant benzylamine functionality in the N ₃O ₃-donorsystem results in an increase in its binding affinity for Ag(I) but an even greaterincrease occurs for Cu(II). As a consequence, the latter ion is now more stronglybound than Ag(I). The factors influencing these respective selectivities are discussed.     

石油沥青质在烃中的稳定性研究

石油是以沥青质为分散相的非水胶体体系[1,2 ] 。研究认为 ,石油中沥青质的沉淀和絮凝 ,对石油开采及输送有十分重要的影响 [3]。提高沥青质在石油中的胶体稳定性 ,可强化石油加工过程中的重油减压蒸馏、催化裂化、减粘裂化及延迟焦化等过程[1,2 ] ,是提高炼厂轻质油收率、改善产品质量、提高综合经济效益的重要途径。国外关于沥青质在烃类介质中的稳定性研究报道较多 ,大多侧重于胶质对沥青质的稳定作用。由于胶质和沥青质均为由多种复杂结构分子组成的混和物 ,探讨胶质对沥青质的稳定机理极端困难 ,Chia-Lu Chang[4 ]等定量讨论了沥青质…     

Active control of time-delay in cutting vibration

The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time-delay controller is developed based on discrete optimal control method for the turning vibrations control. Numerical simulations are carried out to verify the efficiency of the controller. Results indicate the designed controller can suppress the cutting vibration efficiently and improve the stability of the cutting processes. The influence of designed time-delay and sampling time on the control performance is also discussed.     

Development of poly(vinyl chloride)/montmorillonite nanocomposites using chelating agents

Different chelating agents such as poly(ethylene glycol), propylene glycol monooctadecanoate and palm oil were used for modification of the surface-treated montmorillonite (MMT). The work also included the development of a technique for mixing chelating agents with MMTs using different methods and different proportions of MMT/chelating agent/ethanol. Evaluation of the result of mixing was performed by thermogravimetric analysis, X-ray diffraction and high-resolution scanning electron microscopy (HR-SEM). The results showed that the chelating agents used were intercalated in MMT, increasing the interlayer spacing. The OMMT was used in the manufacture of composites with rigid PVC using a microcompounder. The master batch concept turned out to be promising in terms of dispersion and delamination of clay, as observed in HR-SEM photographs. However, despite good dispersion and exfoliation of MMT, poor compatibility between clay platelets and PVC matrix remains to be solved to enable full exploitation of its engineering potential. Despite this drawback, good thermal stability and mechanical properties have already been achieved.     

Thermo-cleavable polymers: Materials with enhanced photochemical stability

Photochemical stability of three thermo-cleavable polymers was investigated as thin films under atmospheric conditions. A significant increase in lifetime was observed once the side-chain was cleaved emphasizing the detrimental effect of solubilizing groups on the photochemical stability of conjugated polymers. In addition to their ease of processing, thermo-cleavable polymers thus also offer a greater intrinsic stability under illumination.