混凝土与纤维混凝土的劈裂试验及损伤描述

描述工程材料在服役期间所受到的损伤，是评估其可靠度、耐久性等指标的重要依据，本文根据混凝土与纤维混凝土劈裂试验的结果，对一些损伤模型存在的问题进行的探讨认为：对于混凝土复合材料，卸载曲线的斜率受到粗骨料和纤维等因素的干扰，卸载刚度的衰减不能精确描述损伤的演化，并且，针对不同的极限状态，损伤描述应该有不同的形式，针对损伤对混凝土抗渗性能的影响问题，本文提出了损伤描述表达式。     

不同形式非线性薛定谔方程及其分步傅里叶法求解

讨论光通信中脉冲的准单色光光场的正负频表示,正负频形式的傅里叶变换,正负频形式的非线性薛定谔方程及它们之间的关系.尤其在脉冲频谱的求解问题中,如果采用负频形式的非线性薛定谔方程则必须选取负频形式的傅里叶变换;如果采用正频形式的非线性薛定谔方程则必须选取正频形式的傅里叶变换.采用分步傅里叶法对具体实例进行数值求解,验证了讨论结果.     

多功能SHPB装置及水泥石材料的动态性能研究

为了研究在一定温度和压力下的水泥石的动态力学性能，研制了多功能ＳＨＰＢ材料动态性能测试装置，该装置可分别进行材料的拉伸，压缩，扭转性能测试，拉，压试验可以在带围压和温度的三向应力状态下进行，文中还对水泥石改性材料的动态力学性能进行了实验研究。     

双频氦氖激光回馈位移测量系统的实验与应用研究

研究了一种全新的纳米尺度位移测量系统。将双折射元件插入He-Ne激光器谐振腔内产生频率分裂效应，使原本单模谐振的激光器输出变成了频差可调的2个正交偏振频率（o光和e光），而形成双频激光器。在激光谐振腔外放置沿激光轴线位移的反射表面，将输出的激光束反射回腔内，以便对激光的光强进行调制，可实现高分辨率非接触式可判向位移测量。提出了一种细分方法，该方法突破了传统干涉系统的衍射极限（1/2波长）。对于633nm波长He-Ne激光，本系统的理想分辨率为1/8波长（约为79nm）。     

区域立体物流网络规划模型与算法

提出长株潭区域立体物流网络建构及其网络优化设计.精细化定义了模式分担率,构建了更切合实际的双准则双层规划模型.下层规划描述各核心城市物流枢纽间基于多模式多层阶交通条件下的用户选择行为,上层规划追求最小化长株潭区域立体物流网络系统广义物流费用并最大化整个网络的物流运输量,以满足城市群区域经济发展对物流提出的更高要求.给出了可以克服Frank-Wolfe方法缺陷的惩罚Lagrange对偶方法求解下层规划算法,设计了基于实数编码和组合变异的双层规划改进遗传算法,算法可以保证搜索到近似全局最优解.     

基于三角谐振环的新型六边形谐振环金属线复合周期结构左手材料性质研究

通过实验及仿真研究了三角谐振环组合新型六边形谐振环金属线复合周期结构左手材料.仿真研究了以金属铜三角开口谐振环（SRRs）为基本单元的周期结构负磁导率材料,与闭口环（CSRRs）结果对比发现三角开口谐振环能产生很好的谐振效果即能产生负磁导率,并且多层单元仿真发现多个谐振环耦合能提高谐振频率并加宽谐振频段;设计、制作并实验和仿真研究了三角开口环为基本单元的六边形谐振环金属线复合周期结构左手材料,仿真结果在98GHz附近出现良好负折射效应,实验验证在93—108 GHz出现良好负折射效应,与仿真结果具有良好的一致性.该研究对新型周期结构左手材料的研究、设计和研制具有重要的科学意义和应用前景. 关键词： 左手材料 三角环组成的六边形谐振环 负折射     

Dynamic compressive responses of intact and damaged ceramics from a single split Hopkinson pressure bar experiment

A novel dynamic compressive experimental technique has been developed based on a split Hopkinson pressure bar. This new method dynamically loads the ceramic specimen by two consecutive stress pulses. The first pulse determines the dynamic response of the intact ceramic materiaal and then crushes the specimen, and the second pulse determines the dynamic compressive constitutive behavior of the ceramic rubble. Precise pulse shaping ensures that the specimen deforms at nearly constant strain rates under dynamic stress equilibrium during the loading by both stress pulses. Pulse shaping also controls the amplitudes of loading pulses, the values of strain rates, the maximum strains in the rubble specimens, and the proper separation time between the two loading pulses. The feasibility of the new technique is demonstrated by the experimental results obtained on an AD995 alumina.     

The role of ion-pairing in peak deformations in overloaded reversed-phase chromatography of peptides

The paper reports a study on the role of ion-pairing behind peak deformations, e.g. peak splitting and even peak disappearance, during the elution of a peptide at highly overloaded conditions in reversed-phase chromatography. Deformation of component peaks is not uncommon in chromatography. There are reports which discuss their occurrence, but mostly at analytical scale, while their occurrence is quite common also in the preparative scale, as in the case discussed in this work. This paper first describes the conditions leading to peak splitting and peak disappearance of an industrial peptide, then explains the plausible reasons behind such behaviour, and finally with experimental analysis demonstrates the role of ion-pairing in causing such behaviour.     

Dynamic Scheduling on a Single Batch Processing Machine with Split Compatibility Graphs

We consider the problem of minimizing the makespan on a batch processing machine, in which jobs are not all compatible. Only compatible jobs can be included into the same batch. This relation of compatibility is represented by a split graph. Jobs have release dates. The capacity of the batch processing machine is finite or infinite. The processing time of a batch is given by the processing time of the longest job in the batch. We establish the NP-hardness of the general problem and present polynomial algorithms for several special cases. Relating scheduling theory and graph theory appears to be an interesting and important concept.     

黏性不可压流体的自适应网格技术和基本特性方程分离算法的联合分析

组合基本特性方程分离算法和自适应网格技术,分析二维黏性不可压流体.该方法使用3节点三角单元,对速度分量和压力等变量分析,使用等阶次的插值函数.组合解法的主要优点在于,在自适应网格技术中,对解梯度变化大的区域,通过耦合误差估计生成小的单元,利于提高解的精度,在其它区域生成大单元,可以节省时间.最后,通过对一个黏性流体圆柱体绕流问题的瞬态和稳态特性分析,给出了组合解法性能的评价.