MASS TRANSFER EXPERIMENTS ON SINGLE IRREGULAR-SHAPED PARTICLES

Mass transfer from irregular-shaped naphthalene particles (100-200 inn in size) was studitd in an electrodynamic balance. Charged particles were suspended in an electrostatic field directly in line with a calibrated air jet. Mass and size change histories were obtained under ambient conditions, and under steady- and pulsed-flow conditions. For natural convection, the time-averaged Sherwood number was similar to that for spheres. Forced-convection Sherwood number under steady-flow conditions was strongly dependent on particle shape and panicle Reynolds number, and was consistently higher than values predicted for spheres at comparable Reynolds numbers. This study validates the technique and indicates the shape effect on mass transfer form single particles.     

Octapeptide-Specific and Sensitive Assay for Angiotensin II in Plasma

Abstract

Angiotensin-(1–8)octapeptide (angiotensin II) is the active principle of the reninangiotensin system. Crossreaction of angiotensin II-antisera with inactive precursors and metabolic fragments prevented the specific quantitation of this hormone in biological fluids. Peptide-extraction on bonded-phase silica followed by peptide-separation using isocratic reverse-phase high performance liquid chromatography and subsequent radioimmunoassay rendered possible the octapeptide-specific measurement of angiotensin II in 2 ml plasma with a detection limit of 0.4fmol/ml. The coefficient of variation for intra-assay precision was 0.06 and for inter-assay precision 0.13. ¹²⁵Iangiotensin II was recovered from plasma by solid-phase extraction to 99±2% (mean ± S.D.). The overall recovery of 5, 10 and 20 fmol unlabeled angiotensin II added to plasma was 80±10%. Plasma concentrations in supine normal humans averaged 4.1 ± 1.6 fmol/ml and were suppressed below the detection limit by angiotensin I converting enzyme inhibition.     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).     

简单方法制备与表征新颖复合凝胶及表面微结构——由科研成果转化的化学综合实验

材料表面的微结构会赋予材料独特的性能，水凝胶在生物医学领域有广泛的应用前景。采用紫外光刻蚀法创新性地实现了复合凝胶的制备和凝胶表面图案化微结构的构筑一步完成；通过原子力显微镜和光学显微镜的表征，复合凝胶聚N-异丙基丙烯酰胺/聚乙二醇二丙烯酸酯兼具了温敏性能与图案化微结构的新颖性能结构特征。本实验有助于培养学生的创新意识，激发学生的学习兴趣以及未来从事科研的兴趣。     

环路跟踪卡尔曼滤波算法的性能分析

基于卡尔曼滤波的环路跟踪算法多是通过一定仿真证明算法性能,没有系统性性能评估,难以较好指导工程应用。在原有算法基础上进行了优化,并系统性地对比分析、评估了基于卡尔曼环路滤波算法性能,以期为算法工程化提供指导。首先提出对跟踪环路反馈调整量进行预测,使之更符合系统实际,减小环路跟踪误差。而后基于卫星信号模拟器输出信号和自生产信号源,充分评估基于卡尔曼滤波环路跟踪算法的收敛时间和灵敏度。仿真结果表明,相比目前工程常用的二阶FFL辅助三阶PLL算法,基于卡尔曼滤波环路跟踪算法能够缩短环路所需稳定时间约90%,并能提升跟踪灵敏度约5 d B,有效改善弱信号场景中接收机输出信息的完好性和连续性。     

IMPORTANCE MEASURE OF CORRELATED VARIABLES IN POLYNOMIAL OUTPUT

为了解决一般工程问题中输出量为多项式情况下相关正态输入变量的贡献识别问题，以二次不含交叉项的多项输出量为例，利用多维相关正态分布及其条件分布的性质，解析地推导了相关正态输入变量对输出量总方差的独立贡献及相关贡献，采用算例验证了所推导的解析表达式的正确性．文中所推导的相关正态变量独立贡献和相关贡献的表达式可直接用于输出量为二次不含交叉项多项式或一次多项式情况下的输入变量贡献的识别，并且为其他新的算法提供了对照解，另外此方法亦可以推广至含交叉项的高阶多项式，解决更为复杂输出量情况下输入量的贡献识别问题．     

Bayesian robustness under a skew-normal class of prior distribution

We develop a global sensitivity analysis to measure the robustness of the Bayesian estimators with respect to a class of prior distributions. This class arises when we consider multiplicative contamination of a base prior distribution. A similar structure was presented by van der Linde [12]. Some particular specifications for this multiplicative contamination class coincide with well known families of skewed distributions. In this paper, we explore the skew-normal multiplicative contamination class for the prior distribution of the location parameter of a normal model. Results of a Bayesian conjugation and expressions for some measures of distance between posterior means and posterior variance are obtained. We also elaborate on the behavior of the posterior means and of the posterior variances through a simulation study.     

Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity

The properties and behaviour of an α−β colony Ti-6242 alloy have been investigated at 20 °C utilising coupled micro-pillar stress relaxation tests and computational crystal plasticity. The β-phase slip strength and intrinsic slip system strain rate sensitivity have been determined, and the β-phase shown to have stronger rate sensitivity than that for the α phase. Close agreement of experimental observations and crystal plasticity predictions of micro-pillar elastic-plastic response, stress relaxation, slip activation in both α and β-phases, and strain localisation within the α−β pillars with differing test strain rate, β morphology, and crystal orientations is achieved, supporting the validity of the properties extracted. The β-lath thickness is found to affect slip transfer across the α−β−α colony, but not to significantly change the nature of the slip localisation when compared to pure α-phase pillars with the same crystallographic orientation. These results are considered in relation to rate-dependent deformation, such as dwell fatigue, in complex multiphase titanium alloys.     

Enhanced process development using automated continuous reactors by self-optimisation algorithms and statistical empirical modelling

Reaction optimisation and understanding is fundamental for process development and is achieved using a variety of techniques. This paper explores the use of self-optimisation and experimental design as a tandem approach to reaction optimisation. A Claisen-Schmidt condensation was optimised using a branch and fit minimising algorithm, with the resulting data being used to fit a response surface model. The model was then applied to find new responses for different metrics, highlighting the most important for process development purposes.     

Characterization of surfactant complex mixtures using Raman spectroscopy and signal extraction methods: Application to laundry detergent deformulation

This paper presents the analysis of surfactants in complex mixtures using Raman spectroscopy combined with signal extraction (SE) methods. Surfactants are the most important component in laundry detergents. Both their identification and quantification are required for quality control and regulation purposes. Several synthetic mixtures of four surfactants contained in an Ecolabel laundry detergent were prepared and analyzed by Raman spectroscopy. SE methods, Independent Component Analysis and Multivariate Curve Resolution, were then applied to spectral data for surfactant identification and quantification. The influence of several pre-processing treatments (normalization, baseline correction, scatter correction and smoothing) on SE performances were evaluated by experimental design. By using optimal pre-processing strategy, SE methods allowed satisfactorily both identifying and quantifying the four surfactants. When applied to the pre-processed Raman spectrum of the Ecolabel laundry detergent sample, SE models remained robust enough to predict the surfactant concentrations with sufficient precision for deformulation purpose. Comparatively, a supervised modeling technique (PLS regression) was very efficient to quantify the four surfactants in synthetic mixtures but appeared less effective than SE methods when applied to the Raman spectrum of the detergent sample. PLS seemed too sensitive to the other components contained in the laundry detergent while SE methods were more robust. The results obtained demonstrated the interest of SE methods in the context of deformulation.