核动力航空推进探析

文献调研国外核动力航空推进相关技术研究,美国GE与PW公司通过ANP计划已试验验证了核动力航空推进的可行性;分析认为核动力航空推进当前最佳用途是长航时无人机与巡航导弹动力,关键技术是核屏蔽的轻量化设计、热交换效率与速率、热力系统设计与新型结构问题;核动力航空推进若采用蒸汽介质的二回路闭式循环驱动螺旋桨,蒸汽透平及动力系统设计没有技术障碍,闭式循环蒸汽流量关键取决于蒸汽透平汽耗率与热交换循环时间。     

Reprint of : Shot noise fluctuations in disordered graphene nanoribbons near the Dirac point

Random fluctuations of the shot-noise power in disordered graphene nanoribbons are studied. In particular, we calculate the distribution of the shot noise of nanoribbons with zigzag and armchair edge terminations. We show that the shot noise statistics is different for each type of these two graphene structures, which is a consequence of the presence of different electron localizations: while in zigzag nanoribbons electronic edge states are Anderson localized, in armchair nanoribbons edge states are absent, but electrons are anomalously localized. Our analytical results are verified by tight binding numerical simulations with random hopping elements, i.e., off diagonal disorder, which preserves the symmetry of the graphene sublattices.     

Dependence of stresses on grain orientations in BCC polycrystalline films on substrates

Most thin films have different thermal expansion coefficients from their substrates, thus thermal stresses will be introduced into the films when the temperature is changed during annealing and service. Calculations of these stresses for grains in various crystallographic orientations have been made for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic and the stresses are equiaxial and without grain orientation （hkl） dependence, the BCC metals may be grouped into two classes. In the first class （Cr, Mo, Nb and V）, the （100）-oriented grains have the largest stresses, while the stresses σ1 and σ2 in other （hkl）-oriented grains decrease linearly with the increase of the angle between （hkl） and （100）, and with σ1 〈 σ2 except in （100）- and （lll）-oriented grains. In the second class （Fe and Ta）, on the contrary, the （100）-oriented grains have the lowest stresses, and the stresses σ1 and σ2 in other （hkl）-oriented grains increase linearly with the increase of the angle between （hkl） and （100）, and with σ1 〉 σ2 except in （100）- and （111）-oriented grains.     

一种新型桥路型HTSFCL的实验研究

在研究一种新型桥路型高温超导限流器的限流原理的基础上，研制开发了一台三相600V、故障电流峰值100A的实验室样机．本文介绍了该限流器的功率电路、控制器、低温容器和高温超导磁体等部分的结构特点和功能．在三相系统中进行了各种短路故障限流实验，结果表明该限流器有较强的限流能力和重合闸能力，说明新型高温超导限流器的研究对改善电网动态性能和提高电网电能质量有十分重要的意义．     

对于自共振激光加速器中轴向场问题的讨论

从洛仑兹力方程的旋量形式出发，讨论了电磁场中电荷运动的轴向电场和轴向磁场问题以及平面波的脉冲和Larmor功率。这些问题是研究自共振激光加速器的基础。From the spinorial form of the Lorentz force equation, the problems about axial electric field and axial magnetic field of charge motion in electromagnetic fields, as well as plane wave pulse and Larmor power have been discussed in this paper. These problems are the foundation of studying the autoresonance laser accelerator (ALA).     

太阳能电池基本特性测定实验 --一个与能源利用有关的综合设计性实验

“太阳能电池基本特性测定”是与能源利用有关的新的综合性设计实验．本文简述了该实验的原理、实验方法及测量结果,得出了太阳能电池基本参数短路电流Iac,开路电压Uoc与太阳能电池接收到的相对光强度J／Jn的近似函数关系。     

循环倍率对动力和液体燃料多联产系统的电与蒸汽自平衡影响分析

本文以煤气化(240万吨/年)动力,液体燃料(甲醇,醋酸,醋酐)多联产系统(串联式)为研究对象,分析了循环倍率对系统动力输出、蒸汽、液体燃料产量的影响;确定了可满足具有不同优先级的目标、达到系统动力和蒸汽自平衡的循环倍率、燃气轮机选型等关键单元和系统参数。     

两种新型芴类衍生物的三光子吸收特性研究

研究了两种新型芴类衍生物9，9_二（2_乙基已基）_2，7_二咔唑_9H_芴（简记为DCZF）和9 ，9_二（2_乙基已基）_2，7_二（2_（4_甲氧基）苯_2，1_乙烯基）芴（简记为BMOSF）在N ，N_二甲基甲酰胺（DMF）中的线性吸收和单光子荧光行为，并用脉冲宽度为38ps，重复 频率为10 Hz的1064 nm Nd：YAG脉冲激光研究了两种化合物的三光子吸收性质.结果表明： 两种新材料的最大线性吸收峰分别位于330和380nm，吸收区域覆盖了270—420 nm波段. 两种化合物的荧光带位于蓝_紫区，中心波长为369和442 nm，都具有较小的斯托克斯位移. 化合物DCZF和BMOSF的三光子吸收系数分别为γ_DCZF=678×10^{- 20} cm3/W²和γ_BMOSF=592×10^-20 cm³/W². 同时， 两种新材料还表现出明显的三光子吸收光限幅效应，当入射光强分别为8和6GW/cm²时，非线性透过率分别达到30%和45%. 关键词： 芴类衍生物 三光子吸收 光限幅 非线性透过率     

First-principles study of lithium intercalated bilayer graphene

Lithium intercalated bilayer graphene has been investigated using first-principles density functional theory calculations. Results show that there exist AB and AA stacking sequences for bilayer graphene in which the latter is more favorable for the Li storage and the former will evolve into the latter with the intercalation of Li ions. The relationship between the interlayer distance of two graphene sheets and the intercalated capacity of Li ions is discussed. It is found that structural defect is identified to store Li ions more favorably than pristine bilayer graphene and an isolated C atom vacancy in bilayer graphene can capture three Li ions between two graphene sheets.     

Performance enhancement on mechanical and electrical effects for on-line fiber-optic bending loss measurement

For an automatic testing of the fiber bending loss parameter, we proposed an on-line fiber optic bending loss measurement system. Many impact factors from the supporting systems, free space coupling alignment, external spatial perturbation device and the other automatic testing systems may degrade the on-line fiber-optic bending loss measurement system. We reduce those impact factors and show the mechanical and electrical improvement in this paper. The accuracy can be improved by 3–5 dB for the proposed on-line bending loss measurement system. Development of an on-line fiber-optic bending loss measurement system can provide a fast-checking solution for jump-line quality improvement on fiber-from-the-desk (FFTD) access network.