Density functional calculations of NMR chemical shifts and ESR g-tensors

An overview is given on recent advances of density functional theory (DFT) as applied to the calculation of nuclear magnetic resonance (NMR) chemical shifts and electron spin resonance (ESR) g-tensors. This is a new research area that has seen tremendous progress and success recently; we try to present some of these developments. DFT accounts for correlation effects efficiently. Therefore, it is the only first-principle method that can handle NMR calculations on large systems like transition-metal complexes. Relativistic effects become important for heavier element compounds; here we show how they can be accounted for. The ESR g-tensor is related conceptually to the NMR shielding, and results of g-tensor calculations are presented. DFT has been very successful in its application to magnetic properties, for metal complexes in particular. However, there are still certain shortcomings and limitations, e.g., in the exchange-correlation functional, that are discussed as well. Received: 24 October 1997 / Accepted: 19 December 1997     

Structure-NMR chemical shift relationships for novel functionalized derivatives of quinoxalines

(1)H, (13)C and (15)N NMR chemical shifts for a variety of novel quinoxalines were determined by different 2D methods and were calculated using the GIAO DFT approach. Comparison with experimental data shows good correlations in the case of (1)H, (13)C and (15)N chemical shifts. Different combinations of basis sets were tested. In non-polar solvents quinoxalines exist as dimers owing to strong hydrogen bonding. Calculations for dimers improve the correlation between experiment and theory. Additive empirical methods for estimating chemical shifts have drawbacks and have to be used with a great care for this type of compound.     

Study of intermolecular interactions in aqueous solutions by millimeter spectroscopy

The absorption of millimeter electromagnetic radiation (v=1.4, 1.71, and 5 cm⁻¹) by aqueous solutions of glycine (pH 6.1–6.2) in the concentration range of 0.5–2.5 mol L⁻¹ was measured. It was found that the absorbing ability of the water present in the solutions, is higher than that of pure water. This phenomenon is explained by the presence of a center of negative hydration in the structure of the glycine zwitterion, which results in an increase in the rotational mobility of water molecules immobilized in the hydrate shell of the glycine zwitterion. For Part 5, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1305–1307, July, 1997.     

Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Applicability of the H NMR chemical shifts computed by the ab initio/GIAO-HF methodology to the study of geometrical features of Zn-porphyrin dimers

Several porphyrin dimers have been newly designed and synthesized to construct assemblies with 1,4-diazabicyclo[2.2.2]octane (DABCO) as a bidentate binding ligand. Semi empirical (AM1) and ab initio calculations have been used to study the assemblies generated by the organization of dimers and DABCO, including the computation of ¹H NMR complexation-induced chemical shifts using the ab initio/GIAO methodology. The diagnostic capacity of the theoretical method has been applied to explain experimental results and geometrical features of the complexes.     

The effect of the solvents on the specific intramolecular C-H...N interactions studied by1H NMR spectroscopy

The analysis of the effect of the solvents on the proton chemical shifts in¹H NMR spectra of 2-vinyloxypyridine indicates that the C—H...N interaction of weak intramolecular hydrogen bond type hinders the formation of intermolecular hydrogen C—H...X and C-H... bonds. The protonating solvents reduce the intramolecular C—H...N interaction due to association with the N atom of the pyridine cycle.Translated fromIzvestiya Akademii Nauk. Seriya Khimieheskaya, No. S, pp. 1202–1204, May, 1996.     

Mass spectrometer-wall probe diagnostic of Ar discharges containing SF6 and/or O2: Reactive ions in etching plasmas

Positive and negative ions of Ar/SF₆ and Ar/SF₆/O₂ plasmas (etching plasmas) and of Ar/O₂ plasmas (cleaning plasmas) in Pyrex tubes have been investigated using a mass spectrometer-wall probe diagnostic technique. The measurement of negative ions proved to be a very sensitive method for the detection of wall material. In etching plasmas with small admixtures of SF₆, oxygen was found as the only representative of wall material. At larger amounts of SF₆, silicon could be detected. In cleaning plasmas with small admixtures of O₂ applied to a previously etched Pyrex surface, fluorine was found, indicating the reversal of fluoridation by oxygenation.     

H, C, N NMR, ESI mass spectral and single crystal X-ray structural characterization of three spiro[pyrrolidine-2,3′-oxindoles]

Three spiro[pyrrolidine-2,3′-oxindoles], 1,1′,2,2′,5′,6′,7′,7′a-octahydro-2-oxo-1′-phenyl-spiro[3H-indole-3,3′-[3H]-pyrrolizine]-2′-carboxylic acid methyl ester (1), 1,1′,2,2′,5′,6′,7′,7′a-octahydro-2-oxo-1′-nitro-2′-phenyl-spiro[3H-indole-3, 3′-[3H]-pyrrolizine] (2) and 1,1′,2,2′,5′,6′,7′,7′a-octahydro-2-oxo-1′-nitro-2′-(4″-chlorophenyl)-spiro[3H-indole-3,3′-[3H]-pyrrolizine] (3) have been synthesized and their ¹H, ¹³C and ¹⁵N spectra assigned. The chemical shift assignments are based on Pulsed Field Gradient (PFG) Double Quantum Filter (DQF) ¹H, ¹H correlation spectroscopy (COSY), PFG ¹H, ¹³C Heteronuclear Multiple Quantum Coherence (HMQC) and PFG ¹H,X (X = ¹³C and ¹⁵N) Heteronuclear Multiple Bond Correlation (HMBC) experiments. The single crystal X-ray structures of 1–3 have been determined. Compounds 1 and 2 crystallized in monoclinic space group C2/c and compound 3 in monoclinic space group P2₁/c, respectively. Also the ESI-TOF MS data of 1–3 are given.     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.