Analysis of long-term distributions of calibration parameters and calibration intervals for an atomic absorption spectrophotometer

 A combination of "black box" and "calendar-time" methods for the determination of calibration intervals of an analytical measuring instrument is discussed. Since the methods require information on the distributions of the calibration parameters, such information is described for an atomic absorption spectrophotometer, as an example. The hypotheses on the normal distribution of the calibration parameters are tested using the ω²-criterion and accepted at 0.90–0.95 levels of confidence. Corresponding control charts are designed for indication of warning and action limits of the calibration parameters, and diagnoses of outliers in further calibrations. Control charts indicate also when the calibration should be done according to the full program of the equipment manufacturer. Received: 15 April 2000 / Accepted: 24 July 2000     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

反应条件对煤加氢热解产物分布的影响

本文以内蒙古红庙煤为研究对象，在温度４５０－６５０℃和氢氯压力２－５ＭＰＡ的范围内，在加压固定床反应器上考察了各种因素包括传质作用对煤加氢热解产物分布的影响。研究表明，转化率和焦油收率随最终反应温度，氢气压力和流速的升高而升高，随加速速率的增大而降低。     

Polarographic Behaviour and Determination of Kinetic Parameters of Lead-Pamoate Complex in Dimethyl Sulfoxide

The polarography of lead ion in dimethyl sulfoxide (DMSO) was investigated in the DMSO concentration range 0–80 vol.%. The complex species identified were Pb₂(DMSO)⁴⁺₃, Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₆ in [DMSO]<10 vol.%, 10< [DMSO]<43 vol.% and [DMSO]>43 vol.%, respectively. In the presence of pamoic acid, the reduction of lead ion in DMSO was two-electron reversible diffusion-controlled at pH≤6.0, but it became irreversible at pH>6.0. The complex species identified was Pb(D_m)₂(P_m)₃(OH)^6? at pH>6.0. The rate constants of electro-reduction and electro-oxidation, activation energies were determined. The hydrolysis constants of lead ion in dimethyl sulfoxide concentration 40–70 vol.% at pH 4.5–6.0 were found to be of the order of 10^?6. The stability constants of the Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₀ were also determined to be of the orders of 10¹ and 10⁵, respectively.     

Calorimetric study of thermodynamics of production of polybutene-1, polypentene-1, 4-methylpentene-1 and properties of reagents between 0 and 670 K

The heat capacitiesC ₀ ^p of polybutene-1, polypentene-1, poly-4-methylpentene-1 and 4-methylphentene-1 were studied calorimetrically from 6 to (500–700) K. Temperatures, enthalpies of melting of various crystalline forms and the parameters of the glass transition were determined. The thermodynamic functionsH ⁰(T)?H⁰(0), S⁰(T) andG ⁰(T)?H⁰ (0) were calculated between 0 K and (500–700) K. From the calorimetric values obtained and literature data, the thermodynamic characteristics of the following processes were estimated for the corresponding alkenes-1, andcis-andtrans-alkenes-2: the polymerization of alkenes-1, the monomer-isomerization polymerization ofcis- andtrans-alkenes-2 to polyaklenes-1 and the isomerization ofcis- andtrans-aklenes-2 to alkenes-1 in the same temperature interval at standard pressure.     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.     

Thermodynamic parameters ΔΔH and ΔΔS as probes for the transition state in the reaction of N-phenyltriazolinedione with alkenes in nucleophilic solvents

The thermodynamic parameters, ΔΔH^# and ΔΔS^#, were determined for the interception of an intermediate, with the structural characteristics of an aziridinium imide, by nucleophilic solvents during the reaction of 2-methyl-2-butene with N-phenyltriazolinedione. The experimentally measured parameters were found to be in favor of an S_N2-‘like’ transition state and showed strong dependence on the bulkiness of the incoming molecule of the nucleophile-solvent.     

Influence of molecular weight on the thermal decomposition of hydroxyl terminated polybutadiene

Thermogravimetric analysis of hydroxyl terminated polybutadiene (HTPB) and its fractions of different molecular weights separated by preparative GPC shows two major stages of weight loss of different nature in a nitrogen atmosphere. The first stage is primarily depolymerisation, cyclisation and crosslinking of molecules and the second stage is mainly the decomposition of the residue from the first stage. The kinetic parameters, viz. activation energy E and pre-exponential factor A using four different non-isothermal integral equations show a systematic increase with increase in molecular weight for the first stage, whereas for the second stage, the effect of molecular weight on E and A values is not prominent. The increase in E and A values for the first stage is attributed to the formation of greater number of cyclised and crosslinked products from molecules of higher dimensions. Quantitative correlations between the kinetic constants and the molecular weight parameters were derived for the first stage as a quadratic curve following the equation: E or ln A = K₁ − K₂/M (where K₁ and K₂ are empirical constants whose values are different for the different molecular weight averages, viz. M_n, M_w and M_z and for the different equations).     

Study of geometrical parameters in N-H...N type of hydrogen bonds

Geometrical parameters associated with N-H ... N types of hydrogen bonds have been analysed using crystal structure data on nucleic acids, amino acids and related compounds. Histograms depicting the frequency distribution of N-H ... N length (l) and H-N ... N angle (θ) have been drawn and conclusions on the favoured geometry of such bonds have been arrived at. The distribution ofl shows a pronounced maximum in the range between 2.9? and 3.0? with an overall average of 2.98 ?. The θ distribution shows a pronounced maximum for the hydrogen bond angle in the range 0°-10°, with a rapid fall-off in frequency for nonlinear hydrogen bonds. The frequency shows a cos⁶θ dependence as compared to cos²θ dependence term used earlier to predict the angular dependence of hydrogen bond potential energy in proteins and polypeptides.