基于隧道效应的微机械角速率传感器

提出了一种基于隧道效应的微机械角速率传感器的设计方案,还针对隧穿检测和电容检测进行了比较。并指出基于隧道效应的微机械角速率传感器将极大提高传感器的灵敏度。     

RENEWAL OF BASIC LAWS AND PRINCIPLES FOR POLAR CONTINUUM THEORIES(Ⅸ)—THERMOMECHANICS

The existing fundamental laws of thermodynamics for micropolar continuum field theories are restudied and their incompleteness is pointed out. New first and second fundamental laws for thermostatics and thermodynamics for micropolar continua are postulated. From them all equilibrium equations and the entropy inequality of thermostatics as well as all balance equations and the entropy rate inequalities are naturally and simultaneously deduced. The comparisons between the new results presented here and the corresponding results demonstrated in existing monographs and textbooks concerning micropolar continuum mechanics are made at any time. It should be emphasized to note that, the problem of why the local balance equation of energy and the local entropy inequality could not be obtained from the existing fundamental laws of thermodynamics for micropolar continua, is believed to be clarified.     

船用气水分离器惯性级流场分析及阻力特性研究

采用二阶全展开ETG有限元与大涡模拟（LES）相结合的算法，对120－20－35－3型船用气水分离器惯性级在不同雷诺数条下的流动进行了模拟，通过其中一组雷诺数条件下计算所得该实验件阻力系数与物理实验所得阻力系数相比较，确定出该雷诺数条件下采用大涡模拟时所需的亚格子应力模型常数，将该常数带入其它各组雷诺数条件下的计算中，并将计算结果与相同条件下的物理实验结果相比较，证实了该常数的通用性。该常数一经确定，对各雷诺数条件下的流场进行分析，结果反映出采用二阶全展开ETG有限元与大涡模拟（LES）相结合的算法可以捕捉到非常丰富的涡系及涡动的时变过程。在流场分析的基础上本文计算了该实验件内的能耗场，计算结果表明实验件内的能耗主要集中在大涡丰富的区段内。     

Derivation of the Forchheimer Law Via Matched Asymptotic Expansions

Matched asymptotics are used formally in the linearized Navier–Stokes equations, the so-called Oseen approximation, to derive a nonlinear law for the flow of a single-phase, incompressible Newtonian fluid through a rigid porous medium. A suitable choice of the linear term gives, to order a Forchheimer-type law.     

Creep crack growth on spent fuel zircaloy cladding in interim storage

The effect of creep failure mechanisms on the creep crack growth is examined on spent fuel Zircaloy cladding in interim storage. Based on the creep fracture mechanics parameter C^* and the strain energy density criteria, the relationship between the creep crack growth rate and the fracture mechanics parameter C^* is established theoretically. The effects of initial crack lengths and storage temperature profiles on cladding failure are discussed in detail. The results show that the initial crack length and the storage temperature profile play an important role in the interim dry storage. When the storage temperature remains at a constant temperature of 400 °C, it will be safe for the cladding which stores in the interim dry storage. The results presented in this study provide a reliable cladding integrity evaluation for spent fuel in the interim dry storage.     

Inhomogeneity effects on the crack driving force in elastic and elastic-plastic materials

This article evaluates the effect of material inhomogeneities on the crack-tip driving force in general inhomogeneous bodies and reports results for bimaterial composites. The theoretical model, based on Eshelby material forces, makes no assumptions about the distribution of the inhomogeneities or the constitutive properties of the materials. Inhomogeneities are modeled by making the stored energy have an explicit dependence on the reference coordinates. Then the material inhomogeneity effect on the crack-tip driving force is quantified by the term C_inh, which is the integral of the gradient of the stored energy in the direction of crack growth. The model is demonstrated by two model problems: (i) bimaterial elastic composite using asymptotic solutions and (ii) graded elastic and elastic-plastic compact tension specimen using numerical methods for stress analysis.     

Influence of Solution Volume on the Dissolution Rate of Silicon Dioxide in Hydrofluoric Acid

Experimental data and modeling of the dissolution of various Si/SiO₂ thermal coatings in different volumes of hydrofluoric acid (HF) are reported. The rates of SiO₂‐film dissolution, measured by means of various electrochemical techniques, and alteration in HF activity depend on the thickness of the film coating. Despite the small volumes (0.6–1.2 mL) of the HF solution, an effect of SiO₂‐coating thickness on the dissolution rate was detected. To explain alterations detected in HF activity after SiO₂ dissolution, spectroscopic analyses (NMR and FTIR) of the chemical composition of the solutions were conducted. This is associated with a modification in the chemical composition of the HF solution, which results in either the formation of an oxidized species in solution or the precipitation of dissolution products. HF₂^? accumulation in the HF solution, owing to SiO₂ dissolution was identified as the source of the chemical alteration.     

Dependency of dynamic interlaminar shear strength of composites on test technique used

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic ILS strength was determined based on two experimental techniques, namely torsional split Hopkinson bar (TSHB) apparatus using thin walled tubular specimens and compressive split Hopkinson pressure bar (SHPB) apparatus using single lap specimens. The results obtained from these techniques are compared. In general, it is observed that dynamic ILS strength for composites obtained by TSHB testing using thin walled tubular specimens is lower than the dynamic ILS strength obtained using single lap specimens in compressive SHPB. The issues involved in TSHB testing of thin walled tubular specimens made of composites are discussed and the reasons for reduced dynamic ILS strength using thin walled tubular specimens are highlighted. Finite element analysis (FEA) of thin walled tubular specimens made of composite and resin subjected to quasi-static torsional loading is presented. Using FEA results, the reasons for lower ILS strength of composite thin walled tubular specimens are substantiated.     

Missing value imputation strategies for metabolomics data

The origin of missing values can be caused by different reasons and depending on these origins missing values should be considered differently and dealt with in different ways. In this research, four methods of imputation have been compared with respect to revealing their effects on the normality and variance of data, on statistical significance and on the approximation of a suitable threshold to accept missing data as truly missing. Additionally, the effects of different strategies for controlling familywise error rate or false discovery and how they work with the different strategies for missing value imputation have been evaluated. Missing values were found to affect normality and variance of data and k‐means nearest neighbour imputation was the best method tested for restoring this. Bonferroni correction was the best method for maximizing true positives and minimizing false positives and it was observed that as low as 40% missing data could be truly missing. The range between 40 and 70% missing values was defined as a “gray area” and therefore a strategy has been proposed that provides a balance between the optimal imputation strategy that was k‐means nearest neighbor and the best approximation of positioning real zeros.