膦酰肽和膦酰酯肽的汇聚式合成

本文首先介绍了膦酰肽的分类、结构特征以及膦酰肽的主要合成方法,然后详细介绍了类Mannich反应在合成氨基膦酸衍生物中的应用,并介绍了以类Mannich反应为关键步骤通过汇聚式的方法合成膦酰肽、膦酰酯肽、次膦酰肽、次膦酰酯肽、磺酰膦酰杂交肽的研究进展.汇聚式的合成方法具有原料简单、合成步骤少、原子经济性好等优点.     

应用多接收器电感耦合等离子体质谱法测定海洋碳酸盐中稳定铅同位素组成

研究了多接收器电感耦合等离子体质谱仪(MC-ICP MS)测定铅同位素比值时,影响测试结果准确度和精密度的主要因素及其优化过程。在优化条件下,10 h内连续30次测定4 ng/mL NIST SRM 981同位素标准溶液铅同位素比值,获得208Pb/206Pb、207Pb/206Pb和206Pb/204Pb相对标准偏差(RSDs)分别为0.005%、0.004%和0.054%。长期监测208Pb/206Pb、207Pb/206Pb和206Pb/204Pb,标准偏差(2SDs)分别为0.000 06、0.000 05和0.006 7。采用NEPTUNE MC-ICP MS法测定了低铅海洋碳酸盐样品中稳定铅的同位素比值,并对南海橙黄滨珊瑚(Porites lutea)和库氏砗磲(Tridacna gigas)进行了分析,得到全流程空白为8～10 pg,重复样误差优于0.1%。经0.50 mol/L HNO3洗脱之后,得到海南珊瑚样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.086 2±0.001 5、0.849 90±0.001 47(n=16);海南砗磲样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.116 9±0.004 2、0.864 81±0.001 62(n=9)。进一步考察了南海海洋碳酸盐中204Pb的同位素比值。分析结果表明,南海海洋碳酸盐中稳定铅同位素比值与中国气溶胶、珠江三角洲大气沉降、黄土及南海海底玄武岩等具有很好的相关性。方法适用于复杂基体高钙低铅的海洋碳酸盐样品中铅同位素比值的分析。     

Ultra high performance liquid chromatography-quadrupole-time of flight analysis for the identification and the determination of resveratrol and its metabolites in mouse plasma

Resveratrol is a polyphenol that has numerous interesting biological properties, but, per os, it is quickly metabolized. Some of its metabolites are more concentrated than resveratrol, may have greater biological activities, and may act as a kind of store for resveratrol. Thus, to understand the biological impact of resveratrol on a physiological system, it is crucial to simultaneously analyze resveratrol and its metabolites in plasma. This study presents an analytical method based on UHPLC-Q-TOF mass spectrometry for the quantification of resveratrol and of its most common hydrophilic metabolites. The use of ¹³C- and D-labeled standards specific to each molecule led to a linear calibration curve on a larger concentration range than described previously. The use of high resolution mass spectrometry in the full scan mode enabled simultaneous identification and quantification of some hydrophilic metabolites not previously described in mice. In addition, UHPLC separation, allowing run times lower than 10 min, can be used in studies that requiring analysis of many samples.     

Surfactant-Free Multiple Pickering Emulsions Stabilized by Combining Hydrophobic and Hydrophilic Nanoparticles

A series of W/O/W or O/W/O emulsion stabilized solely by two different types of solid nanoparticles were prepared by a two-step method. We explored the option of particular emulsifiers for the multiple Pickering emulsions, and a variety of nanoparticles (silica, iron oxide, and clay) only differing in their wettability was used. The primary W/O emulsion was obtained by the hydrophobic nanoparticles, and then the hydrophilic nanoparticles were used as emulsifier in the secondary emulsification to prepare the W/O/W emulsion. In a similar way, the primary O/W emulsion of the O/W/O emulsion was stabilized by the hydrophilic nanoparticles, while the secondary emulsification to prepare the O/W/O emulsion was effected with the hydrophobic nanoparticles. The resultant multiple Pickering emulsion was stable to coalescence for more than 3 months, except the W/O/W emulsions of which the secondary emulsion stabilized by clay nanoparticles became a simple O/W emulsion in a day after preparation. Moreover, the temperature and pH sensitive poly(N-isopropylacrylamide-co-methacrylic acid) (P(NIPAm-co-MAA)) microgels were introduced as an emulsifier for the secondary emulsification to obtain the stimulus-responsive multiple W/O/W emulsion. Such microgel-stabilized multiple emulsions could realize the efficient controlled release of water-soluble dye, Rhodamine B (RB) on demand in a multiple-emulsion delivery system.      

Janus Emulsion Drops: Equilibrium Calculations

Experimental results indicated the contact angles in the drops of Janus emulsions formed in a one-step mixing process to be invariant within a significant range the oil volume ratios, similar to the results from microfluidics emulsification. Since this result points to a connection between the kinetically formed emulsions and the local equilibrium topology of emulsion drops, the effect of interfacial tensions on the morphology of Janus emulsions was estimated from the equilibrium interfacial tensions at the line of contact. Realistic values of the tensions revealed the limited range of these to obtain Janus drops and also offered correlation between the equilibrium entities and the curvature of the interface between the two oils.     

Formula Optimization of Emulsifiers for Preparation of Multiple Emulsions Based on Artificial Neural Networks

Formulation optimization of emulsifiers for preparing multiple emulsions was performed in respect of stability by using artificial neural network (ANN) technique. Stability of multiple emulsions was expressed by the percentage of reserved emulsion volume of freshly prepared sample after centrifugation. Individual properties of multiple emulsions such as droplet size, δ, viscosity of the primary and the multiple emulsions were also considered. A back‐propagation (BP) network was well trained with experimental data pairs and then used as an interpolating function to estimate the stability of emulsions of different formulations. It is found that using mixtures of Span 80 and Tween 80 with different mass ratio as both lipophilic and hydrophilic emulsifiers, multiple W/O/W emulsions can be prepared and the stability is sensitive to the mixed HLB numbers and concentration of the emulsifiers. By feeding ANN with 39 pairs of experimental data, the ANN is well trained and can predict the influences of several formulation variables to the immediate emulsions stability. The validation examination indicated that the immediate stability of the emulsions predicted by the ANN is in good agreement with measured values. ANN therefore could be a powerful tool for rapid screening emulsifier formulation. However, the long‐term stability of the emulsions is not good, possibly due to the variation of the HLB number of the mixed monolayers by diffusion of emulsifier molecules, but can be greatly improved by using a polymer surfactant Arlacel P135 to replace the lipophilic emulsifier.     

Photodegradation of Caffeic Acid in W/O/W Emulsions in the Absence and in the Presence of TiO2

Caffeic acid, a natural phenol with antioxidant and sunscreen activity, can undergo photooxidation upon UV irradiation. The photodegradation of caffeic acid at different concentrations was assessed in water, at pH 4.0 and 6.0, without and with TiO₂. The study was then carried out on W/O/W emulsions entrapping the phenolic acid either in the inner or in the outer aqueous phase in the absence and in the presence of TiO₂, added in the external phase (pH 6.0 or 7.0). The degradation of caffeic acid followed a pseudo-zero order kinetic with an inverse dependence from its initial concentration; at increasing pH of the medium caffeic acid degraded faster. The addition of TiO₂ increased the initial photodegradation rate. Compared with water, W/O/W emulsions protected the phenol towards both the photodegradation and the photocatalytic activity of TiO₂. Multiple systems allowed to incorporate caffeic acid and TiO₂ in the same formulation avoiding any catalytic interactions.     

The Ligand‐Based Quintuple Bond‐Shortening Concept and Some of Its Limitations

Herein, the ligand‐based concept of shortening quintuple bonds and some of its limitations are reported. In dichromium–diguanidinato complexes, the length of the quintuple bond can be influenced by the substituent at the central carbon atom of the used ligand. The guanidinato ligand with a 2,6‐dimethylpiperidine backbone was found to be the optimal ligand. The reduction of its chromium(II) chloride–ate complex gave a quintuply bonded bimetallic complex with a Cr? Cr distance of 1.7056 (12) Å. Its metal–metal distance, the shortest observed in any stable compound yet, is of essentially the same length as that of the longest alkane C? C bond (1.704 (4) Å). Both molecules, the alkane and the Cr complex, are of remarkable stability. Furthermore, an unsupported Cr^I dimer with an effective bond order (EBO) of 1.25 between the two metal atoms, indicated by CASSCF/CASPT2 calculations, was isolated as a by‐product. The formation of this by‐product indicates that with a certain bulk of the guanidinato ligand, other coordination isomers become relevant. Over‐reduction takes place, and a chromium–arene sandwich complex structurally related to the classic dibenzene chromium complex was observed, even when bulkier substituents are introduced at the central carbon atom of the used guanidinato ligand.     

Integrated Hollow Mesoporous Silica Nanoparticles for Target Drug/siRNA Co‐Delivery

A hollow mesoporous silica nanoparticle (HMSNP) based drug/siRNA co‐delivery system was designed and fabricated, aiming at overcoming multidrug resistance (MDR) in cancer cells for targeted cancer therapy. The as‐prepared HMSNPs have perpendicular nanochannels connecting to the internal hollow cores, thereby facilitating drug loading and release. The extra volume of the hollow core enhances the drug loading capacity by two folds as compared with conventional mesoporous silica nanoparticles (MSNPs). Folic acid conjugated polyethyleneimine (PEI‐FA) was coated on the HMSNP surfaces under neutral conditions through electrostatic interactions between the partially charged amino groups of PEI‐FA and the phosphate groups on the HMSNP surfaces, blocking the mesopores and preventing the loaded drugs from leakage. Folic acid acts as the targeting ligand that enables the co‐delivery system to selectively bind with and enter into the target cancer cells. PEI‐FA‐coated HMSNPs show enhanced siRNA binding capability on account of electrostatic interactions between the amino groups of PEI‐FA and siRNA, as compared with that of MSNPs. The electrostatic interactions provide the feasibility of pH‐controlled release. In vitro pH‐responsive drug/siRNA co‐delivery experiments were conducted on HeLa cell lines with high folic acid receptor expression and MCF‐7 cell lines with low folic acid receptor expression for comparison, showing effective target delivery to the HeLa cells through folic acid receptor meditated cellular endocytosis. The pH‐responsive intracellular drug/siRNA release greatly minimizes the prerelease and possible side effects of the delivery system. By simultaneously delivering both doxorubicin (Dox) and siRNA against the Bcl‐2 protein into the HeLa cells, the expression of the anti‐apoptotic protein Bcl‐2 was successfully suppressed, leading to an enhanced therapeutic efficacy. Thus, the present multifunctional nanoparticles show promising potentials for controlled and targeted drug and gene co‐delivery in cancer treatment.