气液色谱法研究一些五员杂环和Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2加合反应的热力学性质

用气液色谱法研究过一系列作为Lewis碱(B)的有机配体和作为Lewis酸(A)的配合物之间的加合作用.研究较多的碱已有脂肪醇、醚、酮、醛、脂及胶等.对生物体系中广为存在的杂环配体碱的工作还很少.本文着重研究噻吩,呋喃和吡咯这类小分子杂环配体和Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2(以下简称A)配合物的加合反应. Ni[CF_3COCHC(C_4H_4S)=NCH_2]_2的合成参考文献.固定液角鲨烷系英国进口,     

制备参数对Au／Fe2O3催化剂水煤气变换性能的影响

 采用共沉淀法制备了Au／Fe2O3催化剂，并系统地考察了制备参数对其催化WGS性能的影响．通过BET，XRD，XRF，H2－TPR和HRTEM等表征手段，初步考察了Au／Fe2O3催化剂具有高催化活性的原因．结果表明，金负载量、沉淀剂种类、沉淀方式、沉淀pH值、焙烧气氛和焙烧温度对Au／Fe2O3催化剂的催化性能均具有较大的影响．Au／Fe2O3催化剂的低温高活性是纳米Au与Fe3O4协同作用的结果；Au／Fe2O3催化剂的高温活性是由于活性相Fe3O4起主要作用的结果．纳米Au粒子的烧结会降低其催化活性．     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

XPS and XAES analysis of copper,arsenic and sulfur chemical state in enargites

Enargite, a copper arsenic sulfide with the formula Cu₃AsS₄ is of environmental concern due to its potential to release toxic arsenic species. The oxidation and dissolution of enargite are governed by the composition and chemical state of the outermost surface layer. Qualitative and quantitative analysis of the enargite surface can be initially obtained on the basis of X‐ray photoelectron spectroscopy (XPS) binding energy and intensity data. However, a more precise determination of the chemical state of the principal elements of enargite (copper, arsenic and sulfur) in the altered surface layer and in the bulk of the mineral requires a combined analysis based on XPS photoelectron lines and the corresponding X‐ray excited Auger lines. On the basis of results obtained on natural and synthetic enargite samples and on standards of sulfides and oxides, the Auger parameter α′ of different compounds was calculated and the Wagner chemical state plots were drawn for arsenic, copper and sulfur. Arsenic in enargite is found to be in a chemical environment similar to that of arsenides or elemental arsenic, whereas copper in enargite is in a chemical state that corresponds to copper sulfide, Cu₂S, for all samples irrespective of surface treatment (natural or freshly cleaved). Only sulfur changed from a chemical state similar to that of copper or iron sulfide in freshly cleaved samples to another state in natural enargite in the as‐received state. Thus, it is the sulfur atom at the surface of enargite that is most susceptible to changes in the enargite surface state and composition. A more detailed interpretation of this behavior, based on differences in the initial and final state effects, is proposed here. The concept of Auger parameter and chemical state plot, used here for the first time for investigating enargite, has proved to be a method to unambiguously assign the chemical state of the principal elements copper, arsenic and sulfur in these minerals. Copyright © 2006 John Wiley & Sons, Ltd.     

On the ternary B 2-phase in the Al-Co-Ga system

Summary Lattice parameter values were determined for the ternary B 2-phase in the Al-Co-Ga system, and it was found that a continuous solid solution exists between -AlCo and -CoGa. Phase boundaries of the ternary phase at 1 100 K were derived from the variation of the lattice parameter with composition.

---

Über die ternäre B 2-Phase im System Al-Co-Ga

Zusammenfassung Im Bereich der ternären B 2-Phase im System Al-Co-Ga wurden die Werte des Gitterparameters bestimmt; es stellte sich heraus, daß eine durchgehende feste Lösung zwischen -AlCo und -CoGa besteht. Die Phasengrenzen der ternären Phase bei 1 100 K wurden aus der Änderung des Gitterparameters mit der Zusammensetzung abgeleitet.

     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

Adaptive approach for nonlinear sensitivity analysis of reaction kinetics

We present a unified approach for linear and nonlinear sensitivity analysis for models of reaction kinetics that are stated in terms of systems of ordinary differential equations (ODEs). The approach is based on the reformulation of the ODE problem as a density transport problem described by a Fokker-Planck equation. The resulting multidimensional partial differential equation is herein solved by extending the TRAIL algorithm originally introduced by Horenko and Weiser in the context of molecular dynamics (J. Comp. Chem. 2003, 24, 1921) and discussed it in comparison with Monte Carlo techniques. The extended TRAIL approach is fully adaptive and easily allows to study the influence of nonlinear dynamical effects. We illustrate the scheme in application to an enzyme-substrate model problem for sensitivity analysis w.r.t. to initial concentrations and parameter values.     

多柱色谱技术进展

在色谱分析过程中，利用串联、并联或串并联结合的方式将多根色谱柱组合起来，可以实现高通量和高分辨的分离效果。相比于传统单柱色谱技术，多柱技术很好地满足了批量样品分析和复杂生物样品分离分析的需求，因此引起了广泛关注。该文对多柱技术在多维分离、芯片色谱、毛细管电泳、固定相筛选以及串联色谱等领域的应用进行了综述，并对其发展前景进行了展望。     

Are measured values of the Auger parameter always independent of charging effects?

In x‐ray photoelectron spectroscopy (XPS) the Auger parameter is often used to study the electronic properties of elements, particularly in insulator materials, because this parameter is assumed to be independent of charging effects. In this paper we report on subtle differences in sample structure and experimental conditions for which the sample potential may not remain constant during the measurements for some spectrometers or experimental arrangements; for such conditions the Auger parameter is not independent of charging. We compare a series of measurements with insulating plate substrates of Al₂O₃ on which different amounts of SnO₂ and Au were deposited. X‐ray photoelectron spectra were collected for different conditions of the sample that was placed either grounded or left floating on a metallic sample holder during measurement. It is found that the Auger parameter is independent of the experimental conditions for Au but substantial differences were found for deposited SnO₂. Surprisingly, measurement artifacts due to charging appeared in the Auger parameter for Sn when the sample holder was grounded but not when it was left floating. In the grounded samples differences up to 0.6 eV in the Auger parameter for Sn were found with respect to the actual value of this parameter measured with substrates where charging effects were not significant. Because no differences in peak broadening have been observed under different measurement conditions, it has been assumed that the shift was not caused by a conventional differential charging phenomenon. Considering the different response of the substrate and the deposited layer on stabilizing the charge when the sample is grounded, we have worked out a possible explanation to account for the observed artifacts. Instrumental specifications should be optimized very carefully, especially if (as here) relatively high charging shifts point to a non‐optimum self‐biasing of the surface potential at the insulating samples. Copyright © 2003 John Wiley & Sons, Ltd.