e-A深度非弹性散射中胶子辐射振幅的新计算方法

在e-A深度非弹性散射过程中, 喷注穿过冷核介质时, 多重散射诱导胶子辐射会导致对碎裂函数的修正及喷注的能量损失.前期研究中关于计算e-A深度非弹性散射中胶子辐射振幅的两种方法: 螺旋振幅近似和微扰QCD严格计算都异常繁杂. 本文发展了一种新的方法, 可以方便计算出多重散射导致胶子辐射的振幅, 得到的碎裂函数的修正以及能量损失与严格计算的结果一致.     

A NUMERICALLY STABLE BLOCK MODIFIED GRAM-SCHMIDT ALGORITHM FOR SOLVING STIFF WEIGHTED LEAST SQUARES PROBLEMS

Recently, Wei in proved that perturbed stiff weighted pseudoinverses and stiff weighted least squares problems are stable, if and only if the original and perturbed coefficient matrices A and A^- satisfy several row rank preservation conditions. According to these conditions, in this paper we show that in general, ordinary modified Gram-Schmidt with column pivoting is not numerically stable for solving the stiff weighted least squares problem. We then propose a row block modified Gram-Schmidt algorithm with column pivoting, and show that with appropriately chosen tolerance, this algorithm can correctly determine the numerical ranks of these row partitioned sub-matrices, and the computed QR factor R^- contains small roundoff error which is row stable. Several numerical experiments are also provided to compare the results of the ordinary Modified Gram-Schmidt algorithm with column pivoting and the row block Modified Gram-Schmidt algorithm with column pivoting.     

Mutual solubilities of hydrocarbons and water with the CPA EoS

The knowledge of hydrocarbon/water phase equilibria is important in the design and operation of equipment for petroleum transport and refining and petrochemical plants. The presence of water in a hydrocarbon mixture can affect the product quality and damage the operation equipment due to corrosion and formation of gas hydrates. Tracing the concentration of hydrocarbons in aqueous media is also important for technical purposes like preventing oil spills and for ecological concerns such as predicting the fate of these organic pollutants in the environment.     

The strong relaxation limit of the multidimensional isothermal Euler equations

We construct global smooth solutions to the multidimensional isothermal Euler equations with a strong relaxation. When the relaxation time tends to zero, we show that the density converges towards the solution to the heat equation.

     

Control of the block copolymer morphology in templated epoxy thermosets

It has been found that by the addition of low concentrations of an amphiphilic block copolymer to an epoxy resin, novel disordered morphologies can be formed and preserved through curing. This article will focus on characterizing the influence of the block copolymer and casting solvent on the templated morphology achieved in the thermoset sample. The ultimate goal of this work is to determine the parameters that would control the microphase morphology produced. Epoxy resins blended with a series of amphiphilic block copolymers based on hydrogenated polyisoprene (polyethylene-alt-propylene or PEP) and polyethylene oxide (PEO), specifically, were investigated. In this article, the cure-induced order–order phase transition from the spherical to wormlike micelle morphology will also be discussed. It is proposed that the formation of the wormlike micelle structure from the spherical micelle structure is similar to the phase transition behavior that occurs in dilute block copolymer solutions as a function of the influence of the solvent on micelle morphology. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3338–3348, 2007     

Synthesis,dynamic light scattering,and luminescence properties of copolymers containing iridium(III) bisterpyridine in the side chain

Supramolecular block‐random copolymers containing [Ir(terpy)₂]³⁺ in the side chain were synthesized via postfunctionalization of a P(S‐b‐AC_terpy) block copolymer. Absorbance and emission spectra compared to a model compound show that the polymer backbone has a minor effect on the polymer absorbance but produces a larger shift for the phosphorescence signals to higher wavelength. Dynamic light scattering of the metal complex containing copolymer studied in various solvents showed monomodal aggregation with decreasing aggregate size as the solvent dielectric constant increased. The copolymer precursor P(S‐b‐AC_terpy) shows multimodal aggregation in different solvents with the major population consisting of single chains. This difference in behavior between the two polymers is attributed to the electrolytic nature of the complex and the amphiphilicity induced by the charged metal complex. Supramolecular copolymers like these will continue to have interesting self‐organizational properties and may find applications in multicomponent systems for photoinduced charge separation processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1109–1121, 2007     

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

Reorientational relaxation and rotational–translational coupling in water clusters in a d.c. external electric field

Molecular dynamics simulations have been carried out for small water clusters (N=16, 32, 64) in a d.c. electric field at T=200 K. It was shown that for relatively weak fields, there was a significant decrease of reorientational and structural relaxation times for all cluster sizes examined. Regarding the molecular reorientational motions, in the strong field regime, a decoupling of tumbling and spinning librations was observed. Reorientational relaxation times of the dipole and vector joining the two hydrogen atoms were found to follow different relaxation laws, with the former decreasing and the latter increasing with electric field increase. These trends were qualitatively explained by invoking the Debye model with field-dependent friction for dipole librations and the symmetric double-well for spinning rotations on a plane perpendicular to the field axis. Finally, the interdependence of the reorientation on the translational modes of the cluster was indicated, with the translationally slow molecules being rotationally slow as well and vice versa.     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007