Where the rubber meets the hand: Unlocking the sensing potential of dielectric elastomers

Practice makes perfect to some extent. Research has shown that musicians who practice the piano for long periods of time can suffer a range of hand problems from loss of control to diminished speed. Now imagine a rubber keyboard that is springy, soft, and elastic. This is the new type of input device that dielectric elastomers (DE) can create. However their usage in large sensing systems is limited by a scalability challenge. Each DE sensor is married to a pair of connection cables and electronics, adding to the complexity of the background overheads. A new efficient multi‐frequency method is presented that is capable of detecting internal pressure changes from a difference in the DE's capacitance without the need for any additional wires or connections. This effectively segments the DE into smaller sections, achieving information from a single sensor equivalent to multiple sensors. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 465–472     

Dynamic response of a growing inclusion in a discrete system

The propagation of a semi-infinite line defect, contained in an infinite square-cell lattice is considered. The defect is composed of particles lighter than those in the ambient lattice and it is assumed this defect propagates with constant speed. Dispersion properties of the lattice are related to waves generated by the propagating defect. In order to determine these properties, the Wiener–Hopf technique is applied. Additional features, related to localisation along the defect are also identified. Analysis of the dispersion relations for this lattice, from the kernel function inside the Wiener–Hopf equation, is carried out. The solution of the Wiener–Hopf equation is presented for the case when an external load is applied corresponding to an energy flux at infinity.     

NMR line‐fitting quantification of polysaccharide N‐acylurea‐based modification in glycoconjugates of Salmonella Typhi Vi polysaccharide

The polysaccharides modification via carbodiimide reaction is one of the most applied methods for obtaining conjugated vaccines against Salmonella enterica. However, N‐acylurea carbodiimide adduct generated in the process is a critical impurity in carbohydrate‐based vaccines. A quantitative NMR method was developed for assessing the N‐acylurea carbodiimide adduct impurity. The procedure was based on line‐fitting facilities for processing the NMR signals on complex spectra. The method showed good linearity, accuracy and precision under inter‐operator variation (relative standard deviation <5%). Copyright © 2017 John Wiley & Sons, Ltd.     

THE STUDY OF 2-CHLORO-5,5-DIMETHYL-2-OXO-1,3,2-DIOXAPHOSPHORINANE IN SOLUTIONS BY MOLECULAR DYNAMICS METHODS USING IR AND RAMAN SPECTROSCOPY

Abstract

2-Chloro-5,5-dimethyl-2-oxo-1,3,2-dioxaphosphorinane has been studied in CCl₄, CHCl₃ and CD₃CN solutions by IR and Raman line shape analysis. Equilibrium process of dimerization and ring conversion in CCl₄ solutions have been considered. On the contrary to the commonly expected dominance of the conformer with the equatorial oriented P[dbnd]O bond for 2-halo-2-oxo-1,3,2-dioxaphosphorinanes, it was found that for the 2-chloro derivative both conformers are nearly equally distributed. It has been shown that the interactions induced absorption is an important mechanism of relaxation in the studied compound and this mechanism gives significant contribution to the total IR band broadening, while the interaction induced light scattering is negligible. The obtained results show that the molecular dynamics method can be useful in studying cyclic compounds in solutions.     

Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

An on‐line sample pretreatment technique for the HPLC analysis of plant samples

A continuous‐flow, on‐line sample pretreatment technique using a silica gel microsyringe extractor has been developed. All steps including extraction, separation, clean‐up, and concentration occur in the microsyringe. The overall sample pretreatment process takes <10 min per sample. Different polarity chemicals in the plant sample are successively extracted and separated, and analyzed in parallel using HPLC–UV and HPLC–UV–MS/MS. Polycyclic aromatic hydrocarbons, alkylphenols, and plant hormones were determined as model compounds for nonpolar, intermediate polarity, and polar fractions, respectively. All the parameters that influence the extraction and separation efficiency of the microsyringe extractor have been optimized and evaluated. Under the optimized conditions, recoveries of target compounds ranged from 78.4 to 101.9%, the RSD was <12.8% and the square of the correlation coefficient was >0.99. Complex plant samples of Sambucus Mandshurica Kitag have been tested using this method. Fluorene, phenanthrene, pyrene, and plant hormones were detected in all the samples, and concentrations ranged from 24.2–34.9, 43.8–67.1, 25.9–29.2, and 14.5～110.8 ng/g, respectively.     

The number of spanning trees in an (r,s)‐semiregular graph and its line graph

For a graph G, a “spanning tree” in G is a tree that has the same vertex set as G. The number of spanning trees in a graph (network) G, denoted by t(G), is an important invariant of the graph (network) with lots of decisive applications in many disciplines. In the article by Sato (Discrete Math. 2007, 307, 237), the number of spanning trees in an (r, s)‐semiregular graph and its line graph are obtained. In this article, we give short proofs for the formulas without using zeta functions. Furthermore, by applying the formula that enumerates the number of spanning trees in the line graph of an (r, s)‐semiregular graph, we give a new proof of Cayley's Theorem. © 2013 Wiley Periodicals, Inc.     

Determination of UV filters in river water samples by in‐line SPE‐CE‐MS

The use of SPE coupled in‐line to CE using electrospray MS detection (in‐line SPE‐CE‐ESI‐MS) was investigated for the preconcentration and separation of four UV filters: benzophenone‐3, 2,2‐dihydroxy‐4‐methoxybenzophenone, 2,4‐dihydroxybenzophenone and 2‐phenylbenzimidazole‐5‐sulphonic acid. First, a CE‐ESI‐MS method was developed and validated using standard samples, obtaining LODs between 0.06 μg/mL and 0.40 μg/mL. For the in‐line SPE‐CE‐ESI‐MS method, three different sorbents were evaluated and compared: Oasis HLB, Oasis MCX, and Oasis MAX. For each sorbent, the main parameters affecting the preconcentration performance, such as sample pH, volume, and composition of the elution plug, and sample injection time were studied. The Oasis MCX sorbent showed the best performance and was used to validate the in‐line SPE‐CE‐ESI‐MS methodology. The LODs reached for standard samples were in the range between 0.01 and 0.05 ng/mL with good reproducibility and the developed strategy provided sensitivity enhancement factors between 3400‐fold and 34 000‐fold. The applicability of the developed methodology was demonstrated by the analysis of UV filters in river water samples.     

Continuous Spectroscopy Characterization of Emulsions

In emulsion polymerization, the formation of particles has an important effect on the rate of reaction and on the final properties of the latex. To investigate particle nucleation mechanisms in emulsion polymerization it is necessary to establish the initial conditions of the emulsified system before the reaction takes place. This research reports on a technique to continuously monitor the droplet size distribution of liquid-liquid emulsions using spectroscopy. The on-line particle characterization methodology is based on an integrated sampling and dilution strategy combined with spectroscopy methods. It is shown that the sampling system integrated with a multiwavelength turbidity detector provides reliable estimates of droplet populations as function of the dispersed phase concentration in emulsions of saturated hydrocarbons. The results provide not only the groundwork necessary for the elucidation of particle nucleation during emulsion polymerization process but also suggests the potential of this combined technology to further our understanding of liquid-liquid emulsions.