环氧树脂／酚酞聚醚醚砜共混物的相行为

酚酞聚醚醚砜(PES-c)同未交联的双酚A二缩水甘油醚(DGEBA)环氧树脂的共混物呈单一的玻璃化转变温度,其相容性主要归因于混合熵的贡献。PES-C同交联的环氧树脂之间的相容性与所用的固化剂有关。以胺类作DGEBA的固化剂时,共混物不发生相分离;以酸酐作固化剂时,共混物发生相分离。     

Interaction parameters of crystalline/crystalline polypropylene/poly(butene‐1) blends: Effect of molecular fractionation

Compatibility of crystalline/crystalline polypropylene (PP)/poly(butene‐1) (PB‐1) blends was investigated via the method of equilibrium melting temperature depression followed by determining the polymer–polymer interaction parameter (χ) using the Nishi–Wang equation. The composition variation of the equilibrium melting temperatures of blends (T) was determined with the Hoffman–Weeks plot. The T and its variation with the blend composition depended on the crystallization temperature range. The morphological effect of the blend composition was not a contribution factor for the T depressions of PP and PB‐1 in the blends. The interplay of the dilution effect and molecular fractionation effect of the amorphous component on crystallization of the crystalline component in the blends governed the relation of T with the blend composition. The calculated χ values were negative depending on the blend composition. The negative χ values suggested that PP and PB‐1 in the amorphous region were compatible. The composition variation of the χ values was attributed to the molecular fractionation effect during crystallization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 638–648, 2002; DOI 10.1002/polb.10125     

聚砜/聚醚砜相容性对合金膜结构和性能的影响

通过混合焓法预测并用相差显微镜表征了PSF/PES合金体系的相容性,表明二者为相容性比较差的部分相容体系.合金膜中聚合物的组成影响PSF/PES间的相容性,进而影响合金膜的结构和性能.随合金体系相容性下降,膜的平均孔径显著增加,水通量增大而相应的截留率下降;研究表明,改变PSF/PES间的相容性是调节膜结构、提高膜性能的有效方法.     

具有血液相容性的嵌段聚酯-聚醚接枝共聚物的合成

本文研究了嵌段聚酯-聚醚膜经紫外光活化后,于水溶液中铈盐引发亲水性单体丙烯酰胺在其表面上接枝共聚合反应。同时对接枝物进行了证实和表征。并通过活体动物血液灌流实验表明,此接枝共聚物具有良好的血液相容性。     

Stabilized liposomes with phospholipid polymers and their interactions with blood cells

To stabilize a phospholipid liposome, addition of various water-soluble polymers into a liposomal aqueous suspension was investigated. The water-soluble polymers were poly(ethylene oxide) (PEO), poly(N-vinyl pyrrolidone) (PVPy) and poly[2-methacryloyloxyethyl phosphorylcholine(MPC)], and poly[MPC-co-n-butyl methacrylate(BMA)]. The gel–liquid crystal transition temperature (T_c) of the diparmitoylphosphatidylcholine (DPPC) liposome was not changed by addition of these polymers significantly. However, membrane fluidity of DPPC liposome treated with water-soluble polymers, which was measured with fluorescence probe, depended on the chemical structure of the water-soluble polymers. In the case of PEO and PVPy, the temperature dependence of membrane fluidity was the same as that of the original DPPC liposome, on the other hand, poly(MPC) and poly(MPC-co-BMA) induced a rise in the temperature where an increase in the membrane fluidity was observed. The release of carboxy fluorescein from the DPPC liposome was suppressed by the addition of the MPC polymers. The liposomes in the MPC polymer solution were stable compared with those in water when plasma was added into the suspension. Interactions with stabilized liposome with blood cells such as platelets and erythrocytes were evaluated. Activation of platelets in contact with liposome covered with poly(MPC) or poly(MPC-co-BMA) was less than PEO-stabilized liposome. On the other hand, no hemolysis of erythrocytes was observed when every polymer-treated liposome was added in the suspension of erythrocytes. Based on these results, the MPC polymers could interact with the liposome surface, adsorb on the liposomes and stabilize them, and had no adverse effect to the blood cells even when they were in a physiological environment.     

Thermal analysis of thermoplastic elastomers based on recycled polyethylenes and ground tyre rubber

Thermal stability and phase structure of thermoplastic elastomers (TPEs) based on post-consumer materials such as recycled lowor high-density polyethylene and ground tyre rubber (GTR) were investigated by using TG, DSC and DMTA analysis. Preliminary reclamation of GTR leads to enhancement of compatibility between polyethylene matrix and dispersed GTR particles.     

线性低密度聚乙烯／乙烯醋酸乙烯共聚物共混体系的相容性及性能

线性低密度聚乙烯／乙烯醋酸乙烯共聚物共混体系的相容性及性能杨毓华＊白春霞花荣于李三喜（中国科学院长春应用化学研究所长春１３００２２）（沈阳化工学院高分子科学与工程系沈阳）关键词线性低密度聚乙烯，乙烯醋酸乙烯共聚物，共混，相容性，ＤＳＣ，ＷＡＸＤ，力...     

Water‐resistant conducting hybrids from electrostatic interactions

Conductive hybrids were prepared in a water/ethanol solution via the sol–gel process from an inorganic sol containing carboxyl groups and water‐borne conductive polyaniline (cPANI). The inorganic sol was prepared by the hydrolysis and condensation of methyltriethoxysilane with the condensed product of maleic anhydride and aminopropyltriethoxysilane as a catalyst, for which the carboxyl counterion along the cPANI backbone acted as an electrostatic‐interaction moiety. The existence of this electrostatic interaction could improve the compatibility of the two components and contribute to the homogeneous dispersion of cPANI in the silica phase. The electrostatic‐interaction hybrids displayed a conductivity percolation threshold as low as 1.1 wt % polyaniline in an emeraldine base, showing 2 orders of magnitude higher electrical conductivity than that without electrostatic interactions. The electrostatic‐interaction hybrids also showed good water resistance; the electrical conductivity with a cPANI loading of 16 wt % underwent a slight change after 14 days of soaking in water. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1424–1431, 2007     

Application of DSC and NIRS to study the compatibility of metronidazole with different pharmaceutical excipients

The purpose of the present work was to study the compatibility of metronidazole with different pharmaceutical excipients (hydroxypropyl methylcellulose, poly(ethylene oxide), microcrystalline cellulose, dicalcium phosphate dihydrate, and anhydrous dicalcium phosphate) using differential scanning calorimetry and diffuse reflectance spectroscopy. Dicalcium phosphate dihydrate was the only excipient that showed interaction with metronidazole even before storage. Changes referring to a possible transition to dihydrate form were observed in the thermal curves of anhydrous dicalcium phosphate after four weeks of storage. Although dicalcium phosphate dihydrate can be replaced by the anhydrous form in pharmaceutical formulations, the observed transition might negatively influence the stability of dosage forms.     

Polycaprolactone/polystyrene bioblends characterized by thermogravimetry, modulated differential scanning calorimetry and infrared photoacoustic spectroscopy

Polymer blends comprising at least one biodegradable polymer with other polymers are referred to as bioblends. Successful development of bioblends requires the biodegradable polymers to be compatible with other polymer components. Compatibility is normally assessed through the evaluation of the degree of intermolecular interactions between individual components. In this work, the degree of interaction in binary bioblends comprising biodegradable polycaprolactone (PCL) and polystyrene (PS) was investigated using thermogravimetric analysis (TGA), modulated differential scanning calorimetry (MDSC) and Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). The TGA studies indicated that incorporation of PCL in PS results in thermal destabilization of PCL/PS bioblends. The MDSC studies showed that some parameters, such as the enthalpies of melting and crystallization, favored partial miscibility of PS in PCL, while others, such as change in the glass transition temperature, favored immiscibility. The FTIR-PAS spectra suggested the presence of intermolecular n-π interactions between PCL and PS and supported the results of TGA and MDSC analyses of PCL/PS bioblends.