Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.     

Issue Information ‐ TOC

Numerical modeling of multiphase flow generally requires a special procedure at the solid wall in order to be consistent with Young's law for static contact angles. The standard approach in the lattice Boltzmann method, which consists of imposing fictive densities at the solid lattice sites, is shown to be deficient for this task. Indeed, fictive mass transfer along the boundary could happen and potentially spoil the numerical results. In particular, when the contact angle is less than 90 degrees, the deficiencies of the standard model are major. Various videos that demonstrate this behavior are provided (Supporting Information). A new approach is proposed and consists of directly imposing the contact angle at the boundaries in much the same way as Dirichlet boundary conditions are generally imposed. The proposed method is able to retrieve analytical solutions for static contact angles in the case of straight and curved boundaries even when variable density and viscosity ratios between the phases are considered. Although the proposed wetting boundary condition is shown to significantly improve the numerical results for one particular class of lattice Boltzmann model, it is believed that other lattice Boltzmann multiphase schemes could also benefit from the underlying ideas of the proposed method. The proposed algorithm is two‐dimensional, and the D2Q9 lattice is used. Copyright © 2016 John Wiley & Sons, Ltd.     

On the molecular mechanism of the crystal transformation (tetragonal-hexagonal) in polybutene-1

The phase transformation from the tetragonal to the hexagonal crystal modification in highly oriented lamellae of poly-butene-1 has been followed by transmission electron microscopy (TEM). It is found that the reaction-controlling step is the nucleation process. No lattice orientation relationship (besides the [001]-direction, which is parallel in both crystal modifications) exists between non-transformed and transformed crystals. The nucleation is strongly enhanced by thermal or external stresses. Crystal growth, nucleated by external stresses, was observed at temperatures as low as — 150°C. The molecular mechanisms of the transformation are discussed.     

Predicting Low-Pressure O2 Adsorption in Nanoporous Framework Materials for Sensing Applications

A set of 98 nanoporous framework material (NFM) structures was investigated by classical Grand canonical Monte Carlo simulations for low-pressure O₂ adsorption properties (Henry’s constant and isosteric heat of adsorption). The set of materials includes those that have shown high O₂ uptake experimentally as well as a subset of more than 2000 structures previously screened for noble-gas uptake. While use of the general force field UFF is fruitful for noble-gas adsorption studies, its use is shown to be limited for the case of O₂ adsorption—one distinct limitation is a lack of sufficient O₂–metal interactions to be able to describe O₂ interaction with open metal sites. Nonetheless, those structures without open metal sites that have very small pores (<2.5 Å) show increased O₂/N₂ selectivity. Additionally, O₂/N₂ mixture simulations show that in some cases, H₂O or N₂ can hinder O₂ uptake for NFMs with small pores due to competitive adsorption.     

Optimal flow conditions of a tracheobronchial model to reengineer lung structures

The high demand for lung transplants cannot be matched by an adequate number of lungs from donors. Since fully ex-novo lungs are far from being feasible, tissue engi-neering is actively considering implantation of engineered lungs where the devitalized structure of a donor is used as scaffold to be repopulated by stem cells of the receiv-ing patient. A decellularized donated lung is treated inside a bioreactor where transport through the tracheobronchial tree (TBT) will allow for both deposition of stem cells and nour-ishment for their subsequent growth, thus developing new lung tissue. The key concern is to set optimally the boundary conditions to utilize in the bioreactor. We propose a pre-dictive model of slow liquid ventilation, which combines a one-dimensional (1-D) mathematical model of the TBT and a solute deposition model strongly dependent on fluid velocity across the tree. With it, we were able to track and drive the concentration of a generic solute across the airways, look-ing for its optimal distribution. This was given by properly adjusting the pumps' regime serving the bioreactor. A feed-back system, created by coupling the two models, allowed us to derive the optimal pattern. The TBT model can be easily invertible, thus yielding a straightforward flow/pressure law at the inlet to optimize the efficiency of the bioreactor.     

Shear Stress and Dielectric Analysis of H3PO4 Doped Polyaniline Based Electrorheological Fluid

We synthesized phosphoric acid (PA) doped polyaniline (PANI) particles (PANI‐PA) and investigated their electrorheological (ER) and dielectric characteristics when they were dispersed in silicone oil. Flow curves of the PANI‐PA based ER fluid under several applied electric field strengths were analyzed using a shear stress model. We also examined ER characteristics based on the relaxation time obtained from the dielectric spectrum.     

Magnetic fluids stabilized by polypropylene glycol

A series of samples of magnetic fluids stabilized with low-molecular weight polypropylene glycol (PPG) of different molecular masses were synthesized. The use of PPG allowed the maximum extension of the carrier fluid range to include ethyl- and butyl-acetate, ethanol, butanol, acetone, carbon tetrachloride, toluene, kerosene and PPG itself. Magnetic and rheological properties of the samples were investigated. Based on the results of investigation it has been concluded that magnetic nanoparticles are covered by a monolayer of surfactant molecules. At low temperatures the propanol-based sample preserves fluidity up to −115 °C. Measurement of critical temperatures of other base fluids showed that alcohols are the best carrier medium. Coagulation stability of the ethanol-based ferrocolloid with respect to water and kerosene was explored. It has been found that kerosene, whose fraction by weight exceeds 22.5%, does not mix with the colloid. This effect can be used to produce magneto-controllable extractors of ethyl alcohol. Under the action of water the colloid coagulates, which allows one to substitute the carrier fluid and to separate the colloid into fractions.     

A filter‐based,mass‐conserving lattice Boltzmann method for immiscible multiphase flows

Some issues of He–Chen–Zhang lattice Boltzmann equation (LBE) method (referred as HCZ model) (J. Comput. Physics 1999; 152 :642–663) for immiscible multiphase flows with large density ratio are assessed in this paper. An extended HCZ model with a filter technique and mass correction procedure is proposed based on HCZ's LBE multiphase model. The original HCZ model is capable of maintaining a thin interface but is prone to generating unphysical oscillations in surface tension and index function at moderate values of density ratio. With a filtering technique, the monotonic variation of the index function across the interface is maintained with larger density ratio. Kim's surface tension formulation for diffuse–interface method (J. Comput. Physics 2005; 204 :784–804) is then used to remove unphysical oscillation in the surface tension. Furthermore, as the density ratio increases, the effect of velocity divergence term neglected in the original HCZ model causes significant unphysical mass sources near the interface. By keeping the velocity divergence term, the unphysical mass sources near the interface can be removed with large density ratio. The long‐time accumulation of the modeling and/or numerical errors in the HCZ model also results in the error of mass conservation of each dispersed phase. A mass correction procedure is devised to improve the performance of the method in this regard. For flows over a stationary and a rising bubble, and capillary waves with density ratio up to 100, the present approach yields solutions with interface thickness of about five to six lattices and no long‐time diffusion, significantly advancing the performance of the LBE method for multiphase flow simulations. Copyright © 2010 John Wiley & Sons, Ltd.     

The effect of a market factor on information flow between stocks using the minimal spanning tree

We empirically investigated the effects of market factors on the information flow created from N(N−1)/2 linkage relationships among stocks. We also examined the possibility of employing the minimal spanning tree (MST) method, which is capable of reducing the number of links to N−1. We determined that market factors carry important information value regarding information flow among stocks. Moreover, the information flow among stocks showed time-varying properties according to the changes in market status. In particular, we noted that the information flow increased dramatically during periods of market crises. Finally, we confirmed, via the MST method, that the information flow among stocks could be assessed effectively with the reduced linkage relationships among all links among stocks from the perspective of the overall market.     

Constrained moving least‐squares immersed boundary method for fluid‐structure interaction analysis

A numerical method is presented for the analysis of interactions of inviscid and compressible flows with arbitrarily shaped stationary or moving rigid solids. The fluid equations are solved on a fixed rectangular Cartesian grid by using a higher‐order finite difference method based on the fifth‐order WENO scheme. A constrained moving least‐squares sharp interface method is proposed to enforce the Neumann‐type boundary conditions on the fluid‐solid interface by using a penalty term, while the Dirichlet boundary conditions are directly enforced. The solution of the fluid flow and the solid motion equations is advanced in time by staggerly using, respectively, the third‐order Runge‐Kutta and the implicit Newmark integration schemes. The stability and the robustness of the proposed method have been demonstrated by analyzing 5 challenging problems. For these problems, the numerical results have been found to agree well with their analytical and numerical solutions available in the literature. Effects of the support domain size and values assigned to the penalty parameter on the stability and the accuracy of the present method are also discussed.