截断光束的广义M2因子

使用渐近分析法、广义截断二阶矩法和自收敛束宽法研究了旋转对称截断光束的广义M2因子，分析了这三种方法的物理联系以及如何惟一确定广义M2因子问题，并用数值计算结果做了说明. 关键词： 广义M2因子 渐近分析 广义截断二阶矩法 自收敛束宽     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子     

Fabrication of isotype (p-p) selenium-polyaniline heterojunction diode by electrochemical method

In the present work, for the first time, heterojunction has been fabricated using electrochemically deposited isotype p-selenium-p-polyaniline from a single solution bath. The structural characterization of selenium and polyaniline thin film was carried out using XRD technique. Polyaniline exhibited amorphous structure while selenium offered monoclinic (β) phase. The junction was formed by electrodepositing polyaniline over selenium film and heating at 423 K. The current density versus voltage (J-V) plot showed the formation of a junction with ideality factor of 1.16. From J-V characteristics at different temperatures, static resistance (R_s), dynamic resistance (R_d), and rectification ratio of diodes were determined. Heat treatment above 448 K caused junction breakdown.     

Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006     

Monitoring hydration state conversion by TG-DTA

Characterization of the solid-state form (hydrate or polymorph) of a pharmaceutical active is a key scientific and regulatory requirement during development of and prior to seeking approval for marketing of the drug product. A variety of analytical methods are available to perform this task. By nature of the fundamental information it provides, TG-DTA offers advantages over other methods in regards to monitoring and quantitation of hydration state changes. In a single experiment with only a few milligrams of sample, TG-DTA perceives minor changes in phase, quantitates total water content and percent conversion, and illustrates hydrate type. All of this is accomplished without the necessity of generating time-consuming standard curves representing the differing ratios of hydrated to anhydrous forms. This study describes the use of TG-DTA to monitor and quantitate humidity induced solid–solid phase conversion of nitrofurantoin and risedronate. Percent conversion was qualitatively observed by both TG and DTA signals and quantitated by the TG.     

Communication Roles, Perceived Effectiveness, and Satisfaction in an Environmental Management Program

Earlier research has shown a relationship between various forms of structural centrality and perceived leadership and role satisfaction in small experimental groups. The limited amount of research on this topic in naturally occurring social networks has yielded results that often conflict with one another. Different results have generally been attributed to possible differences in task environments. This paper examines the relationship between two types of structural centrality and perceived influence, role satisfaction, and perceived effectiveness in an environmental resource management program. Findings in this paper suggest that the observed differences in relationships between the network and other variables is partly a function of global network properties (e.g., marginality of subgroups) and related task environments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Gas transport through homogeneous and asymmetric polyethersulfone membranes

Both homogeneous and asymmetric polyethersulfone (PES) membranes were prepared by solvent casting. The sorption and permeation behavior of CO₂, O₂, and N₂ using these two kinds of cast PES membranes and commercially available homogeneous PES film was investigated to extract the pressure dependence of gas permeability and the permselectivity for CO₂ relative to N₂, and to confirm the validity of the working assumption that a skin layer in an asymmetric membrane can be essentially replaced by a thick homogeneous dense membrane. The pressure dependence of the mean permeability coefficient to CO₂ in homogeneous membranes obeys the dual-mode mobility model. The ideal separation factor for CO₂ relative to N₂ at an upstream pressure of 0.5 MPa attains ca. 40, while the permeability to CO₂ is about 2.7 Barrer at the same upstream pressure. The same separation factor in asymmetric membranes amounts to 35. The diffusion behavior for the skin layer in an asymmetric membrane with a thin skin layer can be simulated approximately by that in a homogeneous dense membrane. © 1993 John Wiley & Sons, Inc.     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

A Monte Carlo method for an objective Bayesian procedure

This paper describes a method for an objective selection of the optimal prior distribution, or for adjusting its hyper-parameter, among the competing priors for a variety of Bayesian models. In order to implement this method, the integration of very high dimensional functions is required to get the normalizing constants of the posterior and even of the prior distribution. The logarithm of the high dimensional integral is reduced to the one-dimensional integration of a cerain function with respect to the scalar parameter over the range of the unit interval. Having decided the prior, the Bayes estimate or the posterior mean is used mainly here in addition to the posterior mode. All of these are based on the simulation of Gibbs distributions such as Metropolis' Monte Carlo algorithm. The improvement of the integration's accuracy is substantial in comparison with the conventional crude Monte Carlo integration. In the present method, we have essentially no practical restrictions in modeling the prior and the likelihood. Illustrative artificial data of the lattice system are given to show the practicability of the present procedure.