Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Muscle oxygenation measurement in humans by noninvasive optical spectroscopy and Locally Weighted Regression

We have developed a method to make real-time, continuous, noninvasive measurements of muscle oxygenation (Mox) from the surface of the skin. A key development was measurement in both the visible and near infrared (NIR) regions. Measurement of both oxygenated and deoxygenated myoglobin and hemoglobin resulted in a more accurate measurement of Mox than could be achieved with measurement of only the deoxygenated components, as in traditional near-infrared spectroscopy (NIRS). Using the second derivative with respect to wavelength reduced the effects of scattering on the spectra and also made oxygenated and deoxygenated forms more distinguishable from each other. Selecting spectral bands where oxygenated and deoxygenated forms absorb filtered out noise and spectral features unrelated to Mox. NIR and visible bands were scaled relative to each other in order to correct for errors introduced by normalization. Multivariate Curve Resolution (MCR) was used to estimate Mox from spectra within each data set collected from healthy subjects. A Locally Weighted Regression (LWR) model was built from calibration set spectra and associated Mox values from 20 subjects using 2562 spectra. LWR and Partial Least Squares (PLS) allow accurate measurement of Mox despite variations in skin pigment or fat layer thickness in different subjects. The method estimated Mox in five healthy subjects with an RMSE of 5.4%.     

Non‐symmetric bent‐core mesogens with one terminal vinyl group

Two series of non‐symmetric banana‐shaped compounds, both with one alkyl and one alkenyl terminal tail, have been synthesized and studied. Both series were compared with the corresponding series with two saturated terminal alkyl tails. All the compounds have a bent central 1,3‐phenylene bis(4‐benzoyloxy)benzoate core; their mesophases were characterized by polarizing optical microscopy, differential scanning calorimetry, X‐ray diffraction and switching current response experiments. In all four series one of the terminal tails is varied from OC₈H₁₇ to OC₁₆H₃₃. The other terminal tails are OC₁₁H₂₃, O(CH₂)₉CH?=?CH₂, OC₁₀H₂₁ and O(CH₂)₈CH?=?CH₂. The short‐tailed compounds show monotropic or enantiotropic B₁ phases and the long‐tailed compounds the B₂ phase. The introduction of one terminal vinyl group slightly lowers the transition temperatures. The introduction of a second terminal vinyl group further suppresses the liquid crystalline properties. All compounds with B₂ phases have layer spacings that suggest a tilt of ～45° of the bent molecules in the layers, and their switching behaviour is antiferroelectric.     

Ionic liquids as stationary phases in gas chromatography: Determination of chlorobenzenes in soils

The present research focuses on the evaluation of different ionic liquid (IL) stationary phases in gas chromatography. The different IL columns were evaluated in terms of peak resolution (R_s) and peak symmetry for the separation of the chlorobenzenes. The determination of chlorobenzenes in soil samples by means of the optimal IL stationary phase (SLB‐IL82) is proposed as an application. Soil pretreatment was based on a simplified quick, easy, cheap, effective, rugged, and safe extraction procedure and a large injection volume via a programed temperature vaporizer working in solvent vent mode. The retention time of the chlorobenzenes increased as the polarity of the IL column decreased. SLB‐IL82 is the stationary phase that provides the best values as regards R_s and asymmetry factor. Soil sample blanks were spiked with the analytes before subjecting the sample to the extraction process. The existence of a matrix effect was checked and the analytical characteristics of the method were determined in a fortified garden soil sample. The method provided good linearity, good repeatability and reproducibility values, and the LODs were in the 0.1–4.7 μg/kg range. Two fortified soil samples were applied to validate the proposed methodology.     

Frequency combinations in the magnetoresistance oscillations spectrum of a linear chain of coupled orbits with a high scattering rate

The oscillatory magnetoresistance spectrum of the organic metal (BEDO)₅Ni(CN)₄. 3C₂H₄(OH)₂ has been studied up to 50 T, in the temperature range from 1.5 K to 4.2 K. In high magnetic field, its Fermi surface corresponds to a linear chain of quasi-two-dimensional orbits coupled by magnetic breakdown (MB). The scattering rate consistently deduced from the data relevant to the basic α and the MB-induced β orbits is very large which points to a significant reduction of the chemical potential oscillation. Despite of this feature, the oscillations spectrum exhibits many frequency combinations. Their effective masses and (or) Dingle temperature are not in agreement with either the predictions of the quantum interference model or the semiclassical model of Falicov and Stachowiak.     

On the predictivity of the non‐renormalizable quantum field theories

Following a Four Dimensional Renormalization approach to ultraviolet divergences (FDR), we extend the concept of predictivity to non‐renormalizable quantum field theories at arbitrarily large perturbative orders. The idea of topological renormalization is introduced, which keeps a finite value for the parameters of the theory by trading the usual order‐by‐order renormalization procedure for an order‐by‐order redefinition of the perturbative vacuum. One additional measurement is then sufficient to systematically compute quantum corrections at any loop order, with no need of absorbing ultraviolet infinities in the Lagrangian.     

Rashba效应对量子线中束缚磁极化子性质的影响

采用改进的线性组合算符和幺正变换相结合的方法研究了Rashba效应对抛物量子线中强耦合束缚磁极化子性质的影响.计算了抛物量子线中强耦合束缚磁极化子的有效质量和振动频率,对Rb Cl材料的数值计算结果表明:量子线中强耦合束缚磁极化子的振动频率随受限强度和回旋频率的增加而增大;有效质量与磁极化子的受限强度、回旋频率和电子面密度有关,在Rashba效应影响下有效质量随上述各量的变化曲线都发生了分裂.     

Model correction for the formation of amorphous silicon by ion implantation

The critical dose at which an implanted amorphous layer in silicon is formed cannot be explained by a previous energy independent model. An energy dependent correction to this model can explain our ESR data as well as other data. The correction is most important for light ions.