水准折光及双波长激光效应

本文从“同温度层不完全平行于地面,且在变化”的“任意分层”假设出发,导出了水准折光修正公式,并利用光的色散效应在10~(-6)的精度要求下,求得r=r_T=h_1/h_2=(n_(01)-1)/(n_(02)-1)=常数最后指出,研制双波长激光水准仪的必要性和可能性,并提出了研制此种仪器的技术参数.     

氯离子柱撑水滑石共沉淀法合成反应动力学

根据氯离子型层状复合氢氧化物(LDH-Cl)制备过程中溶液浓度变化的监测结果和不同反应进程时产物的EDS、IR、XRD、TEM、TG-DTA表征结果,研究了合成LDH-Cl的共沉淀反应动力学特征及机理.实验结果表明, LDH-Cl的生成符合多核层表面反应动力学模型;反应过程中LDH的晶胞参数c从2.421 nm变为2.399 nm,通道高度h由0.3321 nm减小为0.3228 nm,粒子直径Da由6.40 nm增大为15.16 nm, Dc由7.43 nm增大到10.93 nm,纵横比由0.86增大为1.39; IR和TG-DTA特征变化表明了层板对阴离子作用的强度和层板的结构稳定性随反应进程而提高.     

稀土富勒烯生成的影响因素初探

采用某些特殊的放电和提取方法，如反向放电和甲苯高温高压提取等可以有效地提高稀土富勒烯的生成效率［‘，‘’，并已先后成功高效地合成了许多含稀土富勒烯「‘’．对其提纯、表征、衍生和应用也进行了研究［‘－’j．但对影响稀土富勒烯生成的因素研究较少．在石墨律中同时填入La，Y，Sc的稀土氧化物，对其稀土富勒烯生成效率的情况进行了研究，认为稀土元素的第一电离能是影响稀土富勒烯生成的主要因素‘’，’‘．Moro等采用激光和热解吸质谱对稀土富勒烯的研究结果表明，稀土元素的氧化态是影响稀土富勒烯生成的决定性因素”’．本…     

维生素B类药物在薄层原位的近红外付立叶变换表面增强拉曼光谱

维生素Ｂ类药物在薄层原位的近红外付立叶变换表面增强拉曼光谱汪瑗，于秉正张煦（首都师范大学分析测试中心北京１０００３７）（北京大学分析测试中心北京）关键词维生素Ｂ_１，维生素Ｂ_２，薄层色谱，表面增强拉曼散射，近红外付立叶变换拉曼光谱将薄层色谱（ＴＬＣ）...     

Electrical Potential Distribution around a Charged Colloidal Particle: Nonlinear Integral Equation

多电解质溶液中带电胶体粒子的电势分布由球形Ｐｏｉｓｓｏｎ－Ｂｏｌｔｚｍａｎｎ方程（ＰＢＥ）描述．ＰＢＥ是一个非线性的微分方程，且难以求得其解析解．本文采用非线性Ｐ－Ｂ积分方程，计算电势分布的数值解．首先，根据静电场和热力学系统中的物理定理，导出描述电势分布的Ｐ－Ｂ积分方程（ＰＢＩＥ）；其次，用迭代方法求ＰＢＩＥ的数值解．最后，计算了在３－１型电解液中无量纲半径κａ分别为０．１２和０．２２，无量纲表面电势ξ分别为１，２，４，６时球形胶体粒子外部的电势值．为了检验数值解的精度，计算了表面电荷密度，并与Ｌｏｅｂ（１９６１）和Ｏｓｈｉｍａ（１９９５）等人的结果比较，本文结果的相对误差小于１％，优于Ｏｓｈｉｍａ的结果．     

无机层状复合氢氧化物中顺铂-DNA模型分子的选择性插入

药物分子的选择性包裹和控制释放是药物研究领域中具有挑战性的研究方向。本文研究表明:顺铂-DNA模型分子cis-[Pt(NH₃)₂(5′-GMP)₂](5′-GMP 5′-单磷酸鸟苷)可插入无机层状复合氢氧化物[Zn_0.68Al_0.32(OH)₂](NO₃)_0.32·mH₂O。但另一种层状复合氢氧化物[LiAl₂(OH)₆]Cl·H₂O由于其阳离子层中正电荷密度较高、阳离子层与层间阴离子之间静电作用较强,因而顺铂-DNA模型分子不能通过离子交换方式插入其层间。光谱数据证实插入层间的顺铂-DNA模型分子结构不变。这可能为铂-DNA分子的传递提供新的方法。     

Mn位掺杂钙钛矿结构化合物LaSr2Mn2-xNixO7的磁性和电性的研究

The effect of Ni substitution for Mn on magnetic and transport properties has been investigated for layered manganese oxides LaSr₂Mn_2-xNi_xO₇. Nickel doping hampered the canted antiferromagnetic (AFM) exchange at low temperature and their Neel temperature (T_N) decreased from 138 K (x=0) to 102 K (x=0.3). Meanwhile, spin glass, charge ordering and metal-insulator transition are suppressed by Ni addition. The resistivity increases obviously with increasing x due to double exchange interaction channel broken by Ni²⁺ addition. The resistivity of all samples in low temperature range fits to the Mott′s variable rang hopping (VRH) model, while it fits to nearest neighbor hopping of small polarons model in high temperature range.     

Chromium and yttrium-doped magnesium aluminum oxides prepared from layered double hydroxides

Layered double hydroxides with the hydrotalcite-like structures, containing Mg²⁺ and Al³⁺, doped with Cr³⁺ and Y³⁺, have been prepared by precipitation at constant pH. The weight percentages of Cr³⁺ and Y³⁺ were 1, 2, or 3%, and 0.5 or 1%, respectively. Single phases were obtained in all cases, whose crystallinity decreased as the content in Cr and Y was increased. The solids have been characterised by element chemical analysis, powder X-ray diffraction, thermal analyses (differential, thermogravimetric and programmed reduction), FT-IR and UV–vis spectroscopies; the specific surface areas have been determined from nitrogen adsorption isotherms at −196 °C. Upon calcination at 1200 °C for 5 h in air all solids display a mixed structure (spinel and rock salt for MgO); these solids have also been characterised by these techniques and their chromatic coordinates (CIE – L^*a^*b^*) have been determined. Their pink colour makes these solids suitable for being used as ceramic pigments.     

FT-IR and Raman spectroscopic study of hydrated rubidium (cesium) borates and alkali double borates

FT-IR and Raman spectra of five hydrated alkali borates and five hydrated alkali double borates have been recorded at room temperature in the range 400 to 4000 cm⁻¹, and analyzed. Fundamental vibrational modes have been identified and assignments tentatively made in comparison with the work of Janda and Heller, and Li Jun. The text was submitted by the authors in English.