基于遗传算法的波长选择方法在绿茶近红外光谱分析模型中的应用

利用遗传算法(GA)提取茶叶的近红外吸收特征波长的方法,研究建立了绿茶水分和氨基酸的近红外分析模型,并对波长选择前后两种成分的模型进行了比较分析。结果表明,经遗传算法波长选择后,简化了分析模型,同时模型的稳健性增强。氨基酸预测集的均方根误差(SEP)减小82.1%,水分预测集的均方根误差减小(SEP)76.6%,它们在波长选择前后对应的分析波长数之比分别为995∶7和1990∶33。     

一种新型极性脲丙基-C30固定相的制备和性能评价

以3-脲丙基三甲氧基硅烷为偶联剂，制备了一种新型极性脲丙基-C30（TPU-C30）反相色谱固定相。采用扫描电子显微镜、元素分析、红外光谱和热分析等对该固定相进行表征。结果表明，TPU-C30固定相已成功制备，连续制备3次固定相，其元素含量的相对偏差均小于5%，说明该合成工艺重复性良好。以不同极性、位置异构、碱性化合物为溶质探针，以传统的C18色谱柱与C30色谱柱为参比，对制备的固定相的色谱性能进行了研究。研究结果表明，TPU-C30固定相具有不同于传统C18柱、C30柱的选择性和更优的择形性，明显改善了碱性物质的峰形，其具有广阔的应用空间。     

Value function and optimality conditions for semilinear control problems

This paper is concerned with optimal control problems of Mayer and Bolza type for systems governed by a semilinear state equationx(t)=Ax(t) + f(t, x(t), u(t)), u(t) U, whereA is the infinitesimal generator of a strongly continuous semigroup in a Banach spaceX. We prove necessary and sufficient conditions for optimality and then use these conditions to investigate properties of the value function related to superdifferentials. Conversely, we use the value function to obtain criteria for optimality and feedback systems.Work (partially) supported by the Research Project Equazioni di evoluzione e applicazioni fisicomatematiche (M.U.R.S.T.-Italy).     

Study of isomorphism in fluorine-containing antimony(III) complexes

The mutual influence of the atoms on the composition of solid fluorine-containing antimony(iii) complexes formed in aqueous solutions in the (MF) _x −(M′F) _n−x −SbF₃ (M, M′=Na, K, Rb, Cs, and NH₄;n=1, 2;x=0 to 2), (KNO₂) _n −(KY) _n −SbF₃ (Y=F, Cl, SO₄;n=0.5, 1), and K₂SbF₅−K₂SbCl₅ systems was investigated by elemental, X-ray, and thermogravimetric analyses and by IR and^121,123Sb NQR spectroscopy. The isomorphism conditions for fluorine-containing antimony(iii) compounds resulting in the formation of complexes NaM′SbF₅·1.5H₂O (M′=K and Rb), K₂SbF₅·1.5H₂O, NaCs₃Sb₄F₁₆·H₂O, KsbF₃Cl, K₂SbF₂Cl₃ with constant compositions, continuous M _x M′_2−x SbF₅ (0<x<2) and limited M _x M′_1−x SbF₄ (0.25<x<0.75; M, M′=K, Rb, Cs, and NH₄) solid solutions or LiF+MSbF₄ (M=Na, K, Rb, and Cs), M₂SbF₅+Cs₂SbF₅ (M=Na and K) and MSbF₄+NaSbF₄ (M=Rb and NH₄) mechanical mixtures were determined. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 103–108, January, 1999.     

Continuous fermentation for the production of citric acid from glucose

Citric acid is finding new areas of use each year and the demand for the acid is constantly increasing. Being a bulk chemical, the continuous production of citric acid would be advantageous. The paper presents the results from ammonia limited batch and continuous fermentations using the yeast strainSaccharomycopsis (Candida) lipolytica (NRRL Y-7576). Mathematical models were developed for growth and glucose utilization in batch and continuous culture. Cell and acid yields appeared to be almost the same in batch and continuous culture. The specific production rates were found to be constant, equal to 0.053 g/g h, in the batch fermentations but varied in the continuous experiments from 0 to 0.11 g/g h depending on the fermentation conditions. Continuous production in a single stage CSTR was studied for over 1,000 hours without shutdown.     

Influence of Fe2O3 and V2O5 on Crystalline Structure of Mg-Al Spinel Synthesized by Waste Aluminum Slag

Mg-Al spinel is synthesized by using industrial waste-residue and basic magnesium carbonate in the aluminum factory as the main raw materials. The influence of V2O5 and Fe2O3 mineralizers on the structure, cell parameters and microscopic morphology of synthesized Mg-Al spinel has been discussed. The Mg-Al spinel is characterized by using XRD, SEM and relevant analytical software, such as Philips plus, Rietveld quantification and so on. The experimental results show that certain amounts of V2O5 and Fe2O3 are beneficial to the formation of Mg-Al spinel, and the optimum addition of V2O5 and Fe2O3 is respectively 2wt% and 3wt%. V2O5 has few effects on cell parameters of Mg-Al spinel; but Fe2O3 can form solid solution with Mg-Al spinel in which Mg-Fe spinel can also dissolve to form continuous solid solution. Therefore, with the increase of Fe2O3 content, the cell parameters of Mg-Al approximately present linear increase.     

Optimization of ammonium nitrate concentration in single-stage continuous cultures of Aspergillus niger with biomass retention

The effect of ammonium nitrate concentration in the citric acid biosynthesis by Aspergillus niger NC-12 in single-stage continuous cultures with biomass retention was investigated. Experiments were carried out in a BIOMER laboratory fermenter with 5 dm³ working volume. At the initial stage of each cultivation, the substrate in the bioreactor contained 1.5 g NH₄NO₃ dm⁻³. After 120 h onwards, the bioreactor was fed continuously at a constant dilution rate of 0.009 h⁻¹. NH₄NO₃ concentration in the feed was varied from one culture to another, ranging between 0.5 g dm⁻³ and 2.5 g dm⁻³. Promising results were obtained when NH₄NO₃ concentration of 1.5 g dm⁻³ was used. The observed concentration of citric acid (c _P) and yield of citric acid with respect to the introduced sucrose (Y _P/S) were 117.88 g dm⁻³ and 78.59 %, respectively. The efficiency coefficient of citric acid biosynthesis (K _ef) was very high, amounting to 83.38. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a “DNA Aptaomics” approach to systematically design functional aptamers as well as to obtain high affinity aptamers.     

Copper-Photocatalyzed Hydrosilylation of Alkynes and Alkenes under Continuous Flow

Herein, the photocatalytic hydrosilylation of alkynes and alkenes under continuous flow conditions is described. By using 0.2 mol % of the developed [Cu(dmp)(XantphosTEPD)]PF₆ under blue LEDs irradiation, a large panel of alkenes and alkynes was hydrosilylated in good to excellent yields with a large functional group tolerance. The mechanism of the reaction was studied, and a plausible scenario was suggested.