Oxidative cyclization of 2-pyrrolidinyl-acetamide and 2-pyrrolidinyl-propionamide local anaesthetics

2 - Pyrrolidinyl - acetamide and -propionamide local anaesthetics (1a–d) on oxidation with mercuric acetate, potassium hexacyanoferrate(III) and potassium permanganate underwent oxidative cyclization to give new bicyclic compounds, hexahydro - 1H - pyrrolo[1,2 - a]imidazolin - 2 - ones (2a–d). The propionamides (1c–d) yielded mixtures of the two possible diastereoisomers of 2c and 2d. These were separated; in solution and above their melting points they epimerized via ring opening and reclosure between the 7a-carbon and 1-nitrogen atoms.     

Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.     

Synthesis, structure, and electrochemical properties of 12,42-dioxo-21,31-diphenyl-7,10,13-trioxa-1,4(3,1)-diquinoxalina-2(2,3),3(3,2)-diindolizinacyclopentadecaphane

The oxidative dehydrocyclization of the 3-(indolizin-2′-yl)-2-oxoquinoxaline monopodand performed either electrochemically or under the action of molecular iodine affords new redox-active heterocyclophane consisting of the redox-switchable biindolizine fragment combined with the polyether-bridged π-deficient quinoxaline systems. The single-crystal X-ray diffraction study showed that the trioxaundecane chain of heterocyclophane adopts an extended conformation, and one of the phenyl substituents of the molecule closes the pseudocavity formed by the spacer from one of the sides. The cyclic voltammetric study of heterocyclophane in MeCN and DMF showed the three-step oxidation of the indolizine fragments accompanied by the single-electron transfer in each step. The first and third steps are reversible, and the second step is irreversible. The oxidation at potentials of the first peak gives rise to stable radical cations detected by the ESR method (g = 2.0024, a _2N = 0.26 mT). Dedicated to Professor E. A. Berdnikov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1991–2003, October, 2007.     

TRITERPENE GLYCOSIDES FROM Tetrapanax papyriferum. III. MINOR MONODESMOSIDE GLYCOSIDES FROM STEM BARK

Minor monodesmoside triterpene glycosides St-A, St-B, St-C ₁ , St-D ₁ , St-C ₂ , and St-D ₂ were isolated from stem bark ofTetrapanax papyriferumC. Koch (Araliaceae). The structures of oleanolic and echinocystic acid 3-O--L-arabinopyranosides, oleanolic and echinocystic acid 3-O--D-glucopyranosyl-(13)-O--L-arabinopyranosides, and oleanolic and echinocystic acid 3-O--D-galactopyranosyl-(12)-O--L-arabinopyranosides, respectively, were proposed. Glycosides St-C ₂ , St-D ₁ , and St-D ₂ are new triterpene glycosides. The structures of the isolated compounds were established using chemical methods and NMR spectroscopy.     

Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

Evaluation of digestion procedures for the determination of iron and zinc in biscuits by flame atomic absorption spectrometry

An evaluation is made of different digestion methods for the determination of iron and zinc in biscuits prior to flame atomic absorption analysis. For the initial studies, microwave digestion was enough (using hydrogen chloride and nitric acid 3:1, v/v, at 180 °C and 600 W) to provide comparable accuracy, precision, digestion time and non-critical handling of reagents to dry-ashing and wet digestion (using different acid mixtures) and also to a simple acid treatment at room temperature. Although, after a simple microwave digestion, the spiked recoveries were found around 96–102%, to reduce the digestion time and for simplicity we worked on wet acid treatments. The results showed that acid-only treatment is not enough to digest the samples without adding ethanol, which was found necessary to digest organic residue at room temperature. The method was validated by comparison of the data found for commercial biscuit samples through using the proposed procedure and the AOAC official reference spectrophotometric method. Fe concentration in the different biscuits (such as petit beurre, baby biscuits, etc.) ranged from 1.21 to 15.96 mg/100 g while Zn concentration ranged from 0.58 to 2.50 mg/100 g depending on biscuit type. The highest concentration of Fe was in baby biscuits and these biscuits were about thirteen times richer in Fe than petit beurre biscuits.     

GC-MS法测定粮谷及油料中55种有机磷农药残留量

采用ASE-300快速溶剂萃取仪提取样品中农药残留量,提取液经二氯甲烷液-液分配、凝胶色谱柱（GPC）净化,固相萃取柱（活性炭）再净化,浓缩定容后,用气相色谱-质谱仪（GC-MS）测定,外标法定量.采用选择离子检测进行阳性确证.选择玉米、糙米、大豆、花生为实验样品、敌敌畏等55种农药添加水平在0.5～2.00 mg/kg时,该方法回收率为68%～117%;精密度为4.04%～11.76%;方法测定低限为0.005～0.100 mg/kg,各项指标均满足有关要求.     

Study of the winter and summer changes of the air composition in the church of Szalowa, Poland, related to conservation

The St. Michael Archangel’s Church in Szalowa, Poland, was selected for closer investigation with respect to the indoor/outdoor air exchange and its influence on the air quality and work arts preservation. Chemical composition, size and abundance of particulate matter and concentration of gases NO₂, SO₂, O₃ inside and outside the church were determined. To study seasonal variation of the weather condition (temperature, inversion level, wind direction) and the influence of seasonal sources of the air pollution (like heating of the nearby houses), samples were collected in winter and summer time. It was stated that suspended particulate matter inside the wooden church has in general an outdoor source. Several groups of particles were distinguished such as the organic ones, soil dust, nitrates and sulphates. In case of organic and soil dust particles, the concentration inside was higher than outside. From the results, in comparison to literature data, one can conclude that accumulation of particulate suspended matter in the church is more intense than in other types of buildings. Gaseous pollutants were detected but their concentration was negligible.     

Quality assurance in research laboratories

During the last decade, it has become increasingly important that researchers demonstrate that research is conducted to the highest standards. The implementation of quality assurance for research laboratories will enable all fields of research and development to be judged impartially. There are no specific standards for research laboratories but where possible, existing standards can be adapted. This review is structured around two approaches. The first considers research to be a logical extension of testing, and it is assumed that testing standards can be applied methodically to each step in a research project. The second advocates a flexible approach, with research-specific criteria for assessing quality. The important papers published on this topic have been reviewed. The conclusions are that the general quality management approach, encompassed by the ISO 9000 series of standards with the emphasis on customer satisfaction and ‘fitness for purpose’, is suitable for implementing quality assurance in research laboratories.