The role of microstructure on the mechanical properties of polyurethane foams containing thermoregulating microcapsules

Rigid polyurethane foams with up to 50 wt% of microcapsules from LDPE-EVA containing Rubitherm^®RT27 were synthesized. The influence of microcapsules on the foams density, microstructure and mechanical resistance was studied. Cell size and strut and wall thicknesses were analyzed by SEM. The relationships between densities and foam microstructures with their Young's moduli and collapse stress were found by the Gibson and Ashby formulations and the Kerner equation for mechanical properties of composites. It was found a cell structure change from polyhedral closed-cells to spherical or amorphous open-cells. A good agreement between the experimental and theoretical data was observed but requiring a cell form factor. Thus, Fitting parameters confirmed the high trend of these microcapsules to be incorporated into the foam cell walls and the form factors depicted the abrupt change of cell morphology. Thus, these equations are suitable for predicting the mechanical properties of foams containing fillers of low mechanical resistance.     

Synthesis of the polyethylene glycol solid-solid phase change materials with a functionalized graphene oxide for thermal energy storage

Polyethylene glycol (PEG) as a phase change material possesses three obstacles, such as leakage, low thermal conductivity and low thermal stability. A novel solid-solid phase change material (PCM) based on functionalized graphene oxide (GO), Polyethylene glycol (PEG) was prepared, and the three obstacles of PEG as a PCM was solved in one and the same material. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman and Transmission electron microscope (TEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and thermogravimetric analysis/infrared spectrometry (TG-IR) were used to study the properties of supporting material and composite PCM (CPCM). The results indicated that the PEG was grafted on the surface of the supporting material; Compared with pure PEG, the latent heat of CPCM with 9.6 wt% supporting material decreased only 5.3%, however, the thermal conductivity of CPCM increased 111% and the heat peak release rate of CPCM decreased 33.4%.     

Applying the combined integral method to one-dimensional ablation

In this paper the combined integral method is applied to a simple one-dimensional ablation problem. One of the drawbacks of heat balance integral methods is how to choose the approximating function. It is common to use a polynomial form but even then it is not clear what the power of the highest order term should be. Previous studies have determined exponents either from exact solutions or from expansions valid over short time scales; neither approach is satisfactory nor very accurate for larger times. We combine the heat balance and refined integral methods to determine this exponent as part of the solution process, and conclude that it is in fact time-dependent in the ablation stage. From comparing the approximate solutions with numerical and exact analytical solutions whenever possible, we show that this new method greatly improves the accuracy on standard methods, without overcomplicating the method.     

Effects of ultra-strong magnetic field on electron capture rates of 55C0 and 56Ni in the magnetar surrounding

The electron capture rates of 55Co and 56Ni in the ultra-strong magnetic field at four typical temperature- density points have been calculated using the nuclear shell model and Landan energy levels quantized approximate correction. The results show that the electron capture rates of 55Co and 56Ni are increased greatly in the ultra-strong magnetic field, and even exceed two orders of magnitude in the range from 4.414×10^13G to 2.207×10^27 G. The change rate of electron abundance, ye, of 55Co and 56Ni under the condition of B=4.414×10^15G in the magnetar surrounding has been calculated and discussed, the proportions of ye of 55Co and 56Ni in the total Ye have been reduced by 50 percent in all more than the condition without a magnetic field.     

Stark Hole-Burning Spectroscopy of Cresylviolet Perchlorate in Amorphous Hosts

Stark hole-burning spectroscopy is used to investigate the effective dipole moment change of cresylviolet perchlorate (CVP) in various glass and polymer hosts such as ethanol:methanol (EM), polyvinyl alcohol (PVA), poly (2-hydroxyethyl) methacrylate (PHEMA), polyvinylbutyral (PVB), and formamide. The strong correlation between effective dipole moment change of the guest molecule and the holeburning efficiencies of the host matrices illustrates the sensitivity of the dipole moment change as a direct measure of guest-host interactions. Hole-burning is found to be more efficient as the dipole induced reaction field increases. This relationship is discussed in terms of the unusual hole-burning mechanism suggested for this molecule. The effective dipole moment change of cresylviolet perchlorate ranges from 0.14 to 0.59 Debye.     

UV–vis and fluorescence detection by receptors based on an isophthalamide bearing a phenylethynyl group

We have successfully prepared 5-(2-phenylethynyl)isophathalilc acid as a signaling unit and the corresponding derivatives for an anion receptor 2 and a barbiturate receptor 4. Receptor 2 showed characteristic UV–vis changes and dramatic fluorescence quenching upon the addition of anions and receptor 4 showed UV–vis and an OFF-ON fluorescence changes upon the addition of dibutylbarbituric acid based on the diphenylethyne moiety.     

A superhydrophobic magnetic elastomer actuator for droplet motion control

For the fast droplet transportation on an open surface, a new magnetic elastomer with a superhydrophobic surface has been developed. Because the surface is superhydrophobic, the water droplet can easily roll off on the surface. The movement of the droplet was controlled by a deliberate local deformation of the surface of the elastomer induced by magnetic actuation. The direction and speed of the droplet motion was easily controlled by changing the surface topography using magnetic force. We also demonstrate the applicability of the devices as a new type of open‐surface digital microfluidics using a simple chemical reaction. Copyright © 2013 John Wiley & Sons, Ltd.     

Core/Shell Structured PCM Nanocapsules Obtained by Resin Fortified Emulsion Process

Phase change material (PCM, octadecane) nanocapsules were successfully prepared by resin fortified emulsion (RFE) polymerization using the alkali soluble resin (ASR) of poly(ethylene‐co‐acrylic acid) (EAA) and poly(styrene‐co‐acrylic acid) (SAA). Stable PCM nanocapsules were obtained by resin fortified emulsion polymerization, which could be attributed to the prevention of Ostwald ripening due to PCM being hydrophobic. Analysis of online FTIR measurements throughout the reaction confirmed that the nanocapsules contained octadecane as a PCM. TEM imaging of the PCM nanocapsules showed spherical and core/shell morphology. The characteristics of PCM nanocapsules can be controlled by process parameters. As a result, the particle size and particle size distribution (i.e., polydispersity index (Dw/Dn)) of the PCM nanocapsules were created by adjusting manufacturing conditions. The PCM nanocapsules exhibited thermal energy storage (～49.8 J/g) and release (～47.9 J/g) behavior.     

反应温度对加氢残渣油四组分含量和结构的影响

以沙轻减渣为原料,在高压釜内研究了不同反应温度下加氢反应前后渣油的四组分含量及其结构组成变化。结果表明,加氢残渣油中的饱和分含量明显增加,而芳香分和胶质的含量均降低,四组分含量随反应温度的升高均呈现规律性变化。加氢后四组分的H/C摩尔比和平均相对分子质量均降低,芳碳分率增加。随反应温度升高,四组分的H/C摩尔比和平均相对分子质量降低,烷基碳分率降低;芳香分、胶质和沥青质的芳碳分率增加;胶质和沥青质的总环数和芳环数均降低。渣油加氢过程中四组分都发生了明显的氢解和脱烷基反应。加氢反应中,胶质和沥青质结构单元间的各种桥键可发生明显地断裂,导致其结构单元数减少,且结构单元数随反应温度的升高而减少。     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。