饱和纳米流体多孔介质中竖直嵌入板上边界层的非Newton流

在层流条件下,对饱和多孔介质中的竖直板,研究幂指数型非Newton流的自由对流热交换.非Newton纳米流体服从幂指数型的数学模型,模型综合考虑了Brown运动和热泳的影响.通过相似变换,将问题的偏微分控制方程组,转化为常微分方程组,得到了常微分方程组的数值解.数值解依赖于幂指数n,Lewis数Le,浮力比Nr,Brown运动参数Nb,以及热泳参数Nt.在n和Le的不同取值下,研究并讨论了对相关流体性质参数的影响和简化的Nusselt数.     

A micro-convection model for thermal conductivity of nanofluids

Increase in the specific surface area as well as Brownian motion are supposed to be the most significant reasons for the anomalous enhancement in thermal conductivity of nanofluids. This work presents a semi-empirical approach for the same by emphasizing the above two effects through micro-convection. A new way of modeling thermal conductivity of nanofluids has been explored which is found to agree excellently with a wide range of experimental data obtained by the present authors as well as the data published in literature     

Utilization of Fly Ash Nanofluids in Two-phase Closed Thermosyphon for Enhancing Heat Transfer

This study investigates how fly ash nanofluids affect the thermal performance of a two-phase closed thermosyphon at various states of operation. The utilization of nanofluids obtained from X₂O₃-type oxides, such as Al₂O₃, Fe₂O₃, or CuO, on the improvement of two-phase closed thermosyphon performance was reported in a number of studies in the literature. The present study experimentally demonstrated the effect of using a nanofluid obtained from fly ash comprised of various types of metal oxides in varying ratios on improving the performance of a two-phase closed thermosyphon. The fly ash was obtained from the flue gas that was captured in the cyclones of the Yatagan thermal power plant (Turkey). Triton X-100 (Dow Chemical Company) dispersant was used in the study to produce the 0.2% (wt) fly ash/water nanofluid via direct synthesis. A straight copper tube with an inner diameter of 13 mm, outer diameter of 15 mm, and length of 1 m was used as the two-phase closed thermosyphon. The nanofluid filled 33.3% (44.2 ml) of the volume ofthe two-phase closed thermosyphon. Three heating power levels (200, 300, and 400 W) were used in the experiments with three different flow rates of cooling water (5, 7.5, and 10 g/s) used in the condenser for cooling the system. A increase of 26.39% was achieved in the efficiency of the two-phase closed thermosyphon when 4% (wt) fly ash containing nanofluid was used to replace deionized water at a heat load of 200 W and with a cooling water flow rate of 5 g/s.     

Impact of anisotropic slip on the stagnation-point flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid

The characteristics of heat transfer in the three-dimensional stagnationpoint flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid with anisotropic slip are investigated. The partial differential equations are converted into a system of ordinary differential equations by valid similarity transformations. The simplified mathematical model is solved computationally by the bvp4c approach in the MATLAB operating system. This solving method is capable of generating more than one solutions when suitable initial guesses are proposed. The results are proven to have dual solutions, which consequently lead to the application of a stability analysis that verifies the achievability of the first solution. The findings reveal infinite values of the dual solutions at several measured parameters causing the non-appearance of the turning points and the critical values. The skin friction increases with the addition of nanoparticles, while the escalation of the anisotropic slip effect causes a reduction in the heat transfer rate.     

Heat Transfer Enhancement by Using Copper–Water Nanofluid Flow Inside a Pin Channel

Influences of simultaneous utilization of pin channel and copper–water nanofluid on performance of plate-fin heat exchangers were experimentally explored and compared with results obtained for the base fluid flow inside a plain channel. Experimental results clearly indicate that compared with the plain channel, the pin channel significantly improves the thermal-hydraulic performance of the plate-fin heat exchanger, about 38%. In addition, the heat transfer coefficient as well as pressure drop are increased by using the nanofluids instead of the base fluid. Noticeable average performance factor of 1.65 is obtained for the simultaneous utilization of pin channel and nanofluid inside the plate-fin heat exchanger.     

MHD flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge

The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The results discover that two solutions exist, up to a certain value of the stretching/shrinking and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions for copper and wedge angle parameter increase. It is also found that the hybrid nanofluid enhances the heat transfer rate compared with the regular nanofluid. The reduction of the heat transfer rate is observed with the increase in radiation parameter. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

Rotational flow of Oldroyd-B nanofluid subject to Cattaneo-Christov double diffusion theory

A nanofluid is composed of a base fluid component and nanoparticles, in which the nanoparticles are dispersed in the base fluid. The addition of nanoparticles into a base fluid can remarkably improve the thermal conductivity of the nanofluid, and such an increment of thermal conductivity can play an important role in improving the heat transfer rate of the base fluid. Further, the dynamics of non-Newtonian fluids along with nanoparticles is quite interesting with numerous industrial applications. The present predominately predictive modeling studies the flow of the viscoelastic Oldroyd-B fluid over a rotating disk in the presence of nanoparticles. A progressive amendment in the heat and concentration equations is made by exploiting the Cattaneo-Christov heat and mass flux expressions. The characteristic of the Lorentz force due to the magnetic field applied normal to the disk is studied. The Buongiorno model together with the Cattaneo-Christov theory is implemented in the Oldroyd-B nanofluid flow to investigate the heat and mass transport mechanism. This theory predicts the characteristics of the fluid thermal and solutal relaxation time on the boundary layer flow. The von K′arm′an similarity functions are utilized to convert the partial differential equations(PDEs) into ordinary differential equations(ODEs). A homotopic approach for obtaining the analytical solutions to the governing nonlinear problem is carried out. The graphical results are obtained for the velocity field, temperature, and concentration distributions. Comparisons are made for a limiting case between the numerical and analytical solutions, and the results are found in good agreement. The results reveal that the thermal and solutal relaxation time parameters diminish the temperature and concentration distributions, respectively. The axial flow decreases in the downward direction for higher values of the retardation time parameter. The impact of the thermophoresis parameter boosts the temperature distribution.     

The noble effect of aging on the thermal conductivity of modified CNTs-ethylene glycol nanofluids

In order to improve the heat transfer process by using nanofluids, different nanoparticles and base fluids have been studied. In this work, stability and effect of aging and temperature on the thermal conductivity of CNTs-ethylene glycol (EG) nanofluids were investigated. Chemical functionalisation was used to oxidise the surface of CNTs. The functionalised CNTs were used to prepare the nanofluids by a two-step method. The stability of nanofluids was measured by UV-vis spectroscopy and the results showed that the nanofluids had a good stability over several days. Immediately after nanofluid preparation not too much increase was observed for thermal conductivity but the nanofluid aging had a great influence on the improvement of the thermal conductivity, as after 65 days, about 50% increase was observed. The increase has been attributed to forming an ordered nanolayer of EG molecules around the CNTs. Also no significant temperature dependence of thermal conductivity was observed up to 50°C possibly due to the lack of temperature dependence of CNTs Brownian motions.     

Insights into stretching ratio and velocity slip on MHD rotating flow of Maxwell nanofluid over a stretching sheet: Semi-analytical technique OHAM

Main core part of the research is to develop a novel mathematical model of MHD-Maxwell nanofluid over a stretching and shrinking surface. The stretching ratio, velocity slip and convective boundary conditions are also incorporated. The PDE's with associative boundary conditions are deduced into coupled highly non-linear ODE's by utilizing suitable transformations. The deduced dimensionless sets of Ordinary differential equations are solved by Optimal-Homotopy Analysis Method (OHAM). Behavior of pertinent parameters on the velocity, temperature and concentration fields as well as important aspects skin friction, Nusselt number and Sherwood number are recorded in Table 2. Outcomes declared that role of stretching ratio plays a prominent role in stretching surfaces its clearly recorded in Table 1(a & b).     

Entropy analysis on the bioconvective peristaltic flow of gyrotactic microbes in Eyring-Powell nanofluid through an asymmetric channel

The educational value of nanofluids in several industrial and biological sectors, particularly in fluid movement systems known as peristalsis, has piqued researchers' interest in studying the peristaltic movement of nanofluids. Additionally, nanoparticles have crucial roles in many engineering and manufacturing processes, including those involving heat exchangers, cooling systems, boilers, MEMS, chemical engineering, laser diode arrays, and cool automotive engines. Various studies have been conducted on this subject. This is done by looking at how migratory gyrotactic microorganisms migrate through an artery that is anisotropically narrowing in a blood-based nanofluid that is non-Newtonian. To comprehend, the Powell-Eyring fluid model is used how the blood's rheology differs from that of a Newtonian fluid. Both Newtonian fluid characteristics and non-Newtonian traits can be seen in this fluid pattern. Equations for continuity, temperature, motile microbes, momentum, and concentration are used to create the mathematical formulation. The series solutions, which are produced using perturbation theory solutions are discussed using graphs for all dominant parameters. Discussion also includes the distribution of temperature, velocity, and swimming microorganisms. Additionally, the effects of wall shear stress, the Nusselt and Sherwood numbers, as well as the phenomena of trapping, are all examined in detail and shown in the graphs. Entropy generation analyses have also been undertaken. The investigation also reveals a crucial behaviour in the use of the heart-lung engine for extracorporeal blood circulation in medicine that may have an impact on the damage of red blood cells as a result of the large fluctuation in wall shear stress. When liquids are transported using arthro pumps and roller pumps in living organs, the results are likewise of significant use. The results are very helpful for executing particle movements in cardiac surgery and may be applicable to the fluid peristaltic pump used in haemodialysis.