Characteristics and design procedure of hyperbolic dies

Nozzle profiles capable of generating constant extensional strain rates are termed hyperbolic dies. When used in polymer extrusion, they exhibit greater potential in inducing and retaining polymer molecular orientation than conventional capillary dies. Most mathematical expressions found in the literature involve several processing variables in describing and designing such nozzle profiles. This report reveals that a hyperbolic die profile, although rather complicated, can be expressed with equations in terms of two ordinary geometrical parameters—the exit diameter and the hyperbolic length. This finding greatly simplifies the design procedure of hyperbolic dies. The extensional strain rate of a hyperbolic die can be related to the length-to-diameter ratio for any given exit diameter. Examples of various types of die profiles are presented and their constant extensional strain-rate characteristics are discussed.     

Variable temperature system using vortex tube cooling and fiber optic temperature measurement for low temperature magic angle spinning NMR

We describe the construction and operation of a variable temperature (VT) system for a high field fast magic angle spinning (MAS) probe. The probe is used in NMR investigations of biological macromolecules, where stable setting and continuous measurement of the temperature over periods of several days are required in order to prevent sample overheating and degradation. The VT system described is used at and below room temperature. A vortex tube is used to provide cooling in the temperature range of -20 to 20 degrees C, while a liquid nitrogen-cooled heat exchanger is used below -20 degrees C. Using this arrangement, the lowest temperature that is practically achievable is -140 degrees C. Measurement of the air temperature near the spinning rotor is accomplished using a fiber optic thermometer that utilizes the temperature dependence of the absorption edge of GaAs. The absorption edge of GaAs also has a magnetic field dependence that we have measured and corrected for. This dependence was calibrated at several field strengths using the well-known temperature dependence of the (1)H chemical shift difference of the protons in methanol.     

用可移动电流丝方法重建HL-2A等离子体边界的研究

根据Shafranov电流密度矩理论，给出了用可移动电流丝方法重建HL-2A装置等离子体边界的具体计算方法，研究了用可移动电流丝方法(VCF法)重建边界的可行性.VCF法与固定电流丝方法(FCF法)和有限电流元法(FCE法)相比，最大的优点就是用1—3个可移动电流丝就可以准确地重建位置和小半径快速变化的等离子体位形，这正好弥补了FCF法的不足.将可移动电流丝方法和FCF法相结合，可以实现全程等离子体放电的边界实时显示和等离子体的位形控制. 关键词： 可移动电流丝方法 边界识别     

三维介观超导环涡旋态的研究

通过数值求解非线性金兹堡-朗道(G-L)方程组,研究了三维介观超导环中的涡旋态。发现了在细环中只能存在巨涡旋态,以及存在顺磁、抗磁迈斯纳效应和间隙性超导现象。在粗环中,发现了多涡旋态和巨涡旋态共存的混合态。相应讨论有助于理解介观超导环中涡旋态相变。     

Numerical simulation of laminar flow past a circular cylinder

The present paper focuses on the analysis of two- and three-dimensional flow past a circular cylinder in different laminar flow regimes. In this simulation, an implicit pressure-based finite volume method is used for time-accurate computation of incompressible flow using second order accurate convective flux discretisation schemes. The computation results are validated against measurement data for mean surface pressure, skin friction coefficients, the size and strength of the recirculating wake for the steady flow regime and also for the Strouhal frequency of vortex shedding and the mean and RMS amplitude of the fluctuating aerodynamic coefficients for the unsteady periodic flow regime. The complex three dimensional flow structure of the cylinder wake is also reasonably captured by the present prediction procedure.     

Vortex core physics in the cuprate superconductor Nd2−xCexCuOy

Flux-flow voltage steps and negative differential resistivity in the cuprate Nd_2−xCe_xCuO_y are explained in terms of subbands between the Fermi energy and the energy gap affecting the quasiparticle dynamics.     

A third order dispersive flow for closed curves into almost Hermitian manifolds

We discuss a short-time existence theorem of solutions to the initial value problem for a third order dispersive flow for closed curves into a compact almost Hermitian manifold. Our equations geometrically generalize a physical model describing the motion of vortex filament. The classical energy method cannot work for this problem since the almost complex structure of the target manifold is not supposed to be parallel with respect to the Levi-Civita connection. In other words, a loss of one derivative arises from the covariant derivative of the almost complex structure. To overcome this difficulty, we introduce a bounded pseudodifferential operator acting on sections of the pullback bundle, and eliminate the loss of one derivative from the partial differential equation of the dispersive flow.     

The effect of tilt aberration and astigmatism of turbulent atmosphere on the intensity distribution of a vortex carrying Gaussian beam

The effect of tilt and astigmatism aberration of the turbulent atmosphere on the intensity distribution of a focused vortex carrying Gaussian beam was investigated based on the extended Fresnel-Kirchhoff diffraction integral and the quadratic approximation of phase structure function. Our results have shown that the intensity distribution on the focal plane in the effect of tilt aberration changes with the turbulent strength, the propagation distance and the topological charge of the initial beam. The propagation distance is larger, the focal spot size will be larger, and the central dip will be less deep. It is also noticed that the intensity distribution of a beam with single topological charge is affected more by tilt aberration in comparison to the beam with double topological charge. The effect of astigmatism on the intensity distribution is quite less than that of tilt aberration. For focused beam propagation in atmosphere, the effect of the tilt aberration on the intensity distribution of optical vortex beam is the main effect of total turbulent aberration.     

Maximizing critical currents in superconductors by optimization of normal inclusion properties

The movement of vortices in superconductors due to an applied current can induce a loss of perfect conductivity. Experimental observations show that material impurities can effectively prevent vortices from moving. In this paper, we provide numerical studies to investigate vortex pinning and critical currents through the use of an optimal control approach applied to a variant of the time-dependent Ginzburg-Landau model that can account for normal inclusions. The effects that the size and boundary of the sample and the number, size, shape, orientation, and location of the inclusion sites have on the critical current and vortex lattices are studied. In particular, the optimal control approach is used to determine the optimal properties of the impurities so as to maximize the critical current, i.e., the largest current that can pass through a superconductor without resistance.