Temperature effects on supercontinuum generation using a continuous-wave Raman fiber laser

We describe the effect of temperature variations on supercontinuum (SC) generation in optical fibers using a continuous-wave (CW) Raman fiber laser as a pump. We achieve supercontinuum generation by pumping only ∼2 W of power into a 7 km-long nonzero dispersion-shifted fiber (NZDSF) in the region of small anomalous dispersion. In these conditions, the supercontinuum builds up basically on modulational instability and Raman. At room temperature, the supercontinuum covers effectively the S, C and L transmission bands defined by the International Telecommunication Union (ITU). Temperature tuning of the fiber environment provides a means of tuning the fiber dispersion, and thus a means of changing the width and shape of the supercontinuum spectrum. We demonstrate a 27% increase in the 10-dB SC width. We believe that the application of this new tuning mechanism to other experimental configurations using pulsed sources might be used to produce extremely broad supercontinuums.     

不良导体导热系数测定实验中仪表风扇对实验结果的影响

根据对物体冷却规律的分析,并从实验结果比较,指出稳态法测不良导体导热系数实验中,设置散热盘的冷却过程应与其在稳态过程时的强迫对流散热方式保持一致.     

Thermal stability of nanoscale silver metallization in Ag/W/Co/Si(1 0 0) multilayer

In this work, we have studied thermal stability of nanoscale Ag metallization and its contact with CoSi₂ in heat-treated Ag(50 nm)/W(10 nm)/Co(10 nm)/Si(1 0 0) multilayer fabricated by sputtering method. To evaluate thermal stability of the systems, heat-treatment was performed from 300 to 900 °C in an N₂ ambient for 30 min. All the samples were analyzed by four-point-probe sheet resistance measurement (R_s), Rutherford backscattering spectrometry (RBS), X-ray diffractometry (XRD), and atomic force microscopy (AFM). Based on our data analysis, no interdiffiusion, phase formation, and R_s variation was observed up to 500 °C in which the Ag layer showed a (1 1 1) preferred crystallographic orientation with a smooth surface and R_s of about 1 Ω/□. At 600 °C, a sharp increase of R_s value was occurred due to initiation of surface agglomeration, WSi₂ formation, and interdiffusion between the layers. Using XRD spectra, CoSi₂ formed at the Co/Si interface preventing W silicide formation at 750 and 800 °C. Meantime, RBS analysis showed that in this temperature range, the W acts as a cap layer, so that we have obtained a W encapsulated Ag/CoSi₂ contact with a smooth surface. At 900 °C, the CoSi₂ layer decomposed and the layers totally mixed. Therefore, we have shown that in Ag/W/Co/Si(1 0 0) multilayer, the Ag nano-layer is thermally stable up to 500 °C, and formation of W-capped Ag/CoSi₂ contact with R_s of 2 Ω/□ has been occurred at 750-800 °C.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

Birefringent filter with amplitude beats

In this work, we show a very simple birefringent filter useful to modulate a broadband light spectrum. We first show the generation of various oscillating spectra using two identical multiple-order waveplates. In particular a sinusoidal broadband spectrum with a rapid oscillation is obtained. This spectrum is amplitude modulated by adding another waveplate to the system. This waveplate has a small phase shift, and with the proper orientation generates amplitude beats on the broadband spectrum. Finally, we show how this system can be voltage controlled by means of a ferroelectric liquid crystal modulator. We experimentally demonstrate this behavior with the aid of a portable spectrophotometer, and we provide a theoretical explanation on the basis of the Jones matrix formalism.     

二阶半线性中立型差分方程的振动性准则

考虑二阶半线性中立型差分方程给出了方程(1)的解的振动性的充分条件．所有结果推广和改进了关于中立和时滞差分方程已有结果．     

火工品可靠性试验数据的综合分析方法

升降法试验数据和固定刺激量下的成败型试验数据,是两种最常见的火工品可靠性试验数据．我们应用Markov链,研究了升降法试验数据下,感度分布参数的极大似然估计的特性．在此基础上,应用Bootstrap方法和Bayes方法,给出了综合分析两种试验数据的方法．最后,将该方法应用于520底火的可靠性鉴定,得出了有益的结论．     

Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.     

Parking Capacity and Pricing in Park'n Ride Trips: A Continuous Equilibrium Network Design Problem

In this paper we consider the problem of designing parking facilities for park'n ride trips. We present a new continuous equilibrium network design problem to decide the capacity and fare of these parking lots at a tactical level. We assume that the parking facilities have already been located and other topological decisions have already been taken.The modeling approach proposed is mathematical programming with equilibrium constraints. In the outer optimization problem, a central Authority evaluates the performance of the transport network for each network design decision. In the inner problem a multimodal traffic assignment with combined modes, formulated as a variational inequality problem, generates the share demand for modes of transportation, and for parking facilities as a function of the design variables of the parking lots. The objective is to make optimal parking investment and pricing decisions in order to minimize the total travel cost in a subnetwork of the multimodal transportation system.We present a new development in model formulation based on the use of generalized parking link cost as a design variable.The bilevel model is solved by a simulated annealing algorithm applied to the continuous and non-negative design decision variables. Numerical tests are reported in order to illustrate the use of the model, and the ability of the approach to solve applications of moderate size.