Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

α－甲基丙烯酸烯丙酯的合成及其自由基、阴离子聚合的研究

合成了α－甲基丙烯酸烯丙酯（ＡＭＡ），并对其自由基、阴离子聚合进行了探讨。结果发现，该单体难以进行选择性自由基聚合，但可用作多种单体自由基聚合的交联剂。用１，１′－二苯基己基锂在ＴＨＦ中引发ＡＭＡ，可顺利地进行α位双键的选择性阴离子聚合，分子量实测值与计算值基本一致。在较低温度下（≤－６０℃），可得窄分布ＰＡＭＡ（Ｍｗ／Ｍｎ＝１．１２～１．１５）。随聚合温度升高，间同和无规聚合物含量分别呈下降和上升趋势。ＧＰＣ、１ＨＮＭＲ及ＦＴＩＲ鉴定表明，用阴离子聚合法可得到溶于多种溶剂、每个重复单元上均定量带有烯丙基双键的窄分布官能性ＰＡＭＡ。     

Measurement of rheological properties of corn stover suspensions

Corn stover is currently being evaluated as a feedstock for ethanol production. The corn stover suspensions fed to reactors typically range between 10 and 40% solids. To simulate and design bioreactors for processing highly loaded corn stover suspensions, the rheologic properties of the suspension must be measured. In systems with suspended solids, rheologic measurements are difficult to perform owing to settling in the measurement devices. In this study, viscosities of corn stover suspensions were measured using a helical ribbon impeller viscometer. A calibration procedure is required for the impeller method in order to obtain the shear rate constant, k, which is dependent on the geometry of the measurement system. The corn stover suspensions are described using a power law flow model.     

Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

Analysis of long-term distributions of calibration parameters and calibration intervals for an atomic absorption spectrophotometer

 A combination of "black box" and "calendar-time" methods for the determination of calibration intervals of an analytical measuring instrument is discussed. Since the methods require information on the distributions of the calibration parameters, such information is described for an atomic absorption spectrophotometer, as an example. The hypotheses on the normal distribution of the calibration parameters are tested using the ω²-criterion and accepted at 0.90–0.95 levels of confidence. Corresponding control charts are designed for indication of warning and action limits of the calibration parameters, and diagnoses of outliers in further calibrations. Control charts indicate also when the calibration should be done according to the full program of the equipment manufacturer. Received: 15 April 2000 / Accepted: 24 July 2000     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

反应条件对煤加氢热解产物分布的影响

本文以内蒙古红庙煤为研究对象，在温度４５０－６５０℃和氢氯压力２－５ＭＰＡ的范围内，在加压固定床反应器上考察了各种因素包括传质作用对煤加氢热解产物分布的影响。研究表明，转化率和焦油收率随最终反应温度，氢气压力和流速的升高而升高，随加速速率的增大而降低。     

THE CORRELATION EFFECT ON THE CHAIN MOTION CONTRIBUTION TO IONIC TRANSPORT IN POLYMER ELECTROLYTES

The ionic transport process in polymer electrolytes (such as polyethylene oxide) wassimulated numerically on a two dimensional square lattice where charge carriers areaccommodated by the lattice sites connected randomly with available bonds to represent theamorphous chain configuration. Following the dynamic bond percolation theory(DBPT),the chainmotion contribution to the ionic conduction was incorporated via periodical renewal of the randombond configuration. To check and extend the prediction made by DBPT employing global abruptbond renewal,spatial correlation of the bond reassignment was introduced to the system by: 1)regional bond renewal and 2) organized bond motion. It is found that the difference between thediffusivities simulated involving regional bond renewal and those of DBPT becomes negligiblewhen the bond renewal rate approaches the carrier hopping rate.     

Polarographic Behaviour and Determination of Kinetic Parameters of Lead-Pamoate Complex in Dimethyl Sulfoxide

The polarography of lead ion in dimethyl sulfoxide (DMSO) was investigated in the DMSO concentration range 0–80 vol.%. The complex species identified were Pb₂(DMSO)⁴⁺₃, Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₆ in [DMSO]<10 vol.%, 10< [DMSO]<43 vol.% and [DMSO]>43 vol.%, respectively. In the presence of pamoic acid, the reduction of lead ion in DMSO was two-electron reversible diffusion-controlled at pH≤6.0, but it became irreversible at pH>6.0. The complex species identified was Pb(D_m)₂(P_m)₃(OH)^6? at pH>6.0. The rate constants of electro-reduction and electro-oxidation, activation energies were determined. The hydrolysis constants of lead ion in dimethyl sulfoxide concentration 40–70 vol.% at pH 4.5–6.0 were found to be of the order of 10^?6. The stability constants of the Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₀ were also determined to be of the orders of 10¹ and 10⁵, respectively.