Immunosensor for estrone with an equal limit of detection as common analytical methods

Immunoanalytical methods at a very low limit of detection (LOD) and a low limit of quantification (LOQ) are becoming more and more important for environmental analysis and especially for monitoring drinking water quality. Biosensors have suitable characteristics such as efficiency in allowing very fast, sensitive, and cost-effective detection. Here we describe a fully automated immunoassay for estrone with a LOD below 0.20 ng L^–1 and a LOQ below 1.40 ng L^–1. In contrast to common analytical methods such as GC-MS or HPLC-MS, the biosensor used requires no sample pre-treatment and pre-concentration. The basis of our sensitive assay is the antibody with a high affinity constant towards estrone. The very low amount of antibody per sample results in low validation parameters (LOD, LOQ, and IC50), but this assay for estrone represents the current device-related limitation of the River Analyser (RIANA).     

泥炭中全氮的测定

采用连续流动化学分析仪（Continuous Flow Analyzer,CFA）,对泥炭中的全氮进行分析.方法有良好的线性关系（r=0.9999）,回收率为99％-105％,测试速度是比色法测试速度的15-20倍,操作简便、准确度好,对氮化学研究有一定意义.     

2D Burgers equation with large Reynolds number using POD/DEIM and calibration

Model order reduction of the two‐dimensional Burgers equation is investigated. The mathematical formulation of POD/discrete empirical interpolation method (DEIM)‐reduced order model (ROM) is derived based on the Galerkin projection and DEIM from the existing high fidelity‐implicit finite‐difference full model. For validation, we numerically compared the POD ROM, POD/DEIM, and the full model in two cases of Re = 100 and Re = 1000, respectively. We found that the POD/DEIM ROM leads to a speed‐up of CPU time by a factor of O(10). The computational stability of POD/DEIM ROM is maintained by means of a careful selection of POD modes and the DEIM interpolation points. The solution of POD/DEIM in the case of Re = 1000 has an accuracy with error O(10^?3) versus O(10^?4) in the case of Re = 100 when compared with the high fidelity model. For this turbulent flow, a closure model consisting of a Tikhonov regularization is carried out in order to recover the missing information and is developed to account for the small‐scale dissipation effect of the truncated POD modes. It is shown that the computational results of this calibrated ROM exhibit considerable agreement with the high fidelity model, which implies the efficiency of the closure model used. Copyright © 2016 John Wiley & Sons, Ltd.     

Total Synthesis of (±)-Isocembrene: A Tactic for Both Diene Construction and Macrocycle Formation

Abstract

The total synthesis of (±)-isocembrene 1, a naturally occurring cembrene diterpenoid, has been achieved via a unified, convergent and highly efficient strategy by imploying an intramolecular Stille sp²–sp² macrocyclization as the key step and it presents an ideal opportunity to extend the effectiveness of the tactic for both 1,3-diene construction and macrocycle formation.     

First total synthesis of isoquinolinone alkaloid marinamide and its methyl ester

The first total synthesis of isoquinolinone alkaloid marinamide 1 and its methyl ester 2 was described. The key steps involved a regioselective Frieclel-Crafts reaction of 1-benzyl-1H-pyrrole to form the intermediate 8.     

Conductivity as a Sensor for Monitoring Relative Magnesium Corrosion Rates in Real‐time,in Serum‐containing Media under Cell Culture Conditions

Because controlling the corrosion rate of magnesium metal will be crucial to the success of biomedical implants containing pure magnesium or magnesium alloys, many ways have been sought to improve in vitro tests to analyze corrosion rates, and also to identify new methods of preparing or post‐processing magnesium. In this work, for an in vitro assay, we explored the use of a commercially available conductivity sensor to study magnesium corrosion under cell culture conditions that duplicate many physiologically appropriate parameters. With this sensor, we studied the corrosion of two previously untested magnesium single crystal samples that differed in surface treatments that could alter corrosion rates. The results show that the relative conductivity changes in (mS/cm) over the total time of immersion were proportional to the corrosion rates in (mm/y) and also to the total magnesium released, as detected by inductively coupled plasma mass spectrometry (ICP‐MS).     

On the rate of change of the sharp constant in the Sobolev–Poincaré inequality

The rate of change of the sharp constant in the Sobolev–Poincaré or Friedrichs inequality is estimated for a Euclidean domain that moves outward. The key ingredients are a Hadamard variation formula and an inequality that reverses the usual Hölder inequality.     

Sedimentary process inferences from Humic substances analysis and deposition rates (Western Ross Sea,Antarctica)

The first 40?cm of sediment of three basins in the Ross Sea were sampled using a box corer. Site Y1 was located close to the coast in Terra Nova Bay; the sediment of site Y3 was collected in a more distal basin in the central sector of the Ross Sea; finally site Y5 was sampled in the deepest zone of the Joides Basin.

Sediment cores were sliced and analysed with a depth resolution of 2–4.5?cm. The distribution of humic substances and their structural features along the cores were determined and related to the pattern of Total Organic Carbon (TOC) and sedimentological data. The grain size distribution and the ²¹⁰Pb inventories allow the sediment of the study sites to be characterised.

The humic substance content in the sediment decreases, with a change in slope between 23 and 26?cm at Y1, between 12 and 15?cm at Y3 and constant values with further depth. At Y5 the depth profile of humic substance content shows constant values in the upper 17?cm and values decrease with further depth. The pattern of humic substance yield is similar to that found for TOC. The analysis of the elemental composition of the humic acids extracted from different sediment depths shows an increasing C/N atomic ratio at sites Y1 and Y3 and constant values along the Y5 core. The depth profile of the C/N atomic ratio is confirmed by the changes observed in the structural characterisation and indicates a shift from the freshly deposited organic matter on the sediment surface to more humified material (humin). The results obtained highlight a different sedimentation rate at the three sites as deduced from sedimentological analysis.     

The Calculus of Moving Surfaces and Laplace Eigenvalues on an Ellipse with Low Eccentricity

Our goal is to demonstrate the utility of the calculus of moving surfaces (CMS) in boundary variation problems. We discuss the relative advantages of the CMS compared to the alternative approach of interior variations. We illustrate the technique by calculating the two leading terms of a power series for the Laplace eigenvalues on an ellipse with semi-axes 1 + a and 1 + b, where a and b are small. We compare the CMS estimates with those obtained by the conventional finite element method with Richardson extrapolation. The comparison confirms the cubic rate of convergence for the CMS estimates.