具有生产性与福利性公共支出的随机内生增长模型

文章建立一个随机内生增长模型来阐明主要政策参数对经济增长与社会福利的影响.若对生产函数、效用函数、偏好及随机干扰作一些特殊的假设,我们证明了主要政策参数的均衡值能被模型参数唯一决定.进一步我们还得到了期望增长率与储蓄的清晰解.文章的最后,我们证明了政府支出直接影响个体决策者的决策:即提高经济增长率将减少福利;反之,增加福利将减少增长率.     

产品销售相关环境下的提成率研究

以往多产品销售的最优提成率研究多基于多产品销售相互独立的假设之上。本文将一种多产品销售的合同模型拓展到产品销售相互影响的环境中,对不同的销售相关性情况下销售提成率的设置进行了分析,推出了不同情况下各产品提成率之间的关系特点和指导性结论。最后研究了当厂商兼顾短期利润和长期利润时对主副产品销售提成率的影响,提出了根据产品所处生命周期的不同阶段,用价值权重向量来动态调整、优化负责销售主、副产品的销售人员薪酬合同参数设计的方法。     

单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.     

抽样调查中最佳测量次数的确定

现场抽样调查中，由于测量误差的存在，使得所测变量实测值的方差增大，通过增加每个体的测量次数可以控制测量误差，但这样每个体调查费用增大。本文对测量信度Ｒ，每个体测量次数ｍ与相应所需的样本含量ｎｍ、调查费用Ｔｎ的关系进行了探讨，并介绍了如何根据Ｒ，及每个体测量费用占其总费用构成比Ｃ，确定最佳测量次数ｍ值，以达到最佳控制调查费用的目的，这对我们在大型现场调查中进行经济效益分析具有重大的理论指导意义。     

Deposition of boron nitride on graphite at 1300 K

A method for the deposition of BN onto graphite and other substrates is described. Boron trichloride (BCl₃) and ammonia (NH₃) diluted with Ar were used as reacting gases. The deposition process was carried out at 1300 K as well as lower temperatures in an open system at pressures of 1 atm. The consequences of the introduction of hydrogen to the system were considered. It was demonstrated that the replacement of argon with hydrogen increases the efficiency of the process as well as the theoretical rate of BN deposition. However, the acceleration of the deposition seems to be unprofitable, because the resulting supersaturation leads to the formation of an amorphous phase. The modification of the experimental conditions were proposed.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Optimal control problems with applications to the elimination of substrate diffusing and convecting through immobilized enzyme

Some optimization problems concerning a substrate in a fluid are considered. The concentration of the substrate is affected by diffusion, convection, and elimination by enzymes, and the problem is to find the optimal distribution of enzymes. In this paper, the rate of elimination and the transmission coefficient are optimized. Mathematically, these problems are optimal control problems, and they are analyzed by means of Pontryagin's maximum principle.     

Some remarks on the Jensen-Hadamard inequalities and applications

We provide some inequalities and integral inequalities connected to the Jensen-Hadamard inequalities for convex functions. In particular, we give some refinements to these inequalities. Some natural applications and further extensions are given.

---

Sunto Forniamo alcune diseguaglianze e diseguaglianze integrali connesse alle dise-gueglianze di Jensen-Hadamard per funzioni convesse. In particolare, diamo qualche miglioramento di queste diseguaglianze. Alcune applicazioni naturali ed ulteriori estensioni sono date.

     

A floating-point genetic algorithm for solving the unit commitment problem

This paper proposes a floating-point genetic algorithm (FPGA) to solve the unit commitment problem (UCP). Based on the characteristics of typical load demand, a floating-point chromosome representation and an encoding–decoding scheme are designed to reduce the complexities in handling the minimum up/down time limits. Strategic parameters of the FPGA are characterized in detail, i.e., the evaluation function and its constraints, population size, operation styles of selection, crossover operation and probability, mutation operation and probability. A dynamic combination scheme of genetic operators is formulated to explore and exploit the FPGA in the non-convex solution space and multimodal objective function. Experiment results show that the FPGA is a more effective technique among the various styles of genetic algorithms, which can be applied to the practical scheduling tasks in utility power systems.