Nonlinearity of muscle stiffness

In this letter, a comparison between three types (two linear and one nonlinear) of models of skeletal muscle stiffness is shown. Results are compared with experimental data for biceps brachii in the case of muscle stretching and with the Hill equation for a biological muscle. It is shown that results for nonlinear stiffness model in case of length-force relationship fits to the experimental data.     

Ultra-High Performance Liquid Chromatography with Electrospray Ionization Tandem Mass Spectrometry for the Determination of Caffeine in Energy Drinks

A simple and highly sensitive method for the determination of caffeine in energy beverages was developed and validated. Sample preparation utilizing solid-phase extraction (SPE) was simple and reliable. Separation by isocratic ultra-high performance liquid chromatography (UPLC) with a reversed-phase C₁₈ column was performed within 6 min. The use of SPE with UPLC coupled with electrospray ionization-multiple tandem mass spectrometry detection (ESI-MSⁿ) was accurate, reproducible, and validated for the determination of caffeine in energy drink matrices. The limit of quantification for caffeine was approximately 2.1 ng mL^?1. The intra-day and inter-day precisions were less than 4%, and the accuracy of the measurements was between 85.1% and 93.2%. Results for caffeine concentrations in eighteen beverages were compared to the values on the labels. This paper describes the first use of the UPLC–ESI-ion trap MSⁿ technique for quality-control purposes of caffeine present in energy drinks.     

A thermodynamic and dynamic subgrid closure model for two‐material cells

A general and robust subgrid closure model for two‐material cells is proposed. The conservative quantities of the entire cell are apportioned between two materials, and then, pressure and velocity are fully or partially equilibrated by modeling subgrid wave interactions. An unconditionally stable and entropy‐satisfying solution of the processes has been successfully found. The solution is valid for arbitrary level of relaxation. The model is numerically designed with care for general materials and is computationally efficient without recourse to subgrid iterations or subcycling in time. The model is implemented and tested in the Lagrange‐remap framework. Two interesting results are observed in 1D tests. First, on the basis of the closure model without any pressure and velocity relaxation, a material interface can be resolved without creating numerical oscillations and/or large nonphysical jumps in the problem of the modified Sod shock tube. Second, the overheating problem seen near the wall surface can be solved by the present entropy‐satisfying closure model. The generality, robustness, and efficiency of the model make it useful in principle in algorithms, such as ALE methods, volume of fluid methods, and even some mixture models, for compressible two‐phase flow computations. Copyright © 2013 John Wiley & Sons, Ltd.     

A two dimensional Euler–Lagrangian model of wood gasification in a charcoal bed—Part II: Parameter influence and comparison

A Euler–Lagrangian simulation was employed for a comprehensive parameter study of wood gasification in a fluidized charcoal bed. The parameters that were varied include the initial bed temperature, fuel mass flow rate, inert tar fraction, and kinetic energy losses caused by particle–particle and particle–wall collisions. The results of each parameter variation are compared with a base scenario, previously described in detail in Part I of this study (Gerber & Oevermann, 2014). The results are interpreted by comparing the reactor outlet temperature, averaged particle temperature, overall wood mass, overall charcoal mass, concentrations of several gaseous species, and axial barycenter data for particles obtained with different sets of parameters. The inert tar fraction and fuel mass flow rate are the most sensitive parameter, while the particle–particle and particle–wall contact parameters have only a small impact on the results. Increasing the reactive tar components by 19% almost doubled the amount of reactive tars at the reactor outlet, while decreasing the restitution coefficients of the particle collisions by 0.2 results in higher overall gas production but almost no change in bed height. Herein, our numerical results are discussed in detail while assessing the model restrictions.     

Continuous segregation of binary heterogeneous solids in a fast-fluidized bed

Continuous segregation of binary heterogeneous solids (different density mixtures) is carried out in a gas–solid fluidized bed to study the effects of gas velocity, solids feed rate, feed composition and density difference of solids on the separation factor (recovery of flotsam at top outlet) and the quality of the product (purity of flotsam at top outlet) in a continuous fast-fluidized bed. The holdup of the bed material is obtained in each experimental run. It is observed that the separation factor decreases with increase in solids feed rate or density difference of solids, and increases with gas velocity or proportion of flotsam in the feed. The quality of the product decreases with increase in gas velocity or solids flow rate, and increases with feed composition or density difference of solids. The experimental results show that the separation factor and the quality of the product are more sensitive to gas velocity than to other operating parameters. Empirical correlations for predicting the separation factor and quality of the product are proposed based on the Richards model for individual flotsam mass fraction in the feed, and the predictions agree satisfactorily with the present experimental data.     

A simultaneous canonical form of a pair of matrices and applications involving the weighted Moore–Penrose inverse

In this paper, a simultaneous canonical form of a pair of rectangular complex matrices is developed. Using this new tool we give a necessary and sufficient condition to assure that the reverse order law is valid for the weighted Moore–Penrose inverse. Additionally, we characterize matrices ordered by the weighted star partial order and adjacent matrices as applications.     

Convenient In-Flow Preparation of Cr(II) Chloride for Nozaki–Hiyama–Kishi Reaction

A flow preparation of chromous chloride has been introduced as a viable alternative to the batch protocol. Activity of the prepared reagent has been demonstrated in the traditional Nozaki–Hiyama–Kishi reaction.     

Do some chemotaxis-growth models possess Lyapunov functionals?

In spirit of a result by W. Alt from 1980 we give some sufficient criteria that guarantee the existence of Lyapunov functionals for parabolic cross-diffusion models including chemotaxis-growth models with non-diffusive chemotactic signals (resp. with non-diffusive memory).     

Projective Reed–Muller type codes on rational normal scrolls

In this paper we study an instance of projective Reed–Muller type codes, i.e., codes obtained by the evaluation of homogeneous polynomials of a fixed degree in the points of a projective variety. In our case the variety is an important example of a determinantal variety, namely the projective surface known as rational normal scroll, defined over a finite field, which is the basic underlining algebraic structure of this work. We determine the dimension and a lower bound for the minimum distance of the codes, and in many cases we also find the exact value of the minimum distance. To obtain the results we use some methods from Gröbner bases theory.     

Bayesian Estimation for the Order of INAR(q) Mo del

In this paper, we consider the problem of determining the order of INAR(q) model on the basis of the Bayesian estimation theory. The Bayesian es-timator for the order is given with respect to a squared-error loss function. The consistency of the estimator is discussed. The results of a simulation study for the estimation method are presented.