{(MesGa)3[GaP(H)Mes](PMes)4}, Ein phosphorsubstituiertes Ga?P-Heterocuban

{(MesGa)₃[GaP(H)Mes](PMes)₄}, a Phosphorus-substituted Ga? P-Heterocubane A mixture of MesGaCl₂/GaCl₃ (ratio 3:1) reacts with 5 equivalents of MesPLi₂ in THF at ?78°C to the title compound {(MesGa)₃[GaP(H)Mes](PMes)₄} ( 1 ) by use of the “dilution principle”. 1 can be obtained in 30% yield. Recrystallization of 1 from DME and toluene, respectively, gives 1 · 0.5 DME and 1 · toluene. 1 was characterized by NMR-, IR-, and MS-techniques. According to the X-ray structure determination of 1 · toluene, 1 has a heterocubane structure, one corner of which is substituted with an P(H)Mes group.     

Cellulose production based on hemicellulose hydrolysate from steam-pretreated willow

The production cost of cellulolytic enzymes is a major contributor to the high cost of ethanol production from lignocellulosics using enzymatic hydrolysis. The aim of the present study was to investigate the cellulolytic enzyme production ofTrichoderma reesei Rut C 30, which is known as a good cellulase secreting micro-organism, using willow as the carbon source. The willow, which is a fast-growing energy crop in Sweden, was impregnated with 1–4% SO₂ and steam-pretreated for 5 min at 206°C. The pretreated willow was washed and the wash water, which contains several soluble sugars from the hemicellulose, was supplemented with fibrous pretreated willow and used for enzyme production. In addition to sugars, the liquid contains degradation products such as acetic acid, furfural, and 5-hydroxy-methylfurfural, which are inhibitory for microorganisms. The results showed that 50% of the cellulose can be replaced with sugars from the wash water. The highest enzyme activity, 1.79 FPU/mL and yield, 133 FPU/g carbohydrate, was obtained at pH 6.0 using 20 g/L carbon source concentration. At lower pHs, a total lack of growth and enzyme production was observed, which probably could be explained by furfural inhibition.     

Synthesis of a biotinated amphiphile

The synthesis of a biotinated amphiphile assembled from d-(+)-biotin, ethylene diamine as spacer, galactaric acid and 1-dodecylamine was achieved in six steps. The key step was the synthesis of a bisacetonide protected galactaric ester, the structure of which was determined by X-ray analysis. Aminolysis, spacer attachment, coupling with biotin and deprotection led to the amphiphilic galactaramide.     

Total synthesis of d-(+)-biotin

A total synthesis of d-(+)-biotin is described starting from d-(+)-glucosamine using acyliminium chemistry.     

New alcohol resistant strains ofSaccharomyces cerevisiae species for potable alcohol production using molasse

Two alcohol resistant strains of Saccharomyces cerevisiae species were isolated from a Greek vineyard plantation. The strain AXAZ-1 gave a concentration of 17.6% v/v alcohol and AXAZ-2 16.5%, when musts from raisin and sultana grapes, respectively, were employed in alcoholic fermentations. They were found to be more alcohol tolerant and fermentative in the fermentation of molasse than the traditional baker's yeast. Specifically, using an initial [symbol: see text] Be density of 16 [symbol: see text] Be at the repeated batch fermentation process, in the first as well as fourth batch, the better AXAZ-1 gave final [symbol: see text] Be densities of 6.0 and 10.5 respectively, and the baker's yeast 11.6 and 14.5.     

Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

A density functional study on a biomimetic non-heme iron catalyst: insights into alkane hydroxylation by a formally HO-FeV=O oxidant

The reactivity of [HO-(tpa)Fe(V)=O] (TPA=tris(2-pyridylmethyl)amine), derived from O-O bond heterolysis of its [H(2)O-(tpa)Fe(III)-OOH] precursor, was explored by means of hybrid density functional theory. The mechanism for alkane hydroxylation by the high-valent iron-oxo species invoked as an intermediate in Fe(tpa)/H(2)O(2) catalysis was investigated. Hydroxylation of methane and propane by HO-Fe(V)=O was studied by following the rebound mechanism associated with the heme center of cytochrome P450, and it is demonstrated that this species is capable of stereospecific alkane hydroxylation. The mechanism proposed for alkane hydroxylation by HO-Fe(V)=O accounts for the experimentally observed incorporation of solvent water into the products. An investigation of the possible hydroxylation of acetonitrile (i.e., the solvent used in the experiments) shows that the activation energy for hydrogen-atom abstraction by HO-Fe(V)=O is rather high and, in fact, rather similar to that of methane, despite the similarity of the H-CH(2)CN bond strength to that of the secondary C-H bond in propane. This result indicates that the kinetics of hydrogen-atom abstraction are strongly affected by the cyano group and rationalizes the lack of experimental evidence for solvent hydroxylation in competition with that of substrates such as cyclohexane.     

Gauge parameters for extrapolation of oscillator strengths ofE1 transitions along the boron isoelectronic sequence

The oscillator strengthsf forE1 transitions along an isoelectronic sequence can be written asf=aK ²+bK+c whereK is a gauge parameter representing the gauge condition of the electromagnetic field. The coefficientsa,b, andc are functions of length (f _l) and velocity (f _v) values of the oscillator strengths at the Hartree-Fock level. We have shown by making a perturbation expansion of oscillator strengthsf,f _l andf _v that the gauge parameterK is independent of the nuclear charge. This property has been exploited to extrapolatef values along the isoelectronic sequence of Boron for some representativeE1 transitions within then=2 complex. We obtain good agreement between the extrapolated results with the configuration interaction results.     

First preparative synthesis of a 3-acetamido-3,6-dideoxy-d-galactopyranose glycosyl donor via intramolecular cyclization of an epoxytrichloroacetimidate

The preparative synthesis of a 3-acetamido-3,6-dideoxy-d-galactopyranose N-phenyl-trifluoroacetimidate donor has been accomplished using as key step a silica gel mediated cyclization of an epoxytrichloroacetimidate, while other more conventional routes to aminosugars failed. Test glycosylations with the N-phenyl-trifluoroacetimidate donor are also reported.     

Tensor polarizabilities of the 4f 7(8 S)5d6s 2 9 D 2,3,4,5,6 levels in Gd I

The optical pumping method with rf detection and the nonlinear level crossing technique were used in parallel electric and magnetic fields to investigate the Stark splitting of all the fine structure levels of the ground multiplet 4f ⁷ (⁸ S) 5d6s ^{2 9} D in Gd I. The tensor polarizabilities were deduced from the level crossing and the rf signals. The variation of the tensor polarizabilities is well reproduced by the LS coupling approximation, except for the small value of the⁹ D ₅ level. A value of the tensor polarizability of the 5d electron is evaluated from the experimental results, ₂(5d)=2.00(6) kHz(kV/cm)². It is shown that the ratio between the electric quadrupole constant and the tensor polarizability is constant, except for the⁹ D ₅ ratio, which is caused by a breakdown of the central field model.