Determination of fungicide residues in fruits by coupled-column liquid chromatography

Coupled-column liquid chromatography with fluorescence detection was applied to the determination of o-phenylphenol and bitertanol residues in orange and banana fruits. After extraction with a mixture of acetone, dichloromethane-petroleum ether, and ethyl acetate, an extract aliquot of 100 microL was injected directly without any additional clean-up into the chromatographic system using two reversed phase C18 coupled columns. The LC-LC approach allowed automated sample clean up of the vegetal extracts, leading to a simple and rapid analytical procedure, with limits of quantification between 0.01 and 0.05 mg kg(-1). Recovery experiments performed on orange and banana samples fortified at different concentrations (0.01 - 4 mg kg(-1)) gave average recoveries between 70 and 113% with relative standard deviations lower than 15%. The procedure developed was finally applied to orange and banana samples from different geographical locations and the results were confirmed by GC-MS.     

Flow injection on-line ultrasound-assisted extraction of iron in meat samples coupled to a flame atomic absorption spectrometric system

Iron was extracted on-line from solid meat samples by a simple and rapid continuous ultrasound-assisted extraction system (CUES). The CUES is connected to a flow injection manifold, which allows the on-line flame atomic absorption spectrometric determination of iron. A Plakett–Burman design was used for the optimisation of the CUES. The method achieved a total sampling frequency of 11 samples per hour with a relative standard deviation for the complete procedure of 0.4%. The detection limit was 0.6 g g^–1 (dry mass) for a sample amount of 30 mg. Accurate results were obtained by measuring the certified reference materials BCR-186 (pig kidney) and BCR-184 (bovine muscle). The analytical procedure was applied to different real meat samples with satisfactory results.     

Density Functional Theory Study on the Adsorption of Dioxygen on Small Pt-Pd Clusters

1 INTRODUCTION The bimetallic nanoclusters are of standing inte- rest since they can exhibit catalytic, electronic and optical properties distinct from those of corre- sponding pure nanoclusters[1～4]. Palladium and pla- tinum, well known for their catalytic properties, are often used as the catalyst in different fuel cells[5～8]. Several experimental results illustrate that for the oxygen reduction reaction (ORR), which is one of the primary reactions taking place in many fuel cells and…     

Paracrystalline order in polymers

Summary A brief review of one and three dimensional models of paracrystalline superstructures in polymers, as used for analysing the small angle scattering, is given.

---

Zusammenfassung Es wird ein knapper überblick über die bei der Analyse der Kleinwinkelstreuung von Polymeren verwendeten einund dreidimensionalen Modelle der Überstruktur gegeben.

     

Isolation of new quinidine metabolites and simultaneous determination of quinidine and its metabolites in blood and urine by direct injection HPLC analysis

Summary New quinidine metabolites, including 10,11-dihydrodiol quinidine N-oxide, 10,11-dihydrodiol quinidine and their glucuronides, were found in human urine. A quinidine monitoring HPLC method including these metabolites, is proposed by the direct injection of body fluid samples onto the precolumn for deproteinization followed by reverse phase separation in the analytical column with a column switching technique. The recovery of spiked quinidine and its metabolites in plasma was quantitative (98–102%) with good reproducibility (C.V.: 1.6–4.0%). Several clinical samples such as whole blood and urine were analyzed by the present method.     

Sample preparation in analysis of pharmaceuticals

Sample preparation is a very important and essential step in environmental analysis. This article presents an overview of extraction methods for environmental samples, focusing especially on pharmaceuticals as there is great concern about them as pollutants.     

倒数示波计时电位法在合金样品测定中的应用

应用倒数示波计时电位法，在含有吸附络合物的溶液中，采用桂汞电极作为极化电极，测定了Ｃｕ＾２＋、Ｎｉ＾２＋、Ｃｄ＾２＋、Ｐｂ＾２＋等几种金属离子的检测下限，并通过沿（ｄＥ／ｄｔ）－１￣Ｅ曲线上的峰高对合金样品进行定量分析，得到满意结果。实现了示波分析由常量到微量的飞跃。     

Substoichiometric isotope dilution determination of manganese in biological smples using 2-thenoyltrifluoroacetone in isobutyl methyl ketone

A substoichiometric isotope dilution method was developed for the determination of microgram amounts of manganese. The method involves the use of carrier-free ⁵⁴Mn with Mn(II) carrier and its complexation with 2-thenoyltrifluoroacetone (TTA) at pH 8.5, the complex then being extracted into isobutyl methyl ketone. A minimum of 50 ng of manganese can be determined. The method was applied to the determination of manganese in several standard reference materials and biological samples such as tea leaves, spices and condiments. The method is simple and fast and yields results with high accuracy and precision.     

Investigation of the luminescent properties of terbium-anthranilate complexes and application to the determination of anthranilic acid derivatives in aqueous solutions

The luminescent properties of terbium complexes with furosemide (FR), flufenamic (FF) acid, tolfenamic (TF) acid and mefenamic (MF) acid have been investigated in aqueous solutions. For all four compounds, complexation occurs when the carboxylic acid of the aminobenzoic group is dissociated and is greatly favoured in the presence of trioctylphosphine oxide as co-ligand and Triton X-100 as surfactant. Under optimum conditions, luminescence of the lanthanide ion is efficiently sensitised and the lifetime of the resonance level of terbium in the complex is ranging between 1 and 1.9 ms, against 0.4 ms for the aqua ion. The sensitivity of the method for the determination of anthranilic acid derivatives is improved by one to two orders of magnitude with respect to that achieved using native fluorescence or terbium-sensitised luminescence in methanol. The limits of detection are 2×10⁻¹⁰, 5×10⁻¹⁰ and 2×10⁻⁹ mol l⁻¹ for flufenamic acid, furosemide and tolfenamic acid, and mefenamic acid, respectively, with within-run RSD values of less than 1%. The method has been applied to the determination of flufenamic acid in spiked calf sera with and without sample pretreatment. Depending on the method and the analyte concentration, the recovery was ranging between 83 and 113% and the lowest concentration attainable in serum samples was close to 1×10⁻⁷ mol l⁻¹.     

Determination of organochlorine pesticides by gas chromatography with solid-phase microextraction

Summary A study of different extraction techniques for the determination of a selected group of organochlorine compounds in surface waters is presented. Comparison of liquid-liquid extraction (LLE) with solid-phase extraction (SPE) and solid-phase microextraction (SPME) with fibers of different polarity shows that SPME with a recently commercialised fiber of polydimethylsiloxane divinylbenzene allows these compounds to be determined in surface waters with good extraction efficiencies. Extraction time, effect of temperature, ionic strength and pH were optimised, allowing quantification in agricultural effluents in the range 1.0–60 ng·L⁻¹.