Role of nickel and manganese in recovery of resistivity in iron-based alloys after low-temperature proton irradiation

This study investigates the recovery of electric resistivity in pure iron, Fe–0.6Ni and Fe–1.5Mn as related to isochronal annealing following 1 MeV proton irradiation at lower temperature than 70 K, focusing on the relationship between solute atoms and irradiation defects. Both nickel and manganese prevent stage I_D recovery, which corresponds to correlated recombination. Stage II recovery is also changed by the addition of a solute, which corresponds to the migration of small interstitial clusters. In both pure iron and Fe–0.6Ni, no evident difference was observed in the stage III region, which corresponds to the migration of vacancies. In contrast, two substages appeared in the Fe–1.5Mn at a higher temperature than stage III_B appeared in pure iron. These substages are considered to represent the release of irradiation-induced defects, which was trapped by manganese.     

Poly‐ε‐Lysine Modified Nanocarbon Film Electrodes for LPS Detection

We developed an electrochemical system for detecting lipopolysaccharide (LPS) that uses an ultraflat nanocarbon film electrode modified with poly‐ε‐lysine with a high affinity to LPS. LPS was captured on the modified electrode, and then ferrocene labeled polymyxin B (FcPMB) was captured on the LPS adsorbed electrode via the LPS‐PMB affinity interaction. The adsorbed FcPMB provided an amplified response with Fe²⁺ ions, and the current response was dependent on the amount of captured LPS (LOD=2.0 ng/mL). This was due to the efficient accumulation of the obtained current for LPS and the very low noise made possible by the ultraflat surface.     

基于钴离子介导信号转换的抗坏血酸比色分析

抗坏血酸是许多生化过程所必需的一种生物小分子。借助于羟基氧化钴纳米片的氧化性和钴离子与硫氰酸根离子之间强的螯合作用,本研究首次报道了一种基于钴离子信号转换的新方法用于抗坏血酸的比色分析。在抗坏血酸存在时,羟基氧化钴纳米片被还原降解产生二价钴离子,钴离子与硫氰酸根离子之间通过螯合作用生成蓝色的[Co(NCS)₄]^_2-阴离子络合物,在625 nm处产生可见吸收信号。实验首先对羟基氧化钴纳米片与抗坏血酸的反应时间、硫氰酸铵和吐温-80的加入量等实验参数进行了优化,当反应时间为5 min,硫氰酸铵(3 mol/L)和吐温-80(10%, w%)的加入体积分别为30 μL和80 μL时,检测体产生最强的吸收信号。在优化的条件下,随着抗坏血酸浓度的增加,检测体系在625 nm处的吸收值线性增强,在0.03～0.45 mmol/L浓度范围内,检测体系在625 nm处的吸收值与AA浓度呈良好的线性关系,线性方程为A₆₂₅=0.638C (mmol/L)+0.042,相关系数R=0.993,检测限(3S/N)为1.5 μmol/L。     

Fluorescence Signal Amplification Strategies Based on DNA Nanotechnology for miRNA Detection

In this review,the most recent progresses in the field of fluorescence signal amplification strategies based on DNA nanotechnology for miRNA are summarized.The types of signal amplification are given and the principles of amplification strategies are explained,including rolling circle amplification(RCA),catalytic hairpin assembly(CHA),hybridization chain reaction(HCR)and DNA walker.Subsequently,the application of these signal amplification methods in biosensing and bioimaging are covered and described.Finally,the challenges and the outlook of fluorescence signal amplification methods for miRNA detection are briefly commented.     

Demystifying terms for understanding bioelectrochemical systems towards sustainable wastewater treatment

Bioelectrochemical systems (BESs) have been intensively studied in the past decade, but precise understanding of BESs performance is hindered by unclear definition of several key parameters. Herein, we analyze and discuss three sets of terms about conversion efficiency, energy performance, and pilot scale. It is suggested that ‘Coulombic recovery’ can avoid the misleading results because of different organic removals, compared with ‘Coulombic efficiency.’ Power density is not a suitable term to describe energy performance of BESs, and energy production/consumption should be reported in the energy unit such as kWh. Pilot-scale BESs should meet several criteria, including hydraulic capacity, use of actual wastewater, non-laboratory condition, and long-term operation. Proper use of those terms is strongly encouraged and will be critically important to BESs research and development.     

Nanostructures of noble metals as functional materials in biosensors

Recent advancement in nanoscience and nanotechnologies inspired a wide spectrum of uses of nanodimensional materials ranging from industrial sector to biomedical applications. Inorganic nanomaterials made of noble metals, which are corrosion-resistant, are often included as electrode modifiers in designing electrochemical chemosensors and biosensors because of their unique catalytic, electric, and surface-related properties. This review summarizes the developments in electrochemical biosensors with integrated in their architecture metal nanostructures reported mainly during the last two years with a summary on some of the commonly used methods for the synthesis of metallic nanostructures. Nanodimensional noble metal structures might be considered as multipurpose electrode modifiers because of their abilities to act at the same time as electrocatalysts, signal amplifiers, and tools for immobilization and spatial orientation of redox proteins/enzymes or other type of bioreceptors.     

Electrochemical interfaces for chemical and biomolecular separations

The design of molecularly selective interfaces can lead to efficient electrochemically-mediated separation processes. The fast growing development of electroactive materials has resulted in new electroresponsive adsorbents and membranes, with enhanced selectivity, higher uptake capacities, and improved energy performance. Here, we review progress on the interfacial design for electrochemical separations, with a focus on chemical and biological applications. We discuss the development of new electrode materials and the underlying mechanisms for selective molecular binding, highlighting areas of growing interest such as metal recovery, waste recycling, gas purification, and protein separations. Finally, we emphasize the need for integration between molecular level interface design and electrochemical engineering for the development of more efficient separation processes. We envision that electrochemical separations can play a key role towards the electrification of the chemical industry and contribute towards new approaches for process intensification.     

Irreversible Amide‐Linked Covalent Organic Framework for Selective and Ultrafast Gold Recovery

Design of stable adsorbents for selective gold recovery with large capacity and fast adsorption kinetics is of great challenge, but significant for the economy and the environment. Herein, we show the design and preparation of an irreversible amide‐linked covalent organic framework (COF) JNU‐1 via a building block exchange strategy for efficient recovery of gold. JNU‐1 was synthesized through the exchange of 4,4′‐biphenyldicarboxaldehyde (BA) in mother COF TzBA consisting of 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)trianiline (Tz) and BA with terephthaloyl chloride. The irreversible amide linked JNU‐1 gave good stability, unprecedented fast kinetics, excellent selectivity and outstanding adsorption capacity for gold recovery. X‐ray photoelectron spectroscopy along with thermodynamic study and quantum mechanics calculation reveals that the excellent performance of JNU‐1 for gold recovery results from the formation of hydrogen bonds C(N)?H???Cl and coordinate interaction of O and Au. The rational design of irreversible bonds as both inherent linkage and functional groups in COFs is a promising way to prepare stable COFs for diverse applications.     

密度泛函理论研究碳链长度对氯化三烷基铵萃取氯化汞的影响

运用密度泛函理论方法研究了烷基碳链长度对氯化三烷基铵络合氯化汞的影响,计算结果表明,氯化三烷基铵与氯化汞的络合作用随着氯化三烷基铵中烷基碳链的增长而增强.通过对络合物的键长、Mayer键级和Mulliken电荷分析可知,电子富集在氯化三烷基铵的Cl原子上,并和Hg原子之间形成静电吸引作用.当烷基长度小于3时,烷基的电子效应影响较为明显,增强了原子之间的电子转移,使得络合物更稳定;当氯化三烷基铵烷基碳链长度大于3后,烷基链长对络合物中的电子转移不再有影响,络合物的稳定性受到烷基的几何效应影响更为明显.     

高炉冲渣水余热回收的可行性研究

根据高炉冲渣水的余热特点,提出了一个采用分离式热管换热器的余热回收的方案。文中对余热回收方案中换热设备的结构特点进行了描述。