Selective spectrophotometric determination of TNT in soil and water with dicyclohexylamine extraction

Contaminated land and groundwater remediation in military waste dumping sites often necessitates the use of simple, cost-effective, and rapid tests for detecting trinitrotoluene (TNT) residues in the field along with their dinitro-analogues. A simple, rapid, low-cost, and field-adaptable (on-site) colorimetric method was developed for quantifying TNT in the presence of RDX, PETN, picric acid, 2,4-DNT (dinitrotoluene), dinitrophenol, and dinitroaniline. Most commercialized methods for TNT assay-with the exception of Cold Regions Research and Engineering Laboratory of the U.S. Army (CRREL) method-use proprietary chemicals, and the color stability and intensity are highly dependent on the composition of the organic solution comprised of acetone or methanol. The developed colorimetric method is based on the extraction of TNT from water-acetone solution into an organic solvent mixture of dicyclohexylamine (DCHA)-isobutyl methyl ketone (IBMK) (10:1, v/v), filtration through a filter paper into a stoppered optical cell containing anhydrous sodium sulfate, and measurement of the absorbance of the organic extract at 531 nm after 5 min. The red-violet color of the extract was due to intermolecular charge-transfer (CT) between the electron attracting TNT and electron-donating DCHA, and the molar absorptivity for TNT in final organic solution was (1.16 ± 0.02) × 10⁴ L mol⁻¹ cm⁻¹.The R.S.D. of the slope of calibration line was 0.7%. The LOD of the method in the final organic phase was 0.38 μM TNT, and LOD values expressed on the basis of original soil TNT content were 0.5, 1.3, and 1.5 ppm (μg g⁻¹) for clay, loamy clay, and sandy soils, respectively. Unlike other spectrophotometric methods, the developed assay was basically tolerant to common cations and anions found in soil and water at 100-fold weight ratios, and to soil humic acids. Among a number of compounds that may be encountered in polynitro-explosive storage and waste reclaimation sites such as picric acid, dinitrophenol, 2,4-dinitrotoluene, dinitroaniline, RDX, PETN, and tetryl, only tetryl interfered with the developed TNT assay. Water tolerance and exploitability over a wide pH range were other superiorities over the CRREL method. The CT-complex was relatively stable, as the absorbance of the organic extract was not significantly influenced from the dilution of the water-acetone phase. Aside from the extractive-photometric procedure established for aqueous solutions, a simulated field colorimetric assay for TNT directly applicable to soil was also devised, based on direct color development in a 4:1 (v/v) acetone-dicyclohexylamine organic extract of soil at a liquid-to-solid ratio of 5 mL g⁻¹.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Determination of arsenic in petroleum refinery streams by electrothermal atomic absorption spectrometry after multivariate optimization based on Doehlert design

This paper reports the development of a methodology for the determination of arsenic in petroleum refinery aqueous streams containing large amounts of unknown volatile organic compounds, employing electrothermal atomic absorption spectrometry with polarized Zeeman-effect background correction. In order to make the procedure applicable, the influence of chemical modification and the drying step was examined. Also, pyrolysis and atomization temperatures and the amount of nitric acid added to the sample were optimized using a multivariate approach based on Doehlert matrix. Obtained results indicate that, in this kind of sample, arsenic must be determined by standard addition procedure with a careful control of the drying step temperature and ramp pattern. In order to evaluate the accuracy of the procedure, a test was performed in six spiked samples of petroleum refinery aqueous streams and the relative errors verified in the analysis of such samples (added As between 12.5 and 190 μg l⁻¹) ranged from −7.2 to +16.7%. The detection limit and the relative standard deviation were also calculated and the values are 68 pg and 7.5% (at 12.5 μg l⁻¹ level), respectively.     

Field-theoretic approach to second-order phase transitions in two- and three-dimensional systems

We review the physical principles which are at the basis of recent field-theoretic computations of the critical exponents in two- and three-dimensional systems. We concentrate on those points that do not show up explicitly in the more standard-expansion: they must be discussed with care if one uses a perturbative approach at fixed space dimensions (the loop expansion). We present in detail simple computations of the critical exponents, while we summarize the results of longer and more accurate computations.     

碳纳米管在接枝二元胺过程中微结构的变化

通过对酸化的多壁碳纳米管(MWNTs)进行酰氯化, 在碳纳米管表面接枝己二胺. 用红外光谱、热重分析、拉曼光谱和场发射扫描电镜对处理前后的碳纳米管进行分析表征. 结果表明, 经过酰氯活化, 己二胺比较容易被接枝到碳纳米管上. 而且还发现碳纳米管在酸化后形成紧密块状结构, 在接枝胺后重新变得蓬松, 其表观比容甚至大于原始碳纳米管. 从理论上分析了碳纳米管的反应过程, 对碳纳米管在接枝胺过程中微结构的变化机理进行推测, 认为通过接枝, 己二胺插入碳纳米管之间, 改变了碳纳米管之间的相互作用, 使得酸化后因形成氢键而导致的紧密堆砌结构被破坏.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

用于测量亚硝酸的长光程吸收光谱仪的研制

This article has been retracted at the request of the authors.     

Analysis of Petroleum Distillates from Fire Debris Using Supercritical Fluid Extraction with a Two‐Level Orthogonal Array Experimental Design

A supercritical fluid extraction (SFE) method was developed in the present study as an effective sample pretreatment technique of petroleum distillates from fire debris. Three petroleum distillates were used as target analytes, including 95 unleaded gasoline, kerosene, and premium diesel. An orthogonal array (L16) experimental design was adopted to separately evaluate primary SFE experimental factors. The SFE efficiencies of petroleum distillates at various extraction conditions were examined and the optimized SFE conditions were identified. Experimental results demonstrated that the optimized SFE method not only provided an effective extraction method for the spiked sample, but also successfully recovered residues of petroleum distillates from fire debris.     

低压下酞菁裂解法制备定向碳纳米管阵列

在低压条件下以酞菁铁为原料, 采用独立双温控加热系统在石英玻璃基底上气相沉积制备了大面积准直性好和管径均匀的碳纳米管. 利用扫描电子显微镜(SEM/FESEM)和透射电子显微镜(TEM)研究了定向碳纳米管的生长形态和结构. 详细讨论了系统真空度、反应温度、气体流速及氢气和氩气的体积比例等参数对碳纳米管生长的影响, 并测试了该碳纳米管的场发射性能及超电容性能.     

Closed tube sample introduction for gas chromatography-ion mobility spectrometry analysis of water contaminated with a chemical warfare agent surrogate compound

Ion mobility spectrometry (IMS) is a proven technology for detection of vapor phase chemical warfare agents. The technology is suitable for field portable instrumentation due to its small size, high sensitivity, speed of analysis, and low power consumption. However, it suffers from a limited dynamic range and potential difficulties in identifying compounds in complex matrices. The use of gas chromatography (GC) coupled to IMS can overcome the difficulty of chemical identification in mixtures by separating the sample into individual components before detection. Using this approach, IMS technology has previously been adapted to detect biological aerosols using an open tube pyrolyzer and a short GC column (Py-GC-IMS). The open sample introduction tube of a Py-GC-IMS instrument would be a convenient configuration to accept aerosol particulates, and while viewed as needed for aerosol trapping, is not optimal for liquid chemical analyses. To examine the usefulness of an existing Py-GC-IMS system for analysis of chemicals in water, an existing open-port sample interface was replaced with a septum-equipped closed tube injector to contain analyte vapors resulting from liquid injection. Tributylphosphate (TBP) was used as a surrogate chemical warfare agent, and aqueous injections into both closed and open tube assemblies were performed. Sample introduction into the closed tube inlet was also accomplished using solid phase microextraction (SPME) preconcentration. The limit of detection for TBP using an open tube, closed tube, and closed tube configuration with SPME sample introduction was 0.980, 0.196, and 0.0098 mg/L, respectively.