Significant change in water contact angle of electrospray‐synthesized SiO2 films depending on their surface morphology

Amorphous SiO₂ films were deposited by means of an electrospray technique. The relation between the water contact angle (WCA) of the deposited SiO₂ films and the surface morphology is investigated. The feeding rate of the electrospray process greatly affects the morphology of the synthesized SiO₂ films. There is also a significant change in the WCA on the surface of the films: the rougher the surface, the greater the WCA. A model based on the Cassie–Baxter formulation is used to explain the change observed in the WCA on the SiO₂ films. Copyright © 2012 John Wiley & Sons, Ltd.     

Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethylenically unsaturated polycarbosiloxanes for novel silicone hydrogels: synthesis,end‐group analysis,contact lens formulations,and structure–property correlations

A series of novel mono‐ethylenically unsaturated polycarbosiloxanes macromonomers as compatibilizer materials for soft silicon hydrogels were prepared from the anionic ring‐opening polymerization (AROP) of 2,2,5,5‐tetramethyl‐2,5‐disila‐1‐oxacyclopentane followed by methacrylation. The characterization was performed by end‐group analysis and included the determination of molecular weight, molecular weight distributions, end‐group functionality, and impurity profiles using gas chromatography‐mass spectrometry, gel permeation chromatography, nuclear magnetic resonance, and matrix‐assisted laser desorption/ionization time of flight mass spectrometry. The synthetic procedure was optimized to minimize the formation of any dimer that would have the potential to act as a low molecular weight cross linker. In addition, the novel di‐ethylenically unsaturated polycarbosiloxanes were synthesized by cationic polymerization. Use of these silicone derivatives was explored in the formulation of contact lenses, and the structure–property relationship was examined. When copoymerized with hydrophilic monomers, these were able to give transparent and wettable films with desired properties, particularly a low moduli for contact lenses. Contact lens with high modulus is often shown to impart a higher degree discomfort when worn upon the eye. It was clear from the structure–property relationship that the modulus and the tensile strength of the formulated material depend on the nature and length of the polycarbosiloxane used and may be tuned for the purpose as needed. Copyright © 2013 John Wiley & Sons, Ltd.     

Non‐contact evaluation of the electrical conductivity of thin metallic films by eddy current microscopy

An eddy current microscopy technique to evaluate the electrical conductivity of thin metallic films in a non‐contact manner is reported. A narrow track formed in an approximately 100 nm thick Au film was prepared, and a Co–Cr coated magnetic tip was driven to oscillate above the track both with and without current passing through the track. Despite the absence of current, the electromagnetic interaction between the tip and the stray magnetic field from the track gave rise to a phase delay in the probe. This was due to an eddy current being induced within part of the track. Moreover, measurements of the phase change in the probe oscillation for different metallic films with thicknesses of about 100 nm found this to be proportional to the electrical conductivity of the film. Finally, the electrical conductivity of an Al film was evaluated using the eddy current microscopy technique. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

A free boundary problem related to thermal insulation

We study a free boundary problem arising from the theory of thermal insulation. The outstanding feature of this set optimization problem is that the boundary of the set being optimized is not a level surface of a harmonic function, but rather a hypersurface along which a harmonic function satisfies a Robin condition. We show that minimal sets exist, satisfy uniform density estimates, and, under some geometric conditions, have “locally flat” boundaries.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.