Investigation of surface structure and composition of in situ annealed Fe–Mn binary alloy samples using RHEED and electron spectroscopy

The formation of oxides at the surface of Fe–1.5%Mn and Fe–0.6%Mn binary alloys was investigated as a function of the conditions of the heat treatments. Both the influence of temperature and the atmosphere under which the experiments were performed were studied. The range of annealing temperatures was adjusted to 800°C. The atmosphere consisted of a mixture of N₂–5%H₂ and traces of water vapour, with different fixed dew points ranging from −10°C to −30°C. The state of the annealed surfaces was determined using in situ analytical devices attached to the annealing reactor in order to avoid surface contamination or the formation of native oxides after the experiments due to contact with air. The structure and composition of the surfaces were determined by reflection high-energy electron diffraction (RHEED) and electron spectroscopy (XPS, AES). Copyright © 2002 John Wiley & Sons, Ltd.     

Quantitative determination of sotolon, maltol and free furaneol in wine by solid-phase extraction and gas chromatography-ion-trap mass spectrometry

A method for the analytical determination of sotolon [4,5-dimethyl-3-hydroxy-2(5H)-furanone], maltol [3-hydroxy-2-methyl-4H-pyran-4-one] and free furaneol [2,5-dimethyl-4-hydroxy-3(2H)-furanone] in wine has been developed. The analytes are extracted from 50 ml of wine in a solid-phase extraction cartridge filled with 800 mg of LiChrolut EN resins. Interferences are removed with 15 ml of a pentane-dichloromethane (20:1) solution, and analytes are recovered with 6 ml of dichloromethane. The extract is concentrated up to 0.1 ml and analyzed by GC-ion trap MS. Maltol and sotolon were determined by selected ion storage of ions in the m/z ranges 120-153 and 79-95, using the ions m/z 126 and 83 for quantitation, respectively. Furaneol was determined by non-resonant fragmentation of the m/z 128 mother ion and subsequent analysis of the m/z 81 ion. The detection limits of the method are in all cases between 0.5 and 1 microg l(-1), well below the olfactory thresholds of the compounds. The precision of the method is in the 4-5% range for levels in wine around 20 microg l(-1). Linearity holds at least up to 400 microg l(-1), and is satisfactory in all cases. The recoveries of maltol and sotolon are constant (70 and 64%, respectively) and do not depend on the type of wine. On the contrary, in the case of furaneol, red wines show constant and high recoveries (97%), while the recoveries on white wines range between 30 and 80%. Different experiments showed that this behavior is probably due to the existence of complexes formed between furaneol and sulphur dioxide or catechols. Sensory experiments confirmed that the complexed forms found in white wines are not perceived by orthonasal olfaction, and that the furaneol determined by the method can be considered as the free and odor-active fraction.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

Robust interface on ENR-50/TiO2 nanohybrid material based sol-gel technique: Insights into synthesis,characterization and applications in optical

In this work, the sol–gel technique was used to prepare a new organic–inorganic hybrid from Epoxidized Natural Rubber (ENR-50) and Titanium dioxide (TiO₂) by blending different content of titania precursors (10, 30, and 50 wt%) with an ENR-50 matrix. A wide range of analyses was conducted to understand the nature of this hybrid and also to evaluate its potential uses in applications required high refractive index such as micro optical and optoelectronic devices. Results indicated that the ring-opening reaction of epoxide groups in ENR-50 increased with the increase of titania content in the hybrid resulting a strong bonding between titania and ENR-50 through TiOC bond, which was observed in FTIR spectrum at 1027–1028 cm⁻¹. It is also observed a slight decrease in the intensity of the amorphous peak along with a new crystalline peak appeared at 2θ = 23 and 27° due to the crystalline nature of titania. The hybrids showed three thermal degradation steps in the range of temperature 76 to 769 °C due to the existence of the Ti moieties with the mixture of polymer chains, which in turn shifted the T_g at 24.3, 26.9 and 28.1 °C for the hybrid at 10, 30, and 50 wt% TiO₂ compared to the T_g of ENR-50 at −18.4 °C respectively. The morphology of the ENR-50 showed clear changes during of the synthesis of ENR-50/TiO₂ hybrids, these changes were proven by SEM, TEM, and AFM analyses. Uv–Vis results showed that the higher wavelength peak at 293 nm has shifted to 296, 298 and 300 nm for the hybrid at 10, 30, and 50 wt% TiO₂ respectively due to the strong interaction between titania precursors and ENR-50 matrix. Furthermore, the hybrids showed good optical transparency in the visible light range.     

Biocatalytic process intensification via efficient biocatalyst immobilization,miniaturization, and process integration

1. Download : Download high-res image (205KB)
2. Download : Download full-size image

     

Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

N-Heterocyclic Olefins as Electron Donors in Combination with Triarylborane Acceptors: Synthesis,Optical and Electronic Properties of D–π–A Compounds

N-heterocyclic olefins (NHOs), relatives of N-heterocyclic carbenes (NHCs), exhibit high nucleophilicity and soft Lewis basic character. To investigate their π-electron donating ability, NHOs were attached to triarylborane π-acceptors (A) giving donor (D)–π–A compounds 1 – 3 . In addition, an enamine π-donor analogue ( 4 ) was synthesized for comparison. UV–visible absorption studies show a larger red shift for the NHO-containing boranes than for the enamine analogue, a relative of cyclic (alkyl)(amino) carbenes (CAACs). Solvent-dependent emission studies indicate that 1 – 4 have moderate intramolecular charge-transfer (ICT) behavior. Electrochemical investigations reveal that the NHO-containing boranes have extremely low reversible oxidation potentials (e.g., for 3 , =−0.40 V vs. ferrocene/ferrocenium, Fc/Fc⁺, in THF). Time-dependent (TD) DFT calculations show that the HOMOs of 1 – 3 are much more destabilized than that of the enamine-containing 4 , which confirms the stronger donating ability of NHOs.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Isotachophoretic determination of carboxylic acids in biodegradation samples

In the current study a method of isotachophoretic separation of selected carboxylic acids was developed. The method was used for the determination of carboxylated oligo(ethylene glycol)s and their degradation products in biodegradation tests of PEG 250 DA [a mixture of dicarboxylated oligo(ethylene glycol)s]. Two tests were performed in the studies: the Organization for Economic Cooperation and Development (OECD) screening test and the river water die-away test. Both the biodegradation tests proved relatively fast biodegradation of the studied compounds. In the OECD screening test the biodegradation was faster than in the river water die-away test which can be ascribed to a higher concentration of bacteria in the biodegradation liquor. The minimal sample pretreatment and relatively low cost of analysis by the isotachophoretic method used here make it a good alternative to existing methods of carboxylic acids analysis.