Laser Machined Plastic Laminates: Towards Portable Diagnostic Devices for Use in Low Resource Environments

Despite significant progress in development of bioanalytical devices cost, complexity, access to reagents and lack of infrastructure have prevented use of these technologies in resource‐limited regions. To provide a sustainable tool in the global effort to combat infectious diseases the diagnostic device must be low cost, simple to operate and read, robust, and have sensitivity and specificity comparable to laboratory analysis. In this mini‐review we describe recent work using laser machined plastic laminates to produce diagnostic devices that are capable of a wide variety of bioanalytical measurements and show great promise towards future use in low‐resource environments.     

Trace metal analyses in honey samples from selected countries. A potential use in bio-monitoring

Honey is a sweet product made by bees using nectar from flowers. Concentrations of Ca, K, Mg, Fe, Zn, Mn, Cu, Pb and Cd were determined in 13 honey samples from the selected regions around the world. Levels of Ca, Mg, Cu, Fe, Zn and Mn were measured using flame atomic absorption spectrometry (FAAS). Potassium concentration was determined via flame photometry. Concentrations of Cd and Pb were determined using the electrothermal technique (ETAAS). It was estimated that the examined samples of honey from Greece, Turkey, Spain, Poland, Mexico, Argentina and Italy were of good quality in terms of metal concentrations (compliant with the norms referring to food products – WHO, Fifty-third Report of the joint FAO/WHO Expert Committee on Food Additives; Technical Report Series 776, Geneva), although the analysed samples were not free of heavy metals. The concentrations of the elements in the honey samples ranged from 2.38 to 9.31 μg · g^?1 for Zn, from 3.86 to 35.10 μg · g^?1 for Fe, from 0.19 to 21.64 μg · g^?1 for Mn, from 49.53 to 1006.90 μg · g^?1 for Ca, from 388.25 to 4761.50 μg · g^?1 for K and from 0.20 to 1.53 μg · g^?1 for Cu and regarding heavy metals from 0.11 to 2.78 μg · g^?1 for Pb and from 0.02 to 0.44 μg · g^?1 for Cd. According to these results it was found that the concentrations of heavy metals in the honey samples (except for alfalfa honey and eucalyptus honey from Italy) were under the acceptable limits for foods set out by the FAO/WHO. It was confirmed that the application of chemometric tools supports the extraction of significant information from analytical data, even though the availability of samples is not fully sufficient (this problem is often encountered in environmental analyses).     

氧化环境和比例对改性Hummers法制备GO的影响

以鳞片石墨(GR)为原料,采用改性Hummers法液相氧化方法制备氧化石墨,通过超声剥离的方法剥离出片状的氧化石墨烯(GO),探讨了H₂SO₄环境与H₂SO₄+H₃PO₄混酸环境和KMnO₄与GR的比例对GO制备的影响。采用FTIR、UV、TG、XRD、SEM和XPS等分析手段对制备的GO进行分析。结果表明：GO外貌是呈褶皱片状,在片层上主要有C=O、C-OH、-COOH和C-O-C等官能团,以共价键形式存在石墨层间;通过TG与XPS数据分析表明在H₂SO₄ H₃PO₄混酸环境下制备的GO含氧官能团较多,并且(KMnO₄)与鳞片石墨的最佳比例是1:4。     

搅拌萃取–分光光度法检测水环境中阴离子表面活性剂

建立搅拌萃取–分光光度法快速检测水环境中阴离子表面活性剂的含量。用三氯甲烷以800~1 200 r/min搅拌萃取水样与亚甲蓝溶液合成的活性物质,搅拌时间为2 min,静置分层后经脱脂棉过滤,待测。阴离子表面活性剂质量浓度在0.050~0.500 mg/L范围内与吸光度线性良好,相关系数大于0.999 0,方法检出限为0.010 mg/L。选择饮用水源水、农村地下水、湖泊水、城市河道水作为研究对象,平行检测结果的相对标准偏差(RSD)为1.9%~6.5%(n=6),加标回收率为91.3%~110%;对标准物质检测结果的相对误差为–2.3%~3.5%,满足实验室分析质量控制要求和现行地表水、地下水质量标准的评价要求。该方法与国标检测方法相比,在准确度、精密度、灵敏度、分析效率及试剂用量方面均有明显优势,具有推广应用价值。     

Applying green analytical chemistry for development and validation of RP-HPLC stability indicating assay method for estimation of fenoverine in bulk and dosage form using quality by design approach

A green and robust reverse-phase liquid chromatographic method has been developed for the determination of fenoverine (FEN), by applying combined principles of green analytical chemistry and quality by design approaches on a Spherisorb C18 column (150?×?4.6?mm, 3?µm) with UV detection at 262?nm. A two level fractional factorial design (2^^7-3) Res IV was used for screening of influential chromatographic factors. The critical method parameters actively affecting critical quality attributes (CQAs) were identified and further optimized using Box–Behnken design. The predicted optimum assay conditions comprised of methanol and ammonium acetate buffer 20?mM, in an extent of 81:19% v/v individually having a flow rate of 1.0?mL/min with a column oven temperature of 33°C. The drug was stressed in hydrolytic, oxidative, reductive, thermal, and photolytic conditions. The developed method was validated successfully. The detector response was linear in the concentration of 0.5–160?µg/mL with a limit of detection (LOD) and limit of quantitation (LOQ) as 0.1 and 0.3?µg/mL, respectively. The % recovery was found to be 99.7%. The analytical method volume intensity value for developed method was 45?mL and the environment assessment tool (EAT) score was 41.07. The method is simple, environmentally benign, rapid, and robust for the determination of FEN in bulk and in its dosage form.     

脉冲输入毒素对具有阶段结构的单种群生存影响的研究

研究了一类小容量污染环境中脉冲输入毒素对具有阶段结构的单种群生存问题,分别找到了种群生存与灭绝的阈值,利用不等式放缩技巧,得到了种群灭绝和持久生存的充分条件.利用MATLAB数值仿真,验证了理论结果的正确性,分析了毒素输入量,毒素输入周期及种群成长时间对种群生存的影响.     

可持续供应链管理实践对企业绩效的影响:基于中国的实证研究

本文基于我国172家企业的问卷调查数据,运用结构方程模型,对企业可持续供应链管理实践及其对绩效的影响进行实证分析。结果表明,企业实现内部可持续管理能够对企业管理供应商的行为有着显著的影响;同时,企业管理供应商的行为作为企业外部管理实践对企业的绩效有着显著的正向影响;在企业绩效中,环境绩效和社会绩效对经济绩效有着显著的正向影响,企业的外部管理实践能够通过环境绩效和社会绩效的提高实现最终经济绩效的明显增加。     

Aligned Poly(ε‐caprolactone) Nanofibers Guide the Orientation and Migration of Human Pluripotent Stem Cell‐Derived Neurons,Astrocytes, and Oligodendrocyte Precursor Cells In Vitro

Stem cell transplantations for spinal cord injury (SCI) have been studied extensively for the past decade in order to replace the damaged tissue with human pluripotent stem cell (hPSC)‐derived neural cells. Transplanted cells may, however, benefit from supporting and guiding structures or scaffolds in order to remain viable and integrate into the host tissue. Biomaterials can be used as supporting scaffolds, as they mimic the characteristics of the natural cellular environment. In this study, hPSC‐derived neurons, astrocytes, and oligodendrocyte precursor cells (OPCs) are cultured on aligned poly(ε‐caprolactone) nanofiber platforms, which guide cell orientation to resemble that of spinal cord in vivo. All cell types are shown to efficiently spread over the nanofiber platform and orient according to the fiber alignment. Human neurons and astrocytes require extracellular matrix molecule coating for the nanofibers, but OPCs grow on nanofibers without additional treatment. Furthermore, the nanofiber platform is combined with a 3D hydrogel scaffold with controlled thickness, and nanofiber‐mediated orientation of hPSC‐derived neurons is also demonstrated in a 3D environment. In this work, clinically relevant materials and substrates for nanofibers, fiber coatings, and hydrogel scaffolds are used and combined with cells suitable for developing functional cell grafts for SCI repair.

     

聚酰亚胺复合材料的摩擦性能及其机理研究

研究了含有固体润滑剂的炭纤维增强 PI复合材料在干摩擦和水润滑 2种状态下的摩擦磨损性能及其磨损机理 .结果表明 ,在水润滑条件下 ,摩擦系数和磨损率都有不同程度的降低 ,其中含 PTFE的炭纤维增强 PI复合材料的耐磨性最佳 ,最低磨损率为 9.9× 10 - 7mm3/ N· m.其主要原因可能与材料存在极性酰胺基团有关 ,酰胺基易通过氢键与水分子结合 ,在摩擦表面形成水吸附膜 ,使摩擦表面直接接触减少 ,从而改善材料的摩擦磨损性能     

Mathematical Models for Studying Environment Pollution Risks

The problem of longterm ecological prediction by means of mathematical modeling with available factual data on climate dynamics is discussed. The technique of quantitative estimates of risk/vulnerability on the basis of forward and inverse modeling and methods of the sensitivity theory is described. Examples of the calculated risk domains for Lake Baikal are given.