Three methods for analyzing forced vibration of a fluid-filled cylindrical shell

The forced vibration of an infinite elastic circular cylindrical shell filled with fluid is studied. Three methods are employed to analyze the forced vibration problem of this shell-fluid coupled system, that is, wave propagation approach (wave mode superposition), theorem of residues and a numerical integral method. In order to explain these methods more explicitly, before being used to investigate the vibration of an infinite fluid-filled elastic circular cylindrical shell, all these three methods are employed firstly to analyze the forced vibration problem of an infinite beam and an infinite elastic circular cylindrical shell in vacuo. Advantage and disadvantage of these three methods are discussed and their interesting relationship is revealed. That is, to any circumferential wavenumber and frequency of the external force, there is an unchangeable relationship between the general coordinates of various waves in the wave propagation approach and the residuals in the theorem of residues.     

一些随机重合点定理

本文引入了一种满足更一般的收缩不等式的多重函数类,并证明了属于该类的可测多重函数对的一些随机重合点定理。     

群胚上的Dirac结构及泊松约化

本文详细讨论了李双代数胚中的Dirac结构、群胚上的Dirac结构。利用Dirac结构的特征对的概念,给出了作用不变Dirac结构,拉回Dirac结构等概念的新的刻画。最后利用Dirac结构的有关性质,讨论了泊松齐性空间和泊松群胚作用的约化。     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

The Study of MMW and MW Attenuation Considering Multiple Scattering Effect in Sand and Dust Storms at Slant Paths

The influence of sand and dust storms on modern MMW and satellite communication systems reliability have been paid more attention to. The attenuations induced by sand and dust storms are estimated by means of Mie-theory and Rayleigh approximation, in the case of the tenuous distribution of particles. With the particle density increasing, however, these method become inadequate, the multiple scattering effects then become dominant for attenuation estimation. The attenuations considering multiple scattering effects are estimated by Monte-Carlo and four fluxes method at horizontal paths. At slant paths, based on multi-layer media model, the attenuations considering multiple scattering effects are calculated by layered Monte-Carlo method at 100, 37, 24, and 14GHz. It is shown that the multiple scattering effects should be considered at the attenuation prediction in the sand and dust storm, which the visibility is about 0.5km and smaller than 0.5km and frequency is about 20GHz. Above 30GHz, the multiple scattering effects due to sand and dust particles should be considered, as visibility is about 1km and smaller than 1km at slant paths.     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

二阶导数光谱-峰面积积分法同时测定芦荟中痕量铁(Ⅱ)和钴(Ⅱ)

在 1,10 -邻菲罗啉显色体系中 ,引入二阶导数光谱 -峰面积积分技术 ,建立了同时测定痕量铁 ( )和钴 ( )的新方法。该法可有效消除共存离子的干扰 ,提高了准确度和灵敏度。对铁和钴的表观摩尔吸光系数分别为 εFe5 .4 5× 10 6 L·mol-1·cm-1,εCo 1.1× 10 4 L· mol-1· cm-1;铁含量在 0 .0— 8.5 μg·m L-1,钴含量在 0 .0— 7.3μg· m L-1范围内遵守比耳定律。可用于芦荟中铁和钴的同时测定 ,结果令人满意     

High-Q whispering gallery modes in a spherical shell dielectric resonator: Characterization at microwave frequencies

We present a numerical and experimental characterization of high-Q whispering gallery resonant modes excited in a fused quartz spherical shell operated in the 18-26.5 GHz band; easy coupling and selection of modes is a most advantageous feature of the proposed structure with respect to ordinary bulk resonators. The numerical results, based on a finite element algorithm, well match experimental data, which also show the capability of our device to perform gaseous spectroscopy measurements. Received 25 October 2002 Published online 4 February 2003     

Phase formation and control of morphology in sputtered Cu-In alloy layers

The dependence of structural properties and surface morphology of Cu-In alloy layers on the composition and sputtering deposition sequence were investigated by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The properties of the co-sputtered alloy layers changed abruptly around the composition boundary when the Cu/In ratio reached 1/2. This can be explained by the effective heat of formation (EHF) model, which has been used to predict the sequence of phase formation for metal diffusion couples. The use of a co-sputtered alloy layer with a high In concentration was not suitable for fabricating solar cells, because the film had a very rough morphology due to large In islands formed on the CuIn₂ phase. However, it was possible to minimize this phase by In sputtering followed by co-sputtering with a Cu/In ratio of 1 (Cu-In/In/Glass). This permitted the fabrication of a homogeneous Cu-In alloy layer, which was not possible through the simple co-sputtering.     

B值随机变量阵列加权和的完全收敛性

设{X_ni:1≤i≤n,n≥1}为行间独立的B值r.v.阵列,g(z)是指数为1/p的正则变化函数,r>0,{ani 1≤t≤n,n≥1}为实数阵列,本文得到了使(?)成立的条件,推广并改进了Stout及Sung等的著名结论.