Improvement in the Physicochemical Properties of Ketoconazole through Complexation with Cyclodextrin Derivatives

Highly-soluble cyclodextrin derivatives, such as hydroxypropyl--cyclodextrin(HP--CD) and methyl--cyclodextrin (MEB), were tested as solubilizingagents for ketoconazole, with the aim of improving the physicochemical andbiopharmaceutical properties of this lipophilic imidazole antifungal agent. Productswere prepared in four molecular ratios by physical mixing, kneading and spray-dryingmethods. The kneaded products in a ratio of 1:2 and the spray-dried products exhibitedthe highest dissolution rates. The phase solubility diagrams of ketoconazole with thesecyclodextrins at 25 °C in water and in simulated intestinal medium wereconstructed. A solubility diagram of A_L type was obtained with HP--CD, and one of A_P type with MEB. The complexes were characterized by thermal methods(DSC, TG, DTG and DTA). Multicomponent systems were prepared with tartaric acid.The effects of water-soluble polymers, e.g., polyvinylpyrrolidone, on the aqueous solubility of ketoconazole were investigated. Particle size distribution, surface area, partition coefficient, heat of dissolution and wettability studies were also carried out. The formation of inclusion complexes was observed by means of thermoanalytical studies.     

Host–Guest Interactions of Risperidone with Natural and Modified Cyclodextrins: Phase Solubility, Thermodynamics and Molecular Modeling Studies

The solubility of risperidone (Risp) in aqueous buffered cyclodextrin (CD) solution was investigated for α-, β-, γ- and HP-β-CD. The effects of pH, ionic strength and temperature on complex stability were also explored. Neutral Risp tends to form higher order complexes (1:2) with both β- and HP-β-CD, but only 1:1 type complexes with α-, and γ-CD. The tendency of Risp to complex with cyclodextrins is in the order β-CD > HP-β-CD > γ-CD > α-CD. The 1:1 complex formation constant of Risp/HP-β-CD increases with increasing ionic strength in an opposite trend to the inherent solubility (S ₀) of Risp, thus indicating significant hydrophobic effect. The hydrophobic effect contributes to the extent of 72% towards neutral Risp/HP-β-CD complex stability, while specific interactions contribute only 4.7 kJ/mol. Thermodynamic studies showed that 1:1 Risp/HP-β-CD complex formation is driven by a favorable enthalpy change (ΔH ⁰=−31.2 kJ/mol, ΔS ⁰=−7 J/mol.K) while the 1:2 complex is largely driven by entropy changes (ΔH ⁰=−5.0 kJ/mol, ΔS ⁰=42 J/mol.K). Complex stability was found to vary with pH, with a higher formation constant for neutral Risp. Molecular mechanical computations using MM (atomic charges and bond dipole algorithms) and Amber force fields, which were carried out to explore possible sites of interactions between Risp and CDs and to rationalize complex stoichiometry, produced similar results concerning optimal inclusion complex geometries and stoichiometries.     

Can TMS and DSS be used as NMR references for cyclodextrin species in aqueous solution?

Tetramethylsilane (TMS) can be included by -cyclodextrin (-CD), and sodium 2,2-dimethylsilapentane-5-sulphonate (DSS) can form inclusion complexes with - and -CD. The NMR chemical shifts are changed considerably as a result of the strong interaction between CD and the guest compound in the inclusion complexes. A downfield shift of as much as 0.63 ppm shift downfield has been observed for the protons of external TMS in CD aqueous solution. In view of this, the question arises of whether TMS and DSS can be used as internal references. DSS in D₂O is suggested as an external reference for aqueous cyclodextrin solution in NMR measurements.     

Dimeric water embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene

X-ray crystallographic analysis and density functional B3LYP/6-31G(d) calculation confirm that dimeric water is embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene and stabilized by hydrogen bondings of aromatic π?H₂O(1) and methyl?H₂O(2) in the dimeric water inclusion complex with binding energies of 1.4 and 0.9 kcal mol⁻¹ respectively, and by hydrogen bonding formed between H₂O(2) and four phenolic OH groups from an adjacent tetra-(p-tert-butyl)thiacalix[4]arene, with binding energy of 3.8-4.2 kcal mol⁻¹.     

Some Pharmaceutical Properties of a New Branched Cyclodextrin, 6-O-α-(4-O- α-D-Glucuronyl)-D-glucosylβ-cyclodextrin

Some physicochemical and biological properties of a new branched cyclodextrin, 6-O--(4-O--d-glucuronyl)-d-glucosyl--cyclodextrin GUG--CyD) were investigated. Further, theinteraction of GUG--CyD with several drugs was studied by the solubility and spectroscopic methods, and compared with those of parent -CyD and 6-O--maltosyl--CyD(₂--CyD).The hemolytic activity of GUG--CyD on rabbit erythrocytes was lower than those of -CyD and ₂--CyD. GUG--CyD and ₂--CyD showed negligible cytotoxicity on Caco-2 cells up to at least 0.1 M. The inclusion ability of GUG--CyD to neutral and acidic drugs was comparable to or slightly smaller than those of -CyD and ₂--CyD, probably because of a steric hindrance of the branched sugar. On the other hand, GUG--CyD showed greater affinity for the basic drugs, compared with -CyD and ₂--CyD, owing to the electrostatic interaction of its carboxylate anion with positive charge of basic drugs. Thus GUG--CyD may be useful as a safe solubilizing agent particularly for basic drugs.     

Thermoanalytical Study of O,O'-Dibenzoyl-(2R,3R)-Tartaric Acid Supramolecular Compounds Part II. Investigation of the resolution of racemic alcohols

The resolution of three chiral alcohols with O,O'-dibenzoyl-(2R,3R)-tartaric acid (DBTA) via diastereoisomeric supramolecular compound formation was investigated with thermoanalytical methods. On the basis of TG measurements the DBTA:chiral alcohol molar ratio in the compounds is 1:1 which agrees with the results of single-crystal X-ray diffraction analysis. The DBTA – chiral alcohol supramolecular compounds have different supramolecular structure than the DBTA – achiral alcohol supramolecular compounds. The supramolecular compounds containing cyclohexanols have higher thermal stability than the compounds containing acyclic aliphatic alcohols. The amount of unreacted DBTA monohydrate in the solid phase can be determined both with DSC and with TG measurements. This revised version was published online in August 2006 with corrections to the Cover Date.     

Molecular chaperones, folding catalysts, and the recovery of active recombinant proteins fromE. coli

The high-level expression of recombinant gene products in the gramnegative bacteriumEscherichia coli often results in the misfolding of the protein of interest and its subsequent degradation by cellular proteases or its deposition into biologically inactive aggregates known as inclusion bodies. It has recently become clear that in vivo protein folding is an energy-dependent process mediated by two classes of folding modulators. Molecular chaperones, such as the DnaK-DnaJ-GrpE and GroEL-GroES systems, suppress off-pathway aggregation reactions and facilitate proper folding through ATP-coordinated cycles of binding and release of folding intermediates. On the other hand, folding catalysts (foldases) accelerate rate-limiting steps along the protein folding pathway such as thecis/trans isomerization of peptidyl-prolyl bonds and the formation and reshuffling of disulfide bridges. Manipulating the cytoplasmic folding environment by increasing the intracellular concentration of all or specific folding modulators, or by inactivating genes encoding these proteins, holds great promise in facilitating the production and purification of heterologous proteins. Purified folding modulators and artificial systems that mimic their mode of action have also proven useful in improving the in vitro refolding yields of chemically denatured polypeptides. This review examines the usefulness and limitations of molecular chaperones and folding catalysts in both in vivo and in vitro folding processes.     

Selective Transport of Lead(II) and Strontium(II) Through a Crown Ether-Based Polymer Inclusion Membrane Containing Dialkylnaphthalenesulfonic Acid

New polymer inclusion membranes (PIMs) containing 18-membered crownethers and dialkylnaphthalenesulfonic acid are proposed for Sr2+ and Pb2+removal from nitric acid solutions. The influence of source phasecomposition and stripping agents was characterized and permeabilitycoefficients were calculated. The PIMs are easy to prepare and may be usefulin separation and concentration procedures for these cations from complexmixtures such as nuclear waste. Long-term stability was obtained for atleast several weeks of constant use during which no significant change ofpermeability was observed.     

Studies on Molecular Recongnition of (a)-Cyclodextrin with Diphenyl compounds

The cyclodextrins(CDs) are a class of cyclic oligosaccharides made up of six(a), seven(a)or more [a-(1,4)-linked] D-glucopyranose units, and shaped like truncated cones with primary and secondary hydroxyl groups crowning the narrower rim and wider rim respectively. As they have a hydrophobic cavity of appropriate dimension, they can bind with various guest moleculars, such as hydrocarbon, cyclohexane, aromatic compounds, to form inclusion complexes. The cyclodextins inclusion complexation has been considered an ideal model mimicking the enzyme-substrate interaction and a lot of effect has been devoted to it. In this paper, we report our investigation on the inclusion complexation behavior of a-cyclodextrin(a-CD) with diphenyl compounds in order to further explore the molecular recongnition mechanism of 2:1 inclusion complexation of a-CD with aromatic compounds.Figure 1: Possible structures of the inclusion compounds.The inclusion complexation behavior of a-CD with sym-diphenyl-urea, sym-diphenyl-thiourea and diphenyl kotone as respective guest moleclars was studied by ultraviolet spectrometric titrations.The absorption spectral changes observed for the compounds in the absence and presence of a-CD are used to draw the corresponding Benesi-Hildebrand plots and caculate the complex stability constant value (Ks) for the inclusion compounds.The 2:1 inclusion complexations show higher binding constants by cooperative binding of one guest molecular in the closely two hydrophobic cyclodextrin cavites as compared with 1:1 inclusion complexations.The highest value observed for sym-diphenyl-urea could be due to the formation of a hydrogen bond between the carbonyl group and the hydrogen in the hydroxyl group of CD and this is not possible with sym-tiphenyl-thiourea. The lowest value observed for diphenyl kotone indicate the hydrophobic interaction is one of the binding force of cyclodextrin inclusion complex.     

1H-NMR Investigation of the Binding of 2-Methylnaphthalene to α-Cyclodextrin in D2O Solutions

As -cyclodextrin (-CD) was added to D₂Osolutions of 2-methylnaphthalene, its proton signals shifted to lower fieldsat low concentrations of -CD. At 2.0 × 10^-2 moldm^-3 of -CD, however, a reverse, higher-field shift wasobserved for the H-8 signal, indicating the formation of 1 : 1 and 2 : 1-CD–2-methylnaphthalene inclusion complexes. Intrinsic chemicalshift differences of all the protons in 2-methylnaphthalene have beenevaluated for both the 1 : 1 and the 2 : 1-CD–2-methylnaphthalene inclusion complexes. These intrinsicchemical shift differences suggest that the first -CD molecule has noselectivity in accommodating one end of uncomplexed 2-methylnaphthalene;-CD binds to a methyl group, as well as a naphthalene ring-end havingno methyl group, to form the 1 : 1 inclusion complex, resulting in theformation of two kinds of 1 : 1 complexes.