孕震断层锁固段累积损伤导致失稳的自组织-临界行为特征

弄清锁固段（岩石）破裂过程中自组织临界性的物理涵义,对正确认识地震可预测性问题等具有重要意义.本文指出锁固段破裂过程存在两个临界点,第一临界点为体积膨胀点,是自组织过程起点,在该点锁固段发生可判识的高能级破裂事件,这可视为锁固段宏观破裂前的惟一可识别前兆;第二临界点为峰值强度点,即失稳点,在该点通常发生有明显地表破裂带的大地震.基于以前研究给出的两者之间应变比理论关系以及地震震级与能量约束关系,可预测锁固段在第一和第二临界点处发生的某些标志性地震,并已得到诸多震例分析的支持.本文研究结果表明：由于锁固段是非均匀介质,失稳前必须出现自组织过程,自组织是“因”,临界失稳是“果”,正是因为自组织过程的存在,才使得对某些大地震（如标志性地震）的预测成为可能;两个临界点之间的破裂演化过程并不是瞬态行为,通常是一个长期过程,该过程中标志性地震的发生遵循确定性规律,并不存在小地震直接导致大地震（如标志性地震）的级联效应.     

彩色遥感影像阴影颜色特性分析

为了获得具有标识性且易于获取的阴影特征,总结了彩色图像常见的颜色模式,分析和研究了遥感影像中阴影的亮度、色调、饱和度以及阴影区B通道与G通道强度之间的关系等颜色特性.通过系列实验和分析可知:1)彩色遥感影像色调通道中的高亮值对阴影区域的位置具有一定程度的指示作用;2)低亮度是遥感影像中阴影的重要特征;3)同一幅遥感影像阴影区的饱和度在整体上具有一致性;4)同一幅遥感影像上,阴影区像素B通道强度与G通道强度的大小关系具有一定程度上的一致性.利用这四种特征进行自动阴影识别的初步结果,验证了这四种特征在对遥感影像阴影区的综合标识上是有效的,可以作为计算机阴影自动检测方法的建模基础.     

汶川地震诱发大型滑坡分布规律研究

2008年5 ·12汶川地震由于其超常的地震动力,触发了数百处大型滑坡灾害。本文以遥感解译所获取的汶川地震区112处面积大于50000m²大型滑坡的基本信息为基础,结合代表性大型滑坡实例的现场调绘,对汶川地震诱发大型滑坡的发育分布规律进行了较系统的研究。结果表明,汶川地震大型滑坡分布除表现出与汶川地震诱发区域性地质灾害类似的分布规律之外,因主要源于发震断层瞬间大幅度错动的直接地震动力引发的大型滑坡,其发育分布及滑动、运动方式还表现出自身的特点,具体可归结为以下几种效应: (1)距离效应:约80%的大型滑坡集中分布于发震断裂地表破裂带两侧5km的范围内,距离越远,滑坡分布数量越少; (2)锁固段效应:汶川地震诱发的大型滑坡主要集中分布在与发震断裂的交叉、错列、转换部位及NE段末端等5个集中区段。其中,红白-茶坪段是大型滑坡最为集中发育段,不仅滑坡数量多,而且规模大,汶川地震诱发的最大两处滑坡均分布于此段。其次为断裂NE段末端的南坝-东河口段,该段大型滑坡密集发育,东河口滑坡和窝前滑坡等大型滑坡均出露于此段; (3)上下盘效应:绝大多数(>70%)大型滑坡都位于活动断裂的上盘,存在明显的"上下盘效应"; (4)方向效应:在与发震断裂带近于垂直的沟谷斜坡中,在地震波传播的背坡面一侧的滑坡发育密度明显大于迎坡面一侧,存在"背坡面效应"。同时,大型滑坡的滑动及运动方向还与各区段断层的错动方向有一定的相关性。在断层活动以右旋走滑为主的青川境内,有相当数量的滑坡表现出向NE方向滑动和运动的特点。     

The influence of substituents in the quinone dihydrocycle of anthroneylidene molecules on the polymer chain rigidity

The effect of substituents on the conformational rigidity of the six-membered dihydrocycle constituting the repeating unit of heterocyclic polymers was studied by the semiempirical AM1 method and by conformational analysis. The polymer rigidity can be controlled over a wide range by choosing appropriate substituents in the dihydrocycle. An original procedure was proposed for calculating the Kuhn segment of the copolymer taking into account the Boltzmann factor. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 797–801, May, 2000     

基于新型广义位移的箱形梁扭转单元及应用

为了改进变截面连续箱梁桥的扭转分析理论,将截面总扭转角分解为自由翘曲扭转角和约束剪切扭转角,选取自由翘曲转角扭率作为广义位移,提出一个2节点8自由度的扭转梁段单元。从约束扭转控制微分方程出发,推导单元刚度矩阵及等效节点荷载列阵。引入应力增大系数,以反映约束扭转对初等梁应力的增大效应。数值算例验证了本文梁段单元的可靠性。最后对一个三跨变截面连续箱梁桥进行分析,结果表明,双力矩影响线与弯矩影响线较为类似,按双力矩影响线进行最不利荷载加载时最大应力值偏小;应力增大系数在集中荷载作用截面出现极值,均发生在腹板与顶板交点处;利用偏载放大系数来考虑扭转附加效应时,不宜考虑弯曲正应力较小及翘曲正应力出现极值的梁段区域。     

An Approach to Growth Delimitation of Straight Line Segment Classifiers Based on a Minimum Bounding Box

Several supervised machine learning algorithms focused on binary classification for solving daily problems can be found in the literature. The straight-line segment classifier stands out for its low complexity and competitiveness, compared to well-knownconventional classifiers. This binary classifier is based on distances between points and two labeled sets of straight-line segments. Its training phase consists of finding the placement of labeled straight-line segment extremities (and consequently, their lengths) which gives the minimum mean square error. However, during the training phase, the straight-line segment lengths can grow significantly, giving a negative impact on the classification rate. Therefore, this paper proposes an approach for adjusting the placements of labeled straight-line segment extremities to build reliable classifiers in a constrained search space (tuned by a scale factor parameter) in order to restrict their lengths. Ten artificial and eight datasets from the UCI Machine Learning Repository were used to prove that our approach shows promising results, compared to other classifiers. We conclude that this classifier can be used in industry for decision-making problems, due to the straightforward interpretation and classification rates.     

Surface and morphological characterization of polysiloxane-block-polyimides

Two series of polysiloxane-block-polyimides were synthesized by the method of solution imidization of the polyamic acids prepared from the dianhydride/diamine combinations of 3,3′,4,4′-diphenylsulfonetetracarboxylic dianhydride (DSDA)/2,2-bis[4-(4-aminophenoxy) phenyl] propane (BAPP) (Series A) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA)/bis[4-(3-aminophenoxy) phenyl] sulfone (BAPSM) (Series B) with three kinds of w-diamino-poly(dimethylsiloxane) with different number-average molecular weight added as a part of diamine. These polysiloxane-block-polyimides, having various compositions and chain lengths of the polysiloxane segments, were subjected to solution casting to prepare their films, and their surface and interface properties were analyzed by contact angle, XPS, AFM, and SEM. It was found that the surface tension and surface topography were greatly influenced by the composition and molecular weight of the polysiloxane segments because of their surface enrichment, which was affected by the environment and substrate with which the copolyimides had contacted. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2239–2251, 1997     

低能电子径迹中能量沉积频率分布

根据我们建立的径迹结构Monte Carlo计算模型,计算了低能电子在液态水中径迹范围内DNA分子片段模型和染色质丝片段模型区域内的能量沉积频率分布,结果与OREC和CPA程序结果进行了比较,这些计算结果为解释低能重离子注入生物体造成深部生物效应而提出的一种物理机制──软X射线机制提供了理论依据.