Statistical analysis of findings in external and internal audits and assessments in a testing laboratory

A statistical analysis of findings in assessments by an accreditation body, external audits and internal audits in an accredited testing laboratory for gamma-ray spectrometry is presented. The frequencies of observations reported in different areas were examined and analysed. The differences are interpreted in terms of the varying importance associated with the different areas as perceived by auditors and assessors.     

Characterisation of the steady state tube furnace (ISO TS 19700) for fire toxicity assessment

The steady state tube furnace (Purser furnace, ISO TS 19700) has been developed specifically to replicate the generation of toxic products from real fires under different fire conditions on a bench-scale. Steady state burning is achieved by driving the sample into a furnace of increasing heat flux at a fixed rate and recording the product yields over a steady state period in the middle of the run. The furnace, sample, and effluent dilution chamber temperature profiles are presented to characterise the conditions in the apparatus. The distribution of smoke in the mixing chamber has been investigated to demonstrate the efficiency of mixing in the effluent dilution chamber. The heat flux applied to the sample at various points through the furnace has been measured, showing that conditions vary from those typical of pre-flaming to fully developed fires. An initial investigation of the repeatability and interlaboratory reproducibility has been undertaken, showing acceptable low levels of uncertainty in the toxic product yields.     

Implementation of a quality management system in meteorological practice in Serbia

An optional approach in the meteorological service Quality Management System (QMS) based on the case study of the Republic Hydrometeorological Service (MHS) of Serbia is presented and discussed in this paper. The idea is to use the ISO/IEC 17025 standard as a base for its QMS development. Main reasons for such a decision and the elements of the implemented solution are presented and discussed. Meteorological testing processes of the MHS of Serbia and relevant ISO/IEC 17025 scope of accreditation are presented. After establishing competencies in meteorological, environmental, and hydrological testing, the MHS of Serbia will develop an integrative ISO 9001 QMS. The Serbian case study could be taken into consideration as one of the options related to the future World Meteorological Organization Quality Management Framework.     

The Italian way: Accreditation and continuous quality improvement in clinical laboratories

 The transition from quality assurance of the analytical phase to the quality management of total testing in clinical laboratories is still at an early stage. But it has begun. Accreditation through voluntary, educational and professional schemes, like the Clinical Pathology Accreditation scheme, is a useful tool for following defined standards of practice and having these independently confirmed on the basis of a peer review. Approved clinical laboratories can obtain a hallmark of performance and offer reassurance to users of their services. However, accreditation does not guarantee an error-free service; it is not the final step, but an important stage in the improvement process. Quality is a journey and continuous quality improvement is the paradigm for better addressing our efforts to satisfy customers' expectations for the desired health outcomes related to a high-quality laboratory service.     

Application of the ISO 13472-1 in situ technique for measuring the acoustic absorption coefficient of grass and artificial turf surfaces

This paper presents the applicability of an in situ technique based on ISO 13472-1 standard for measuring the acoustic absorption coefficient of grass and artificial turf surfaces for normal incidence from a sound source. The in situ method is based on acoustic impulse response measurement of the material surface. A maximum length sequence (MLS) signal is played through a loudspeaker and the acoustic response from the surface is recorded using a single microphone. The fast Hadamard transform and fast Fourier transform based digital signal post-processing algorithm provides the acoustic absorption coefficient of the surface under test. The normal incidence acoustic absorption coefficient of a commercial artificial quash surface of Dow Co. obtained from this method was compared with the results from the ASTM E1050 impedance tube method for the same surface. The acoustic absorption coefficients of a test-site grass surfaces were measured for 30 mm and 100 mm length of grass blades in wet and dry soil conditions. Substantial difference in the acoustic absorption coefficient was observed for a similar grass-like artificial surface used for estimating sound power of commercial garden equipments and lawnmowers. The advantage of the in situ method lies in its ability to measure the normal incident acoustic absorption coefficient of any planar surface as installed or in situ. Additionally a quick testing time of less than a minute with the use of a laptop sound card based inexpensive data acquisition system is the main feature of this robust method.     

Robust regression techniques A useful alternative for the detection of outlier data in chemical analysis

The validation of an analytical procedure means the evaluation of some performance criteria such as accuracy, sensitivity, linear range, capability of detection, selectivity, calibration curve, etc. This implies the use of different statistical methodologies, some of them related with statistical regression techniques, which may be robust or not. The presence of outlier data has a significant effect on the determination of sensitivity, linear range or capability of detection amongst others, when these figures of merit are evaluated with non-robust methodologies.In this paper some of the robust methods used for calibration in analytical chemistry are reviewed: the Huber M-estimator; the Andrews, Tukey and Welsh GM-estimators; the fuzzy estimators; the constrained M-estimators, CM; the least trimmed squares, LTS. The paper also shows that the mathematical properties of the least median squares (LMS) regression can be of great interest in the detection of outlier data in chemical analysis. A comparative analysis is made of the results obtained by applying these regression methods to synthetic and real data. There is also a review of some applications where this robust regression works in a suitable and simple way that proves very useful to secure an objective detection of outliers. The use of a robust regression is recommended in ISO 5725-5.     

Country road and field surface profiles acquisition,modelling and synthetic realisation for evaluating fatigue life of agricultural machinery

Fatigue life of agricultural machinery is strongly affected by the surfaces that these machines operate on. In the present paper a sensor-frame was developed to acquire road and field profiles in absolute geo-referenced coordinates. The sensor-frame was validated by measuring discrete trapezoidal bumps with known dimensions resulting in a root mean squared (RMS) error of 6–8 mm. Profiles were acquired from a country road and from a mowed grass field. Using the quarter-car vehicle model, the movement of an agricultural vehicle was simulated for various speeds. The resulted vertical loads were rainflow-counted and the accumulated fatigue pseudo damage was calculated using Palmgren–Miner linear rule. Based on the derived Power Spectrum Density (PSD), the profiles were classified according to ISO 8608 standard. Two methodologies were followed to model and create a number of synthetic realisations for each profile: Direct Spectrum Estimate (DSE) and ISO based modelling. Simulating the produced synthetic profiles with the quarter-car vehicle model, the corresponding pseudo damage was calculated. The accumulated damages from the DSE models were closer to the corresponding ones from the measured profiles. ISO based models could not model the profile irregularities, which proved to contribute the largest part of the accumulated fatigue damage.     

Application of surface analysis methods to nanomaterials: summary of ISO/TC 201 technical report: ISO 14187:2011 – surface chemical analysis – characterization of nanomaterials

The ISO technical report 14187 provides an introduction to (and examples of) the information that can be obtained about nanostructured materials by using surface analysis tools. In addition, both general issues and challenges associated with characterizing nanostructured materials and the specific opportunities and challenges associated with individual analytical methods are identified. As the size of objects or components of materials approaches a few nanometers, the distinctions among ‘bulk’, ‘surface’, and ‘particle’ analysis blur. This technical report focuses on issues specifically relevant to surface chemical analysis of nanostructured materials. The report considers a variety of analysis methods but focuses on techniques that are in the domain of ISO/TC 201 including Auger electron spectroscopy, X‐ray photoelectron spectroscopy, secondary ion mass spectrometry, and scanning probe microscopy. Measurements of nanoparticle surface properties such as surface potential that are often made in a solution are not discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

A model to set measurement quality objectives and to establish measurement uncertainty expectations in analytical chemistry laboratories using ASTM proficiency test data

A model is presented that correlates historical proficiency test data as the log of interlaboratory standard deviations versus the log of analyte concentrations, independent of analyte (measurand) or matrix. Analytical chemistry laboratories can use this model to set their internal measurement quality objectives and to apply the uncertainty budget process to assign the maximum allowable variation in each major step in their bias-free measurement systems. Laboratories that are compliant with this model are able to pass future proficiency tests and demonstrate competence to laboratory clients and ISO 17025 accreditation bodies. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/ 10.1007/s007690100398-y. Received: 31 March 2001 Accepted: 11 September 2001