Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.     

Voltammetric Determination of Aflatoxin B1

For the first time the possibility of voltammetry used for the determination of aflatoxin B1 on a glassy carbon electrode was shown. The effect of pH of a supporting electrolyte on the analytical signal of aflatoxin B1 has been investigated and it was shown that there is a more pronounced peak with a maximum current at pH of 5.33. The most favorable supporting electrolyte for a linear range of detectable concentrations of aflatoxin B1 – 0.1 M (NH₄)₂SO₄ was determined. The results of research on the development of conditions of voltammetric measurement of aflatoxin B1 are presented.     

Hydrogen bonding in 4‐nitrobenzene‐1,2‐diamine and two hydrohalide salts

The structures of 4‐nitrobenzene‐1,2‐diamine [C₆H₇N₃O₂, (I)], 2‐amino‐5‐nitroanilinium chloride [C₆H₈N₃O₂⁺·Cl⁻, (II)] and 2‐amino‐5‐nitroanilinium bromide monohydrate [C₆H₈N₃O₂⁺·Br⁻·H₂O, (III)] are reported and their hydrogen‐bonded structures described. The amine group para to the nitro group in (I) adopts an approximately planar geometry, whereas the meta amine group is decidedly pyramidal. In the hydrogen halide salts (II) and (III), the amine group meta to the nitro group is protonated. Compound (I) displays a pleated‐sheet hydrogen‐bonded two‐dimensional structure with R₂²(14) and R₄⁴(20) rings. The sheets are joined by additional hydrogen bonds, resulting in a three‐dimensional extended structure. Hydrohalide salt (II) has two formula units in the asymmetric unit that are related by a pseudo‐inversion center. The dominant hydrogen‐bonding interactions involve the chloride ion and result in R₄²(8) rings linked to form a ladder‐chain structure. The chains are joined by N—H...Cl and N—H...O hydrogen bonds to form sheets parallel to (010). In hydrated hydrohalide salt (III), bromide ions are hydrogen bonded to amine and ammonium groups to form R₄²(8) rings. The water behaves as a double donor/single acceptor and, along with the bromide anions, forms hydrogen bonds involving the nitro, amine, and ammonium groups. The result is sheets parallel to (001) composed of alternating R₅⁵(15) and R₆⁴(24) rings. Ammonium N—H...Br interactions join the sheets to form a three‐dimensional extended structure. Energy‐minimized structures obtained using DFT and MP2 calculations are consistent with the solid‐state structures. Consistent with (II) and (III), calculations show that protonation of the amine group meta to the nitro group results in a structure that is about 1.5 kJ mol⁻¹ more stable than that obtained by protonation of the para‐amine group. DFT calculations on single molecules and hydrogen‐bonded pairs of molecules based on structural results obtained for (I) and for 3‐nitrobenzene‐1,2‐diamine, (IV) [Betz & Gerber (2011). Acta Cryst. E 67 , o1359] were used to estimate the strength of the N—H...O(nitro) interactions for three observed motifs. The hydrogen‐bonding interaction between the pairs of molecules examined was found to correspond to 20–30 kJ mol⁻¹.     

计算富勒烯结构的新方法:曲率定理*

介绍了利用曲率定理计算富勒烯结构的方法,证明了富勒烯结构中五元环数恒为12,与传统的欧拉定理法进行了对比,凸显了曲率定理法在研究多面体结构时直观形象的特点,强调了数学方法对解决化学问题和认识化学模型的重要性。     

Preparation and properties of ZnMoO4 anode materials with polymer network gel method

Polymer network gel method combines the advantages of solid-phase method and liquid phase method, triggering acrylamide (AM) radical polymerization in aqueous solution and N, N′- methylene bis acrylamide (MBAM) active double bond cross-linking reaction, forming polymer chains to form a three-dimensional network. The polymer network space formed by the gel is bound and evenly distributed to the ions in the solution, thereby reducing the contact and aggregation of molecules and achieving the purpose of uniform particle size and small particle size. The principle diagram of network gel is shown in Figure. Using cubic zinc acetate and ammonium molybdate tetrahydrate as raw materials, cubic ZnMoO₄ negative electrode materials were prepared with polymer network gel method. The polymer network gel method has various effects on the structure, morphology and electrochemical properties of materials. Besides, the calcination temperature and calcination time were also the key factors to the electrochemical properties of the materials. In this paper, the effects of the ratio of monomer and crosslinker, calcination temperature and calcination time on ZnMoO₄ materials were studied by single variable method, the preparation process was optimized, and its characterization and electrochemical tests were carried out. After 100 cycles, the optimized ZnMoO₄ electrode has a discharge capacity of 374.0 mAh· g^?1, 332.5, 263.5 and 177.1 mAh · g^?1 at current densities of 0.1, 0.5, 1.0 and 2.0 A g^?1, respectively. The electrochemical results show that the optimized ZnMoO₄ has high capacity, large rate capability and excellent cycle stability.     

Development and validation of an LC–MS/MS method for the quantification of artificial sweeteners in human matrices

Artificial sweeteners are widely used as substitutes for sugar. The sweeteners are generally considered safe, however their whereabouts during pregnancy and lactation and the effect on child development are poorly explored. There is a need for new tools to measure these substances during pregnancy and lactation. Here, we describe the development and validation of a sensitive liquid chromatography–tandem mass spectrometry method for the simultaneous quantification of acesulfame, cyclamate, saccharin and sucralose in human plasma, umbilical cord blood, amniotic fluid and breast milk. The samples were prepared by protein precipitation and separated on a Luna Omega Polar C₁₈ column (2.1 × 50 mm, 1.6 μm). Electrospray ionization in negative mode and multiple reaction monitoring were used to monitor the ion transitions. The validated concentration ranges were from 1 to 500 ng/ml (10–500 ng/ml for sucralose). Interassay precisions were all ≤15% and the accuracies were within ±15%. Stability, linearity, dilution integrity, carryover and recovery were also examined and satisfied the validation criteria. Finally, this analytical method was successfully applied on spiked samples of plasma, umbilical cord blood, amniotic fluid and breast milk, proving its suitability for use in clinical studies on artificial sweeteners, including during pregnancy and lactation.     

柠檬酸配合法制备CuMnCeOx催化剂及常温催化氧化性能研究

摘要：常温催化氧化是消除室内HCHO污染最可行的方法之一,其中以过渡金属氧化物为代表的催化剂因性能优异、成本低廉而备受广泛关注。采用柠檬酸络合法和水热法制备了一系列CuMnCeOx催化剂,研究考察制备方法及载体对催化剂氧化性能的影响,并利用XRD、SEM、BET、H2-TPR、XPS和IR等对催化剂进行微观表征与分析。研究发现,制备方法及载体类型对催化剂的表面结构形貌、氧化性能产生显著影响,其中采用柠檬酸络合法所制的CuMnCeOx-C催化剂性能最佳,48h的HCHO去除率达98.6%,完全满足GB50325-2001标准要求,其介孔结构,晶体粒径及所形成的铈基铜锰固溶体均利于形成大量氧空位及催化氧化反应,且展示出良好的抗水蒸气和稳定性能,其在常温催化氧化VOCs方面具有重要应用前景。     

Trends in the monitoring of legacy and emerging organic pollutants in protected areas

Protected Areas (PAs) are locations for conservation, internationally recognized for their natural, ecological, and/or cultural values. Human presence in PAs is generally limited to minimal or banned exploitation of natural resources. However, different threats to PAs are evident as a result of short and long-range transport of organic pollutants of legacy and emerging concern. There has been a shift of interest in legacy pollutants such as persistent organic pollutants (POPs) to emerging compounds, resulting in a need for improved monitoring strategies in PAs. Here, we highlight the main advances in environmental analytical chemistry for legacy and emerging pollution monitoring in PAs. Trends in sampling, sample preparation and instrumental determination of multiclass organic pollutants in biotic and abiotic matrices are presented and discussed. Here, we considered the most relevant and recent literature regarding organic pollutants in PAs from terrestrial to aquatic landscapes collected within 2015 to the present time frame.     

Rational hydrothermal synthesis of graphene quantum dots with optimized luminescent properties for sensing applications

Hydrothermal synthesis using graphene oxide (GO) as a precursor has been used to produce luminescent graphene quantum dots (GQDs). However, such a method usually requires many reagents and multistep pretreatments, while can give rise to GQDs with low quantum yield (QY). Here, we investigated the concentration, the temperature of synthesis, and the pH of the GO solution used in the hydrothermal method through factorial design experiments aiming to optimize the QY of GQDs to reach a better control of their luminescent properties. The best synthesis condition (2 mg/mL, 175 °C, and pH = 8.0) yielded GQDs with a relatively high QY (8.9%) without the need of using laborious steps or dopants. GQDs synthesized under different conditions were characterized to understand the role of each synthesis parameter in the materials' structure and luminescence properties. It was found that the control of the synthesis parameters enables the tailoring of the amount of specific oxygen functionalities onto the surface of the GQDs. By changing the synthesis' conditions, it was possible to prioritize the production of GQDs with more hydroxyl or carboxyl groups, which influence their luminescent properties. The as-developed GQDs with tailored composition were used as luminescent probes to detect Fe³⁺. The lowest limit of detection (0.136 μM) was achieved using GQDs with higher amounts of carboxylic groups, while wider linear range was obtained by GQDs with superior QY. Thus, our findings contribute to rationally produce GQDs with tailored properties for varied applications by simply adjusting the synthesis conditions and suggest a pathway to understand the mechanism of detection of GQDs-based optical sensors.