吸附氢气后的钯团簇在氧化亚铜表面上的稳定性研究

为了探究吸附H2后的Pdn团簇在Cu2O（111）完整表面和铜缺陷表面上的稳定性,计算了负载在Cu2O（111）完整表面和铜缺陷表面上的Pdn（n=1-4）对H2分子的最稳定吸附结构;利用在给定H2压力和温度下Pdn / Cu2O表面吸附H2的相图揭示了Pdn团簇在Cu2O（111）两个表面的变化情况。结果表明,在吸附了H2分子以后,Pdn团簇更倾向于保持原有的结构,且随着Pd团簇的增大,吸附H2的数量也逐渐增长。     

Au/SBA-15 的制备及其催化 CO 氧化反应性能

 以 SBA-15 为载体, 采用沉积沉淀法制备了纳米 Au 催化剂, 研究了不同预处理条件对 Au 在载体表面状态的影响, 考察了催化剂样品催化 CO 氧化性能. 以高分辨率透射电子显微镜、N2 吸附、X 射线衍射、紫外-可见漫反射吸收谱、X 射线光电子能谱和电感耦合等离子体发射光谱等手段对催化剂的结构和表面性质进行了表征. 结果表明, 经还原焙烧处理后的 Au/SBA-15 催化剂热稳定性较好, Au 在 SBA-15 孔道表面呈高分散状态, 样品在 CO 氧化反应中表现出优异的低温催化活性和高温稳定性, 同时具有优异的抗烧结性能和良好的循环稳定性.     

Synergistic effects of layered double hydroxide with phosphorus-nitrogen intumescent flame retardant in PP/EPDM/IFR/LDH nanocomposites

<正>Synergistic effects of layered double hydroxide(LDH) with intumescent flame retardanct(IFR) of phosphorus-nitrogen (NP) compound in the polypropylene/ethylene-propylene-diene/IFR/LDH(PP/EPDM/IFR/LDH) nanocomposites and related properties were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),limiting oxygen index(LOI),UL-94 test,cone calorimeter test(CCT) and thermo-gravimetric analysis (TGA).The XRD and TEM results show that the intercalated and/or exfoliated nanocomposites can be obtained by direct melt-intercalation of PP/EPDM into modified LDH and that LDH can promote the IFR additive NP to disperse more homogeneously in the polymer matrix.The SEM results provide positive evidence that more compact charred layers can be obtained from the PP/EPDM/NP/LDH sample than those from the PP/EPDM/LDH and PP/EPDM/NP samples during burning.The LOI and UL-94 rating tests show that the synergetic effects of LDH with NP can effectively increase the flame retardant properties of the PP/EPDM/NP/LDH samples.The data from the CCT and TGA tests indicate that the PP/EPDM/NP/LDH samples apparently decrease the HRR and MLR values and thus enhance the flame retardant properties and have better thermal stability than the PP/EPDM/LDH and PP/EPDM/NP samples.     

Fluorene-bridged polyphenylquinoxalines with high solubility and good thermal stability: Synthesis and properties

<正>A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyphenylquinoxalines(PPQs).The obtained polymers were found to be soluble in common organic solvents such as N-methyl-2-pyrrolidone(NMP),chloroform and m-cresol.Flexible and tough PPQ films obtained by spin-casting their NMP solutions exhibited tensile strengths higher than 60 MPa.The films also demonstrated good thermal stability up to 500℃in nitrogen and glass transition temperatures higher than 280℃.In addition,the PPQ films exhibited good hydrolytic stability. High surface and volume resistivity retentions were achieved for the films after immersion or boiling in water for 24 h.     

Synthesis and characterization of novel optically active poly(amide-imide)s and poly(ester-imide)s containing calix[4]arene and amino acid units with binding ability towards alkali metal and toxic heavy metal cations

<正>A novel calix[4]arene derivative 2 with amino functional groups at the lower rim was first prepared via introduction of nitro functional groups and amination of the dinitro derivative of calix[4]arene.The optically active monomers were synthesized by dehydration of L-leucine(and L-isoleucine) and 3,3',4,4'-benzophenonetetracarboxylic- 3,3',4,4'-dianhydride(3) followed by reaction with thionyl chloride to form 5a and 5b.Two methods,polymerization under microwave irradiation and solution polymerization in CH_2Cl_2/TEA,were then employed to carry out the condensation polymerization of 2 with the optically active monomers 5a and 5b,respectively.The polymerization conditions affected the kind of resulting polymers,poly(amide-imide)s(PAIs) 6a and 6b and poly(ester-imide)s(PEIs) 6a' and 6b' were obtained selectively in good yields and moderate inherent viscosities.Sorption-extraction experiments were carried out using cram picrate extraction method and verified good binding ability of the resulting calixarene-based polymers towards silver,alkali metal and toxic heavy metal cations.Also thermogravimetric analysis indicated that the resulting PAIs and PEIs were thermally stable.     

含硫醚结构均苯型聚酰亚胺的合成及表征

以4,4′-二氨基二苯硫醚(SDA)和均苯四酸酐(PMDA)为原料,通过溶液缩聚法-热酰亚胺/化学酰亚胺化的方法制备了一种含硫醚结构均苯型聚酰亚胺.利用高级旋转流变仪建立了在线跟踪反应进程的方法,采用热失重分析仪研究反应条件对热酰亚胺化及化学酰亚胺化法的影响,这些方法的建立为进一步制备高性能的聚酰亚胺提供有效的实验手段.采用小角激光光散射法、红外光谱、元素分析、接触角仪、DSC等方法对聚合物的结构与性能进行表征.结果显示,硫醚结构的引入,可有效改善聚合物薄膜的表面性能,其与铜箔之间的粘附功明显大于传统聚酰亚胺,在无胶挠性线路板应用方面显示出较好的应用前景.所获聚合物的Mw为(6.7±1.6)×104,分解温度均高于560℃;DSC的结果显示所制备的两种酰亚胺化聚合物均具有较高的玻璃化转变温度,相比之下,化学酰亚胺化更有利于获得高酰亚胺化程度的聚合物,产物的玻璃化转变温度也更高.     

聚芴类半导体光谱稳定性

有机半导体的物理和化学性质直接影响其光电器件的性能, 这为物理化学提出了新的研究内容与挑战. 其中, 聚芴类蓝光二极管的光谱稳定性及低能发射带(LEEB)的起源问题是国际上近十年的热点问题之一. 本文系统概述了低能发射带的现象、表征方法以及可能的形成机理, 包括链间作用导致的激基缔合物发射、器件制备或降解过程形成的芴酮缺陷发射、芴酮聚集态发射以及聚芴端羟基界面氧化导致的绿光发射. 本文综述各种物理掺杂和界面调控改善聚芴类二极管蓝光稳定性的策略, 着重论述非平面基团的空间位阻、分子构象与链的拓扑结构以及引入抗氧化受阻胺光稳定剂来提高其光谱稳定性策略.     

苯并二噁唑系列聚合物的合成及表征

以4,6-二氨基-1,3-苯二酚盐酸盐为原料,分别和对苯二甲酸、1,4-萘二甲酸、2,6-萘二甲酸、2,5-噻吩二甲酸、4,4-′(1,2-二苯基乙烯)二甲酸在多聚磷酸介质中反应,合成单环的聚(1,4-亚苯基)苯并二噁唑(PBO)、稠环的聚(1,4-亚萘基)苯并二噁唑(1,4-PNBO)和聚(2,6-亚萘基)苯并二噁唑(2,6-PNBO)、杂环的聚(2,5-亚噻吩基)苯并二噁唑(PTBO)及含有两个苯环的聚-4,4′-亚(1,2-二苯乙烯基)苯并二噁唑(4,4′-PDPEBO).采用傅立叶红外光谱、热重分析、元素分析、特性黏数分析对系列聚合物进行了表征.研究结果表明PBO、1,4-PNBO、4,4-′PDPEBO、2,6-PNBO和PTBO 5种聚合物的耐热性能依次降低,特性黏数依次为25.40、16.76、20.63、15.38和14.63 dL/g.     

星型POSS/PMMA复合材料的ATRP合成及其热性能研究

以γ-氯丙基三乙氧基硅烷为原料合成八官能团γ-氯丙基多面体低聚倍半硅氧烷(POSS),以该POSS为引发剂,通过原子转移自由基聚合(ATRP)合成具有星型结构的POSS/PMMA复合材料.通过傅立叶红外(FTIR)、核磁共振(NMR)、凝胶渗透色谱(GPC)和X-射线衍射(XRD)等手段对POSS和POSS/PMMA的化学组成和结构进行了表征,结果表明已经合成八官能团γ-氯丙基POSS,POSS/PMMA复合材料具有分子设计的预定结构,且复合材料的分子结构得到了较好的控制.通过ATRP法实现了POSS在聚合物中的单分散.此外,TGA的研究表明,POSS的引入提高了聚合物的热稳定性.     

液相沉淀法制备稀土-锆固溶体及其性能研究

采用液相沉淀法制备了Ce0.6Zr0.3La0.05Y0.05O2固溶体。通过BET,XRD,SEM,程序升温还原和氧脉冲吸附等方法对合成产品性能进行了表征。研究了前驱体的形态、高温水热处理、表面处理以及后期固溶体的还原处理对固溶体性能的影响。其中前驱体的高温水热处理和固溶体的还原处理对固溶体的催化性能有很大的影响。200℃水热处理制得的固溶体经1000℃老化4 h后,比表面积为25.3 m2.g-1,孔容为0.21 cm3.g-1,经800℃还原处理3 h后储氧量为478.3μmol.g-1,显示了较高的比表面积和储氧能力的高温稳定性。