青藏铁路不同路基工程结构对路基裂缝的影响研究

针对青藏铁路某试验段加筋路堤和站场路基等不同路基工程 ,本文介绍了冻土路基的温度和变形的试验结果 ,分析了加筋路堤和站场路基不同路基工程的地温变化和变形特征 ,并论述了加筋路堤和加宽路基等不同工程结构对路基裂缝的影响     

超重力场电沉积NiW合金及其耐碱腐蚀性能

在超重力条件下电沉积NiW合金镀层,考察了超重力对NiW合金电沉积过程(各元素分电流、W含量和槽电压等)的影响规律;并利用扫描电子显微镜(SEM)、Tafel技术和电化学阻抗谱(EIS)技术研究了电沉积NiW合金镀层的表面形貌和在NaOH溶液中的抗腐蚀性能,同时通过浸泡实验考察了镀层的稳定性.结果发现,与常重力条件电沉积的NiW合金相比,超重力场电沉积的NiW合金中W含量增加,镀层表面无微裂纹产生;在10%(w)NaOH溶液中镀层自腐蚀电位正移,自腐蚀电流密度减小,腐蚀电阻也由常重力(重力系数G=1)时的865Ω·cm2增大至超重力(G=256)时的2305Ω·cm2;在10%NaOH溶液中浸泡144h后,超重力场电沉积的NiW合金表面无破碎和起皮现象发生.超重力技术在NiW合金电沉积过程中的应用,使镀层的耐碱腐蚀性能得到改善.     

Mechanical characterization of polytetrafluoroethylene polymer using full-field displacement method

The aim of this work is to estimate two important material properties of the polytetrafluoroethylene (PTFE) polymer by means of a single experimental test. The displacement fields around a crack tip are used for estimating the modulus of elasticity (or, Young's modulus) and Poisson's ratio. These parameters are evaluated by fitting linear fracture mechanic expression of displacement fields in the vicinity of the crack, for mode I, to the experimental data. Measurements of these displacements are carried out using digital image correlation (DIC) method. In this way, the experimental procedure is conducted by loading a double-edge-cracked plate specimen. In order to validate the results, two available experimental tests have been performed. The modulus of elasticity is determined by means of the tensile test, using a standard test machine. Moreover, the Poisson's ratio is obtained by measuring lateral compressive and longitudinal extensional strain using DIC method.     

Waterborne crackle decorative coatings and crack patterns

A preparation method of waterborne crackle decorative coatings was reported in this paper and the factors that influence crack patterns were investigated. The crackle coating consisted of a waterborne basecoat and a waterborne topcoat. The basecoat was made from two-component epoxy emulsion and the topcoat was made from fluorine-containing acrylic emulsion, silicone-acrylic emulsion or styrene-acrylic emulsion. Three junction types of crack patterns were prepared by the three top coatings, which were T-junction, Y-junction and mixed junction. T-junction type with long and straight cracks was prepared from styrene-acrylic emulsion 296DS. Y-junction type with curve and short cracks was prepared from fluorine-containing acrylic emulsion A603C and mixed junctions type was made from silicone-acrylic emulsion. Crack patterns with different spacing were prepared by controlling the thickness of topcoat, dryness of basecoat or conditions of film forming. The characterize methods of type and spacing for crack pattern were developed and properties of coating film including adhesion, water resistance, scrub resistance and so on were tested. The results showed that the crackle coatings possessed satisfactory properties for practical application.     

Vibration of nanobeams of different boundary conditions with multiple cracks based on nonlocal elasticity theory

The aim of this paper is to study the free vibration of nanobeams with multiple cracks. The analysis procedure is based on nonlocal elasticity theory. This theory states that stress at a point is a function of strains at all points in the continuum. The nonlocal elasticity theory becomes significant for small length scale in micro and nanostructures. The effects of nonlocality, crack location and crack parameter are investigated on the natural frequencies of the cracked nanobeam. In this study, analytical solutions are given for cracked Euler–Bernoulli nanobeams of different boundary conditions.     

Geometrical disorder of the fronts of a tunnel-crack propagating in shear in some heterogeneous medium

A statistical analysis of the deformation of the fronts of a tensile tunnel-crack propagating in fatigue in some medium with spatially varying Paris constant was recently performed, with special emphasis on the evolution of the power spectra and correlation functions of the fluctuations of the fronts around reference straight lines. This study is extended here to coplanar propagation (along a weak plane) of a tunnel-crack loaded in mode 2+3. The results are rather similar to those previously obtained for mode 1. In particular, just like for tensile loadings, there is an effect of gradual selection in time of Fourier components of the fluctuations of the fronts of large wavelength. One novelty, however, is that for shear loadings, the fronts no longer tend to become symmetrical in time, so that correlations between crack front fluctuations at two points are higher for points located on the same front than for points located on distinct ones.     

Cracking in D6ac steel

This paper examines the results of an extensive test program undertaken to study crack growth in D6ac steel and shows that in each case the increment in the crack length per cycle (da/dN) conforms to the Generalised Frost-Dugdale crack growth law. This is found to be true for both constant K_max, constant R ratio load increasing, and compression-compression pre-cracking tests in the L-T, T-L and the S-T directions.     

Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites

Fracture behaviour of polyethylene (PE)/Mg-Al layered double hydroxide (LDH) based nanocomposites has been studied by essential work of fracture (EWF) approach. Transmission electron microscopy (TEM and X-ray diffraction (XRD) analysis have been used to investigate the morphological features of these nanocomposites. A maximum in the non-essential work of fracture was observed at 5 wt.% LDH demonstrating enhanced resistance to crack propagation compared to pure PE. Morphological analyses of the nanocomposites show that the dispersed LDH platelets are partially exfoliated and also forms clusters with polymer chains remaining entrapped within. Rheological analyses show that the typical low-frequency Newtonian flow behaviour, as observed in unfilled polymer, shifts to shear-thinning behaviour with increasing LDH concentration. At 5 wt.% LDH a ductile-to-brittle transition has been observed. Fracture surface investigation by SEM reveals the arresting of the plastic crack growth by the LDH particle clusters, which is more significant at 5 wt.% LDH content. At higher LDH concentrations, the number of such particle clusters increases causing decrease in the average distance between them. As a result large-scale plastic deformation of the matrix at higher LDH concentration is effectively arrested favouring small strain failure and this in turn reaffirms the possible existence of a ductile-to-brittle transition. The study in general reveals that the resistance against crack initiation (essential work of fracture: EWF) and crack propagation (non-essential work of fracture: βw_p) in these nanocomposites are structurally correlated with the matrix behaviour and the morphology (state of LDH particle dispersion) respectively.     

在线振动监测与故障诊断的一种新途径

文中由应力强度因子导出含裂纹单元的刚度矩阵,从而提出了一种有限元法.将该法用于单边裂纹悬臂梁,计算了应变响应.用时域法识别了模态参数,并考虑了裂纹闭合的影响.分析了应变响应对故障的敏感度,计算结果表明,应变响应相对于位移响应而言,对故障更敏感.本文还提出了一种判别函数,该函数对于损伤检测,比现有几种判别函数更有效.最后,给出了一种在线振动监测与故障诊断新方法.