Homo and block copolymers of tert-butyl methacrylate by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of tert-butyl methacrylate (tBMA) was investigated using cuprous bromide with different ligands, solvents, deactivators, etc. The polymerization in bulk and diphenyl ether solvent system performed using Cu(I)Br complexed with N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA) catalyst in conjunction with 2-bromopropionitrile as an initiator at room temperature showed a curvature in the first-order kinetic plot. The controlled polymerization in methanol solution resulted in slower rate of polymerization and lower molecular weights. Well-defined diblock copolymers of PSt-b-PtBMA synthesized by polystyrene bromo macroinitiator (PSt-Br) with Cu(I)Cl/PMDETA catalyst system yielded predetermined molecular weights and lower polydispersities. Otherwise, the Cu(I)Br/PMDETA catalytic system showed an inefficient polymerization of tert-butyl methacrylate with lower molecular weights and higher polydispersities. Subsequent hydrolysis of the homopolymer refluxed in dioxane with addition of HCl afforded well-defined poly(methacrylic acid).     

Synthesis and characterization of amphiphilic triblock polymers by copper mediated living radical polymerization

2-Dimethylaminoethyl methacrylate (DMAEMA) and 2-diethylaminoethyl methacrylate (DEAEMA) block copolymers have been synthesized by using poly(ethylene glycol), poly(tetrahydrofuran) (PTHF) and poly(ethylene butylenes) macroinitiators with copper mediated living radical polymerization. The use of difunctional macroinitiator gave ABA block copolymers with narrow polydispersities (PDI) and controlled number average molecular weights (M_n’s). By using DMAEMA, polymerizations proceed with excellent first order kinetics indicative of well-controlled living polymerization. Online ¹H NMR monitoring has been used to investigate the polymerization of DEAEMA. The first order kinetic plots for the polymerization of DEAMA showed two different rate regimes ascribed to an induction period which is not observed for DMAEMA. ABA triblock copolymers with DMAEMA as the A blocks and PTHF or PBD as B blocks leads to amphiphilic block copolymers with M_n’s between 22 and 24 K (PDI 1.24-1.32) which form aggregates/micelles in solution. The critical aggregation concentrations, as determined by pyrene fluorimetry, are 0.07 and 0.03 g dm⁻¹ for PTHF- and PBD-containing triblocks respectively.     

BLUE LIGHT-EMITTING COIL-ROD-COIL BLOCK OLIGOMERS WITH RIGID p-HEXAPHENYL AS CHROMOPHORE

The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b- poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP- EO3）, 8 （EOs-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by ^1H-NMR, 13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃ under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.     

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.     

Matrix isolation infrared studies of complexes formed between substituted phenols and trimethylamine

Infrared spectroscopy and matrix isolation technique have been used to study the 1 : 1 complexes formed between 2,4,5-trichlorophenol (TCP), pentachlorophenol (PCP) or 2-chloro-4,6-dinitrophenol (CNP) and trimethylamine (TMA) isolated in solid argon. The results were analyzed in relation to the type of complex formed. Depending on the proton-donor ability of the phenol three different types of hydrogen bonded complexes have been identified in argon matrices. The weakest phenol in the series, TCP (pK_a = 6.72), forms a strong molecular hydrogen bonded complex with TMA as indicated by the broad ν(OHN) absorption with a maximum at 2490 cm⁻¹ and a band at 811 cm⁻¹ due to the ν_s(C₃N) mode of the perturbed amine. The strongest phenol, CNP (pK_a = 2.01), interacts with TMA in an argon matrix to form ionic complex with the proton transferred to the base molecule. This is evidenced by the presence of the ν(NH⁺---O⁻) absorption between 3000−1800 cm⁻¹, by the ν_as(C₃N⁺) and ν_s(C₃N⁺) absorptions due to the protonated amine and by numerous product bands due to the relatively strongly perturbed modes of the phenol ring. The interaction between TMA and a phenol of intermediate strength, PCP (pK_a = 4.74), in solid argon probably leads to the formation of two types of hydrogen bonded complexes: an ionic complex with the proton transferred to the amine molecule and a pseudosymmetric one with the proton more or less equally shared between the phenol and amine molecules. In this case the protonic absorption consists of two broad features situated in the 3000–1600 cm⁻¹ and 950–400 cm⁻¹ regions due to the ν(NH⁺O⁻) and ν(OHN) modes, respectively.     

The phonon-assisted proton transfer between hydrazinium cations in (N2H5)2HMF6·2H2O (M∈{Ga, Al, Fe}) type compounds. FT IR and quantum theoretical study

FT IR spectra of a series of compounds with a general formula (N₂H₅)₂HMF₆·2H₂O (where M∈{Ga, Al, Fe}) were recorded at variable temperatures (from ∼100 to 300 K, at 10 K intervals). The appearance of the spectral region of ν(N-N) modes due to hydrazinium cations further supports the conclusions regarding the N₂H₅⁺?H⁺?N₂H₅⁺ hydrogen bond potential well based on Raman spectroscopic data [J. Raman Spectrosc. 28 (1997) 315]. The appearance of two bands corresponding to the ν(N-N) modes in the low temperature FT IR spectra that merge into one upon heating is a clear evidence of a symmetric potential well through which a phonon-assisted proton transfer (PAPT) occurs at higher temperatures. Ab initio MP2/6-311++G(2d,p) quantum chemical study of the proton transfer potential within the N₂H₅⁺?H⁺?N₂H₅⁺ cluster confirmed its double-minimum character. The first-order saddle point found on the MP2/6-311++G(2d,p) potential energy hypersurface corresponds to a centrosymmetric structure (C_2h symmetry), with the proton placed at the inversion center. The potential energy curve along the tunnelling coordinate was calculated by the intrinsic reaction coordinate (IRC) methodology, leading to an adiabatic PT barrier height of 3.94 kcal mol⁻¹ and a tunneling rate of 1.98 s⁻¹. The corresponding MP4(SDTQ)/6-311++G(2d,p)//MP2/6-311++G(2d,p) value of the adiabatic PT barrier height is 4.26 kcal mol⁻¹.     

Investigations on the use of pneumatic cross-flow nebulizers with dual solution loading including the correction of matrix effects in elemental determinations by inductively coupled plasma optical emission spectrometry

The use of a so-called trihedral and a T-shaped cross-flow pneumatic nebulizer with dual solution loading for inductively coupled plasma optical emission spectrometry has been studied. By these devices analyte clouds from two solutions can be mixed during the aerosol generation step. For both nebulizers the correction of matrix effects using internal standardization and standard addition calibration in an on-line way was investigated and compared to elemental determinations using a conventional cross-flow nebulizer and calibration with synthetic standard solutions without matrix matching. A significant improvement of accuracy, both for calibration with internal standardization and standard addition, was obtained in the case of four synthetic solutions containing each 40 mmol L^− 1 Na, K, Rb and Ba as matrix elements and 300 μg L^− 1 Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb as analytes. Calibration by standard addition in the case of dual solution loading has been shown to be very useful in the determination of elements at minor and trace levels in steel and alumina reference materials. The results of analysis for minor concentrations of Cr, Cu and Ni in steel as well as for Ca, Fe, Ga, Li, Mg, Mn, Na, Si and Zn in alumina powder certified reference materials subsequent to sample dissolution were found to be in good agreement with the certificates. Limits of detection were found to be only slightly above those for a conventional cross-flow nebulizer and a precision better than 3% was realized with both novel nebulizers.     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.