Cu-Al-Be形状记忆合金湿磨粒磨损性能研究

采用销-盘式二体磨损试验研究了CuAlBe形状记忆合金的湿磨粒磨损行为．结果表明，CuAlBe形状记忆合金的磨损性能不完全取决于材料硬度，具有热弹性马氏体组织的A合金的抗磨性优于高硬度B合金．在湿磨粒磨损条件下，A合金具有β′1 β双相组织，在磨粒的交变应力作用下，由于β相应力诱发马氏体相变、β′1相马氏体变体择优取向并产生形状记忆效应，使应变弹性回复，并钝化裂纹尖端，使得A合金具有优良的抗磨粒磨损性能．     

氧化锌掺铝绒面薄膜在有机光伏电池中的应用

目前有机光伏电池的吸光活性层电学传输特性和光学吸收特性的不匹配是制约其能量转换效率提升的主要原因之一. 通过陷光结构对入射光进行调控, 提高电池对光的约束和俘获能力从而达到“电学薄”和“光学厚”的等效作用, 是解 决有机光伏电池电学和光学不匹配的有效手段. 本文采用湿法刻蚀技术获得了系列时间梯度的绒面氧化锌掺铝薄膜, 并将其作为有机光伏电池的入射陷光电极, 显著增强了电池的光学吸收. 研究发现, 当使用浓度0.5%的稀HCL腐蚀30 s后的氧化锌掺铝薄膜作为入射电极后, 电池的光电性能和效率显著增强. 基于此绒面电极电池的电流密度比平面结构的电池提高了8.17%, 效率改善了11.29%. 通过对绒面电极表面的修饰处理, 实现了电极与光活性层之间良好的界面接触, 从而减小了对电池的开路电压和填充因子的影响.     

Ultrasonic‐assisted Synthesis of Fe Nanoparticles in the Presence of Poly(N‐vinyl‐2‐pyrrolidone)

Zero‐valent iron particles were prepared by wet reduction chemistry assisted with ultrasonic treatment. Such prepared particles have uniform size, exhibit crystalline structure and show strong paramagnetic property. Their surface modification by coating poly(N‐vinyl‐2‐pyrrolidone) (PVP) was investigated. The resulting Fe(0)‐PVP particles were monodispersed and possessed enhancing magnetization saturation. Those synthesis conditions to control the particle size and distribution were exploited.     

黄土高原中部秋季干湿的年际和年代际环流异常特征及与海温的多尺度相关性研究

黄土高原地区作为气候敏感区和生态脆弱区地表干 湿状况的年际和年代际变化特征十分明显. 但以往主要是针对夏季进行分析, 而对黄土高原秋季干湿变化规律及大气环流机理的认识非常有限. 本文基于中国589站最近50 a (1961–2010年)月降水和气温月平均资料、NCEP/NCAR提供的再分析资料以及NOAA提供的海表温度(Sea Surface Temperature, SST) 资料, 运用带通/低通滤波、小波分析、EOF/REOF和回归分析等方法, 在对中国秋季干湿时空演化分类的基础上, 通过研究秋季黄土高原中部干湿演变周期、大气环流特征及与海温的多尺度相关关系, 以揭示影响黄土高原中部秋季干湿变化的物理机理, 并确定影响该区域干湿状况的前兆信号. 小波功率谱分析表明, 黄土高原中部秋季干湿指数存在准4 a和准8 a的周期, 1970–1990年准8 a尺度周期振荡尤为明显. 年际(周期≤ 8 a) 尺度上偏湿年的大气环流特征是, 欧亚大陆中高纬呈“双阻型”, 200 hPa西风急流显著北移, 日本海-鄂霍茨克海受反气旋控制, 其底部的偏东水汽输送带将水汽输入研究区. 年代际(周期 > 8 a)尺度上偏湿年的大气环流特征是, 东亚大陆为一致的低值系统; 200 hPa东亚副热带西风急流减弱北移, 研究区主要水汽来源由经孟加拉湾在中南半岛转向的南风水汽输送及中纬度的西风水汽输送组成. 整个序列上, Nino3区SST指数(Nino3I)超前5个月与秋季干湿指数已呈显著的负相关关系, 而孟加拉湾–中国南海SST指数(BayI)则超前3个月与干湿指数呈现显著的负相关关系. 年际尺度上, 秋季Nino3I, BayI均与秋季干湿指数存在显著相关(准4 a, 4–6 a), 而年代际尺度上, 只有BayI与秋季干湿指数存在显著相关性(准10 a). 黄土高原中部秋季干湿的年际和年代际周期的确定、大气环流异常特征的认识及与海温的多尺度相关关系的建立, 不仅揭示了影响该区域干湿变化的物理机理, 也为干旱气候预测提供了重要的前兆信号. 关键词： 黄土高原中部 干湿特征 海表温度 小波分析     

表面润湿法合成β沸石体系中晶种作用的研究

系统研究了表面润湿法合成β沸石的体系中,干晶种、润湿态晶种、异晶晶种(Y沸石、ZSM 5沸石)以及碱处理β沸石晶种在此晶化体系中的作用.采用β沸石产品及异晶作晶种时,可使产品的相对结晶度稍有提高,但对沸石微晶核的结构导向作用不明显.经浓碱液处理20min后的β沸石产品(碱处理晶种)作晶种引入晶化体系后,可以显著提高产品的相对结晶度,降低模板剂的用量,缩短晶化诱导期,成为表面润湿法合成β沸石体系的有效晶种形式.     

VISCOUS FORCES BETWEEN TWO SPHERES COLLIDING THROUGH INTERSTITIAL POWER-LAW FLUID

Interaction between two spheres with an interstitial fluid is essential in Discrete Element modeling for simulating the behaviors of ‘wet‘ particulate materials. In this paper the interaction between two spheres with an interstitial Power-law fluid was approximately resolved as normal and tangential interactive models respectively, for which the governing equations were simplified on the basis of Reynolds approximation. These equations were then solved analytically together with the boundary conditions to obtain the pressure distributions for each individual model, and event ually solutions of the viscous squeeze force and the tangential viscous resistance were obtained, which provide a set of solutions for implementing into DEM code or other purposes.     

ZnO/MoO3 mixed oxide nanotube: A highly efficient and stable catalyst for degradation of dye by air under room conditions

As a continuation of our work to develop catalysts with high activity for catalytic air wet oxidation process under mild conditions, degradation of wastewater containing 0.3 g/L Safranin-T (ST) by air oxidation over ZnO/MoO₃ nanotube catalyst was studied. It was found the decolorization efficiency and the chemical oxygen demand (COD) removal of ST reached above 98% and 95%, respectively, within 18 min at room temperature and atmospheric pressure. And the organic pollutants were totally mineralized to simple inorganic species such as HCO₃⁻, Cl⁻ and NO₃⁻, while the total organic carbon (TOC) decreased 99.3%. The structure and morphology of the catalyst after ten cycling runs showed that the catalyst was stable under such operating condition and the leaching test showed negligible leaching effect. This ZnO/MoO₃ nanotube is proved to be an active and stable heterogeneous catalyst in CWAO of ST under extremely mild conditions.     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Implementation of Morse–Witten theory for a polydisperse wet 2D foam simulation

The Morse–Witten theory provides a formulation for the inter-bubble forces and corresponding deformations in a liquid foam, accurate in the limit of high liquid fraction. Here we show how the theory may be applied in practice, including allowing for polydispersity in the bubble sizes. The resulting equilibrated 2D structures are consistent with direct calculations, within the limitations of the theory. The path to developing a 3D model is outlined for future work.     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。