催化湿式氧化中铜基催化剂的流失与控制

 制备了催化湿式氧化处理有机废水用铜基催化剂，并用XRD，XRF和TG－DTG等手段对催化剂进行了表征，对催化剂及其前驱体的组成和结构进行了分析鉴定．结果表明，由类水滑石结构的前驱体焙烧得到的催化剂Cu－Al－Zn－O，其活性组分铜的流失得到了控制；在氧化降解苯酚、十二烷基苯磺酸钠和磺基水杨酸时，在初始氧分压0．5MPa和160～220℃的反应条件下，催化剂活性组分铜的流失量小于0．3mg／L．对催化剂活性组分不易流失的原因进行了理论解释和计算．     

MgO、Al_2O_3、SiO_2催化剂上湿天然气中乙烷氧化脱氢的研究(英文)

研究了ＭｇＯ、Ａｌ２Ｏ３、ＳｉＯ２催化剂对湿天然气中乙烷氧化脱氢反应的影响，发现ＭｇＯ对乙烷脱氢有较好的活性，７００Ｃ时，Ｃ２Ｈ４选择性达４１．８５％，收率达１８．７５％。考察了催化剂酸碱性对反应的影响，适当碱性的催化剂有利于反应的进行，催化剂活性顺序与碱性大小顺序相一致为ＭｇＯ＞Ａｌ２Ｏ３＞ＳｉＯ２。催化剂活性顺序与其晶格氧流动性有顺应关系。     

A mass conservative well‐balanced reconstruction at wet/dry interfaces for the Godunov‐type shallow water model

This paper presents a novel mass conservative, positivity preserving wetting and drying treatment for Godunov‐type shallow water models with second‐order bed elevation discretization. The novel method allows to compute water depths equal to machine accuracy without any restrictions on the time step or any threshold that defines whether the finite volume cell is considered to be wet or dry. The resulting scheme is second‐order accurate in space and keeps the C‐property condition at fully flooded area and also at the wet/dry interface. For the time integration, a second‐order accurate Runge–Kutta method is used. The method is tested in two well‐known computational benchmarks for which an analytical solution can be derived, a C‐property benchmark and in an additional example where the experimental results are reproduced. Overall, the presented scheme shows very good agreement with the reference solutions. The method can also be used in the discontinuous Galerkin method. Copyright © 2016 John Wiley & Sons, Ltd.     

Influence Du Rapport Atomique Ca/P Initial Sur La Synthèse Sous Atmosphère Humide D’apatite

Abstract

Le comportement sous atmosphère humide des mélanges initiaux de la calcite et du di-ammonium hydrogénophosphate à différents rapport atomique (Ca/P)_initiala été étudié. L’analyse par diffraction des rayons X (DRX) montre que les produits obtenus ont tous une structure apatitique. Il montre la présence à côté de celle de l’apatite, des raies identifiables à la calcite pour des rapports atomiques initiaux supérieurs à 1.50. Par ailleurs, la spectroscopie d’absorption infrarouge (IR) révèle dans les différents cas, la présence autre que les bandes attribuables aux ions PO₄ ^3?dans une apatite, des bandes à 875 cm^?1caractéristique des groupements HPO₄ ^2?dans une apatite déficiente en ion calcium. De même, le traitement thermique à 1000°C des poudres synthétisés a mis en évidence que les apatites formées sont non st?chiométriques. Les analyses chimiques montrent, par ailleurs, que lorsque le rapport atomique Ca/P du mélange initial est inférieur à 1.50, l’apatite formée a un rapport atomique Ca/P égal à 1.58. Par contre, lorsque le rapport Ca/P initial est supérieur à 1.50, le produit formé est biphasique et a un rapport atomique Ca/P de 1.62. Ce rapport est dû essentiellement à la présence d’un excès de CaCO₃dans le mélange initial (DRX, IR).

Mots clés Apatite; atmosphère humide; calcite; hydrothermal; synthèse

Abstract The behavior, in a humid atmosphere, of the initial mixtures of calcite and diammonium hydrogenophosphate at different atomic ratio (Ca/P) was studied. The X-ray diffraction (XRD) analysis shows that all the products obtained have apatite structure. For initial atomic ratios greater than 1.50, the XRD analysis shows the presence of reflections different from those of apatite, which may be attributed to calcite. Analysis by infrared (IR) absorption spectroscopy allows to distinguish between the two cases: in addition to the presence of bands due to the PO₄ ^3?ions in apatite further bands at 875 cm^?1characteristic of HPO₄ ^2?in apatite deficient with respect to calcium ions are observed. Similarly, the powders synthesized by heat treatment at 1000°C showed that nonstoichiometric apatites are formed. Chemical analyses show, that when the atomic ratio Ca/P of the initial mixture is less than 1.50, the apatite formed has an atomic Ca/P ratio of 1.58. When the initial Ca/P ratio is greater than 1.50, the product formed is biphasic and has an atomic ratio Ca/P of 1.62. This result is mainly due to the presence of an excess of CaCO₃in the original mixture (XRD, IR).     

Acidified,Wet, Silica-Supported Tetrabutylammonium Periodate: A Convenient and Mild Reagent for Conversion of Thioamides to Their Corresponding Amides Under Solvent-Free Conditions

A series of thioamides are transformed to their corresponding oxo analogues in good to excellent yields with acidified, wet, silica-supported tetrabutylammonium periodate under solvent-free conditions.     

A Preliminary Study on Preparation of the Aromatic/Aliphatic Co‐polyurea as Spun Fibers

Aromatic‐aliphatic co‐polyurea has been synthesized from 4,4 prime‐diphenylmethane diisocyanate (MDI), m‐phenylene diamine (m‐PDA), and 1,6‐diaminohexane (HDA) in DMAc by solution polymerization. The chemical structure of the co‐polyurea has been characterized by ¹H‐NMR. The thermal properties of the copolymers were measured by DSC and TGA. The co‐polyurea solutions were spun into fibers by means of wet spinning. The effects of coagulation conditions on the morphologies and mechanical properties of the co‐polyurea as spun fibers are discussed.     

A Facile Preparation of the Co3O4 Villiform Nanostructure

A Co₃O₄ villiform nanostructure was prepared by the aid of the cobalt oxalate precursor and characterized with x-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscopy (SEM) and UV-vis spectrum. It is found that the villiform structure obtained consists of Co₃O₄ nanorods with diameters of 50–80 nm. Moreover, the UV-vis absorptions of the villiform Co₃O₄ show the apparent blue shifts by comparison with the bulk Co₃O₄, indicating a quantum size effect similar to the free Co₃O₄ nanoparticles.     

湿式催化氧化处理含高浓度甲醛的草甘膦废水

草甘膦结晶母液经蒸发或纳滤浓缩回收后,产生大量含有高浓度甲醛的废水,常规的废水处理方法难以达到回用或排放要求.以过量溶液浸渍法制备的Pt-Bi-CeO2/AC为催化剂,采用湿式催化氧化法处理2.5%的HCHO溶液,HCHO去除率高达99.9%以上,COD去除率达到96.6%.采用Pt-Bi-CeO2/AC催化剂对含低浓度草甘膦(PMG,50 mg/L)的生产废水直接进行湿式催化氧化处理,催化剂使用23次后,HCHO去除率稳定在85%左右,COD去除率稳定在87%左右,催化剂具有良好的稳定性.湿式催化氧化处理后的废水可直接回用于PMG生产.采用固定床湿式催化氧化装置处理HCHO溶液以及PMG生产废水,处理效果也非常理想,连续使用720 h,催化剂的稳定性能良好.通过XRD、N2吸附-脱附、HRTEM、ICP-OES和XPS等分析手段对催化剂进行了系统表征.     

Wet-Chemically Prepared Porphyrin Layers on Rutile TiO2(110)

Porphyrins are large organic molecules that are interesting for different applications, such as photovoltaic cells, gas sensors, or in catalysis. For many of these applications, the interactions between adsorbed molecules and surfaces play a crucial role. Studies of porphyrins on surfaces typically fall into one of two groups: (1) evaporation onto well-defined single-crystal surfaces under well-controlled ultrahigh vacuum conditions or (2) more application-oriented wet chemical deposition onto less well-defined high surface area surfaces under ambient conditions. In this study, we will investigate the wet chemical deposition of 5-(monocarboxyphenyl)-10,15,20-triphenylporphyrin (MCTPP) on well-defined rutile TiO₂(110) single crystals under ambient conditions. Prior to deposition, the TiO₂(110) crystals were also cleaned wet-chemically under ambient conditions, meaning none of the preparation steps were done in ultrahigh vacuum. However, after each preparation step, the surfaces were characterized in ultrahigh vacuum with X-ray photoelectron spectroscopy (XPS) and the result was compared with porphyrin layers prepared in ultrahigh vacuum (UHV) by evaporation. The differences of both preparations when exposed to zinc ion solutions will also be discussed.