基于界面跟踪方法的汽蚀模型和算法的有效性验证

针对两相附着汽蚀流动机理,基于界面跟踪方法发展了新的汽蚀模型和算法。所发展的汽蚀模型和算法不仅考虑了液相／气相界面处的压力差,而且考虑了耦合Reynolds-Averaged Navier-Stokes方程求解技术得到的流场压力梯度信息来迭代计算附着汽蚀形状。采用具有试验数据的半球形头部圆柱体汽蚀绕流作为算例来验证所提出的汽蚀模型和算法的有效性。采用不同的网格数和松弛因子数值验证了发展的汽蚀模型和算法的有效性。三种汽蚀数下的数值计算结果得到的压力系数分布与试验数据完全吻合。结果表明所提出的汽蚀模型和算法能够准确模拟出汽蚀发生点和汽蚀长度。     

Antiplane time-harmonic green’s functions for a circular inhomogeneity with an imperfect interface

Two-dimensional antiplane time-harmonic Green’s functions for a circular inhomogeneity with an imperfect interface are derived. Here the linear spring model with vanishing thickness is employed to characterize the imperfect interface. Explicit expressions for the displacement and the stress fields induced by time-harmonic antiplane line forces located both in the unbounded matrix and in the circular inhomogeneity are presented. When the circular frequency approaches zero, our results reduce to those for the static case. Numerical results are presented to show the influence of the frequency and the imperfection of the interface on the stress and displacement fields.     

各向异性接合材料界面端部场数值分析

为了求解各向异性接合材料界面端部奇异性应力场,建立了一种新型杂交元模型.该模型的独特之处在于:基于有限元特征法得到的奇异性场数值特征解建立了一种新型界面端奇异单元.通过算例证明,新型杂交元模型能够利用较少的单元数获得较为精确的数值结果.当前模型应用范围广泛,能够用于复杂结构的界面端部场求解.     

Design considerations and an example of application of an in-house made TG-MS interface

The design, the abilities and a characteristic application of an in-house made interface for combining thermogravimetry (TG) with mass spectrometry (MS) are presented. The TG-MS interface consists mainly of three co-axial tubes. The position of the intermediate tube was determined after calculation of the temperature profile at the TG furnace exit tube. The inner tube position was determined taking into consideration its protection against condensation of heavy molecules and the time delay for the transfer of the evolved gases. This interface allows either continuous sampling and transferring of the evolved gases from the TG to the MS or repetitive introduction of short sampling pulses of TG evolved gases to MS. The interface is capable of coupling various commercial instruments. In the present work two configurations of this interface are demonstrated. Finally an example of application of this interface on forest fuel pyrolysis is presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

固—液界面阴离子集团构型的密度泛函理论研究

通过键合不同数量的H2PO4^-离子构造了H4P2O8^2-和H4P4O16^8-两种阴离子集 团。利用密度泛函理论对它们的构型进行优化并计算其振动频率和喇曼散射效率。 测量了固—液界面边界层的喇曼光谱并与理论计算结果进行对比分析，进一步研究 了阴离子集团的结构、聚合及脱水等过程。实验和理论研究均表明阴离子二聚体是 KDP晶体的生长基元，他们在固液界面将进一步形成多聚体分子集团，而离子集团 的脱水过程则发生在距KDP晶体表面约50μm的固—液界面边界层中。随着生长层向 界面的推进，这些分子集团将变得越来越有序。本文的研究结果对确定晶体生长界 面动力学过程、发展和完善晶体生长理论有重要意义。     

尖晶石锂锰氧化物锂离子嵌脱过程的交流阻抗谱研究

用粉末微电极研究了尖晶石锂锰氧化物在不同嵌锂状态下嵌脱锂过程的交流阻 抗图谱，提出了新的等效电路模型。描述锂离子在固体中扩散的Warburg阻抗与累 积或消耗的嵌入电容在Lix MnO4中的x≤0．5时串联，0．5＜x≤1时并联。用提出 的等效电路模型分阶段拟合了实验所得的交流阻抗谱，拟合值与实验值相当吻合， 由拟合结果得到不同电位下锂离子在表面膜中的迁移电阻和电容，界面电荷传递电 阻，双层电容，锂离子在固体中扩散系数和累积或消耗的嵌入电容。     

薄层液/液界面电子转移动力学的研究进展

薄层循环伏安法是研究液/液界面电荷转移的一种新方法,具有简单、快速、易操作的优点。文章回顾了液/液界面电化学的发展历史,介绍了薄层法的实验原理,对其在电化学中的应用和研究进展进行了评述,总结了界面驱动力与电子转移速率的关系。     

表面能与晶体生长/溶解动力学研究的新动向

界面现象使物质在结晶过程中出现了临界现象.但最近的研究指出在物质溶解过程中,在表面能量的控制下也存在着临界现象以及尺寸效应.实验发现,当晶体自身小到一 定的程度时(通常在纳米尺度上并和临界蚀坑的大小相近),在溶解过程中其速度会自发降 低,反应被抑制乃至停止.尽管在热力学上表面能的因素可以赋予小颗粒晶体较大的溶解度 ,但表面能却也能通过对临界条件的控制而使这些微粒在动力学上不被溶解.这个发现不仅 解决了纳米颗粒在水溶液中稳定性的问题,而且还从动力学的角度解释了生物矿物选择纳米 尺度作为其基本构成单元的原因.由于表面能和晶体生长/溶解的动力学有着密切的关系, 我们可以通过对表面能的调节来修改它们的动力学速度和晶体的形貌.反过来,也可以用动力学的方法来测定表面能及表面吸附/脱附常数等.相对于常规的界面研究手段,通过生 长和溶解动力学途径所得的数据有着很好的可靠性及重复性.我们认为,晶体生长和溶解的 动力学和表面能的研究相结合,不仅为界面研究提供了新的思路和方法,而且也会推动晶体生长和材料科学的发展.     

Molecular simulation of water behaviors on crystal faces of hydroxyapatite

The water behavior on (001) and (100) crystal faces of hydroxyapatite (HAP) were studied using molecular dynamics (MD) simulations. The study showed that the water molecules between the HAP faces were under conditions of strong electrical field and high pressure, and hence formed 2–3 well-organized water layers on the crystal surfaces. These structured water layers had ice-like features. Compared with the crystallographic [100] direction of HAP, the polarity along the [001] direction was stronger, which resulted in more structured water layers on the surface. The interaction of water molecules with the calcium and phosphate sites at the HAP-water interface was also studied. The results indicated the multiple pathways of water adsorption onto the HAP surfaces. This study revealed the formation and the detailed structure of water layers on HAP surfaces and suggested that the interfacial water played an important role in stabilizing the HAP particles in aqueous solutions. Translated from Chinese Journal of Inorganic Chemistry, 2006, 22(8): 1392–1400 (in Chinese)