KNbO3：Fe晶体的时间微分效应及图像追踪

本文观察到了KNbO_3:Fe晶体的时间微分效应,并用这个微分效应进行了图像追踪的演示,为KNbO_3:Fe晶体在光折变器件领域的应用进行了有益的探索。     

A method for determining optical constants, dimensions, and concentrations of “soft” absorbing particles in the brightening band region

We investigate the possibilities of creating a method for estimating the optical constants, dimensions, and concentrations of “soft” absorbing particles by applying a theoretical analysis of the angular dependence of the intergrated indicatrix, overall characteristics of light scattering, and absorption on the phase shift and diffraction parameter of particles in the brightening band region. We show that using the investigated optical characteristics, it is possible to determine the unknown parameters of a suspension from experimental data. Institute of Biophysics, Siberian Branch of the Russian Academy of Sciences, Akademgorodok, Krasnoyarsk, 660036, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 807–812, November–December, 1997.     

采用级联原子滤光器的新型卫星激光链路系统研究

提出级联佛克脱型原子滤光器(Linked VADOF)的新构想。从理论上分析并计算了级联佛克脱型原子滤光器的透射谱。结果表明，级联佛克脱型原子滤光器将佛克脱型原子滤光器的多峰改造为单峰结构，具有比佛克脱型原子滤光器更窄的线宽和更高的噪声抑制比。将这种新型结构应用于激光信标锁频。该锁频方案提高了信标光频率的稳定性。在此基础上，给出了发射端采用级联佛克脱型原子滤光器锁频，接收端采用法拉第型原子滤光器(FADOF)滤光的新型卫星激光链路系统。外场初步联调实验表明了该系统的可行性。     

飞秒激光脉冲在三能级有机分子介质中传播时的频谱分析

通过采用预估校正的时域有限差分法求解麦克斯韦-布洛赫方程,我们研究了飞秒激光脉冲在三能级有机分子(4,4-二甲氨基二苯乙烯分子)介质中传播时脉冲的频谱演化情况.在单光子共振情况下,即入射脉冲频率等于1、2能级之间的共振频率,对大面积入射脉冲,由于强的二次激发的作用,电场频谱中出现了在ω32附近振荡的频率成分,ω32是2、3能级之间的共振频率,说明对大面积入射脉冲二能级模型已经失效,需要采用多能级模型来描述分子介质.在双光子共振情况下,即入射脉冲频率等于1、3能级之间的共振频率的一半,由于介质中放大的自发辐射和四波混频的作用,部分入射脉冲能量转化为高频和低频电场成分的能量,分子介质表现出了很强的光功率限幅特性.     

一种自制的蒸馏水器保护装置

本装置由检测、控制、执行、报警和电源五部分组成。检测部分采用了靠正常水位导通的两根信号线。当蒸馏水器在正常运行时遇停水,本装置可立即实现断电保护,同时发出声光报警,有效防止干烧,杜绝事故发生。本装置制作简便,元器件均为市售,成本低廉,性能可靠。     

Comparison of procedures for correction of matrix interferences in the multi-element analysis of soils by ICP-AES with a CCD detection system

Three procedures, matrix matching, plasma optimisation and single-point standard-addition, have been evaluated to ascertain the best procedure for simultaneous multi-element analysis of industrial soils by ICP-AES with CCD detection. A standard reference material, CRM143 from the Bureau Communautaire de Réference (BCR), has been analysed for Cd, Cr, Cu, Mn, Ni and Pb using the three different matrix interference correction procedures. All three procedures give comparable results which are in good agreement with the BCR values, except for Cr. The single-point standard addition procedure was chosen, on the basis of economy and ease of implementation, to correct for matrix interferences in the determination of Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sn and V in soil samples collected from an industrial site in England. Concentrations of some of the elements were found to vary greatly with sampling depth. For example, the concentration of Mn, determined using the atomic line at 279.920 nm, increased from 426 ± 3 g/g at a depth of 18–28 cm to 5996 ± 144 g/g at 60–85 cm.     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

8-羟基喹啉对甲基苯酚合锌配合物的合成及光致发光和电致发光性能

有机电致发光 ( EL )技术作为一种有着广阔应用前景的显示技术 ,自 1 987年 [1] 以来已获得了空前迅速的发展 .部分发光器件的亮度、效率和寿命已经达到或接近实用化的程度 .许多有机化合物 [2～ 5] ,包括小分子和聚合物 ,已被用于制备有机 LEDs.应用于有机 EL的化合物很多 ,这为优化和筛选优秀的 EL材料提供了基础 .以 8-羟基喹啉铝为代表的有机金属配合物是一类重要的有机 EL材料 ,这类材料荧光效率高、易于提纯且性质比较稳定 .目前应用于有机 EL金属配合物的发光材料大多配位数均为偶数 ,四配位的 8-羟基喹啉锌配合物 ( Znq2 ) [6…     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.     

氧化钨薄膜微型电化学器件的研究

本文论述了WO_3薄膜氢离子敏器件的结构、原理、制备技术和测试分析。利用WO_3薄膜在H+溶液中由绝缘转化为导电特性,成功地研制成氢离子敏器件。这是一种简易而经济的微型pH敏器件技术。