载银磷酸活化剑麻基活性炭纤维的抗菌性能研究

本文利用磷酸化方法，制备各种剑麻基活性炭纤维，并利用活性炭纤维的氧化还原特性及吸附性能，在其上负载金属银，研究并比较了这些载银活性炭纤维对大肠杆菌和金黄色葡萄球菌的杀灭作用，结果表明，磷酸浓度，活化方法，活化时间，纤维的比表面积等因素的均对材料的抗菌性能有一定的影响，磷酸活化的活性炭纤维表现出强的抗菌杀菌能力，高浓度磷酸活化后的纤维抗菌能力有所提高，并且抗菌能力随活化时间的延长而增加，抗菌前后纤维上负载的银未曾大量脱落，经5次抗菌试验后材料仍显示出很强的抗菌能力。     

Chromatographic performance of deuterated solvents in reversed phase micro high performance liquid chromatography

The chromatographic performance of the deuterated solvents, CD₃OD and D₂O, has been investigated in reversed-phase micro high performance liquid chromatography. The chromatographic performance of CD₃OD is only slightly superior to that of CH₃OH. However, the performance of D₂ is significantly superior to that of H₂O, separation of aromatics being improved by about 30%. D₂ is a particularly powerful solvent for the separation iof deuterated and non-deuterated compounds.     

Active nickel-based reduction of organic compounds

The reducing system NiCl₂·2H₂O—Li—arene_cat (cat is catalyst) was proposed for use to reduce a wide range of organic compounds, including alkenes, alkynes, carbonyl compounds, imines, halogenated derivatives, sulfonates, aromatic compounds, hydrazines, azo and azoxy compounds, N-oxides, and nitrones. The degree of reduction can be controlled for some substrates. Deuterium can be incorporated in the reaction products using nickel chloride deuteriohydrate. Nitrones, N-alkoxyamides, and acyl azides are also reduced with the Li—arene_cat system containing no nickel salt.     

Acid-catalyzed attack of the dinitrogen ligand in thecis-(Me2PhP)4Mo(N2)2 andtrans-(Ph2PCH2CH2PPh2W(N2)2 complexes by nitronium and nitrosonium cations with the formation of nitrogen oxides

The interaction of labeled dinitrogen complexescis-(Me₂PhP)₄Mo(¹⁵N₂)₂ andtrans-(dppe)₂W(¹⁵N₂)₂ with non-labeled nitronium and nitrosonium fluoroborates,¹⁴NO₂BF₄ and¹⁴NOBF₄, in sulfolane at room temperature in the presence of H₂SO₄ results in rapid formation of labeled nitrous and nitric oxides (¹⁵N¹⁴NO,¹⁵NO), as well as¹⁵N¹⁴N. The yield of the products depends on the reagent ratio and reaches 10–20 mol. % per mole of a complex under optimum conditions. The mechanism of the reactions found is proposed. It involves the step of protonation of the dinitrogen ligand to form the corresponding hydrazido(2–) derivatives, which are then attacked by nitronium or nitrosonium cations. In accordance with the mechanism proposed, it was established that the hydrazido(2–) complexes, (Me₂PhP)₃Mo(¹⁵N₂H₂)Cl₂ and (dppe)₂W(¹⁵N₂H₂)Cl₂, are capable of forming¹⁵N¹⁴NO,¹⁵NO, and¹⁵N¹⁴N under the action of¹⁴NO₂BF₄ and¹⁴NOBF₄ in the absence of an acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 13–13, July, 1995.     

Protein secondary structure and stability determined by combining exoproteolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the post-genomic era, several projects focused on the massive experimental resolution of the three-dimensional structures of all the proteins of different organisms have been initiated. Simultaneously, significant progress has been made in the ab initio prediction of protein three-dimensional structure. One of the keys to the success of such a prediction is the use of local information (i.e. secondary structure). Here we describe a new limited proteolysis methodology, based on the use of unspecific exoproteases coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), to map quickly secondary structure elements of a protein from both ends, the N- and C-termini. We show that the proteolytic patterns (mass spectra series) obtained can be interpreted in the light of the conformation and local stability of the analyzed proteins, a direct correlation being observed between the predicted and the experimentally derived protein secondary structure. Further, this methodology can be easily applied to check rapidly the folding state of a protein and characterize mutational effects on protein conformation and stability. Moreover, given global stability information, this methodology allows one to locate the protein regions of increased or decreased conformational stability. All of this can be done with a small fraction of the amount of protein required by most of the other methods for conformational analysis. Thus limited exoproteolysis, together with MALDI-TOF MS, can be a useful tool to achieve quickly the elucidation of protein structure and stability.     

Detection and assessment of citrus tristeza virus antigens by computer-aided scanning densitometry

Citrus tristeza virus (CTV) extracted from Etrog citron (C.medica L.) was immunoprecipitated. The immunoprecipitate was fractionated by SDS-PAGE and western blotted onto nitrocellulose. The CTV antigens were determined by immunoblot analysis using rabbit anti-CTV IgG, and the protein-band pattern exhibited on the nitrocellulose was assessed by soft-laser scanning densitometry. The densitometric tracing revealed the presence of bands that were not visible to the naked eye. Using the superimposition mode of the instrument, it was also revealed that the protein-band patterns of different CTV samples were not identical. Computer-aided soft-laser scanning densitometry proved to be a powerful approach in the detection and assessment of protein bands revealed on nitrocellulose immunoblots, which we were previously unable to do employing conventional methods.     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

LBL分子沉积法制备葡萄糖氧化酶电极

采用以静电力为主的逐层分子交替沉积技术制备葡萄糖氧化酶（GOD）电极.通过带有正电荷的聚二甲基二烯丙基铵盐酸盐（PDDA）和带有负电荷的GOD交替沉积在修饰有3-巯基-1-丙基磺酸钠（MPS）的金电极表面.以甲酸二茂铁为电子媒介体,用循环伏安法检测GOD电极对葡萄糖的响应.结果表明,当GOD电极组装层数小于4时,电流响应随着层数的增加而增大,超过4层时电流响应减小.其中4层GOD修饰电极的线性范围为0.55～6.63 mmol•L－1,当pH为7.0时,响应最大.同时电极的检测重现性能良好,相对标准偏差为2.4％.     

超高效液相色谱-三重四极杆质谱法测定血浆和尿液中马桑亭和马桑宁

建立了超高效液相色谱-三重四极杆质谱联用技术测定血浆和尿液中马桑中毒标志物马桑亭和马桑宁的方法。血浆和尿液样品经固相支持液液萃取法提取净化后，溶于15%（v/v）甲醇水溶液中，以Cortecs C₁₈色谱柱（100 mm×2.1 mm，1.6 μm）作为分析柱进行分离，电喷雾负离子多反应监测（MRM）模式下检测，以氟苯尼考作为内标物，基质工作曲线内标法定量。血浆和尿液中马桑亭和马桑宁的平均加标回收率为86.2%~110%，相对标准偏差为5.1%~14.6%（n=6），血浆中马桑亭和马桑宁的检出限（S/N=3）分别为0.01 μg/L和0.1 μg/L，尿液中马桑亭和马桑宁的检出限分别为0.03 μg/L和0.3 μg/L。本法简单、灵敏、准确，可用于血浆和尿液中马桑亭和马桑宁的中毒检测。     

Counterpoise-corrected potential energy surfaces of simple H-bonded systems

Geometries and stabilization energies of various simple H-bonded complexes (water dimer, hydrogen fluoride dimer, formamide dimer, formic acid dimer) have been determined by a gradient optimization that eliminates the basis set superposition error (BSSE) by the counterpoise (CP) method in each gradient cycle as well as by the standard gradient optimization. Both optimization methods lead to different potential energy surfaces (PES). The difference depends on the theoretical level used and is larger if correlation energy is considered. Intermolecular distances from the CP-corrected PES are consistently longer, and this difference might be significant (∼0.1 ?); also angular characteristics determined from both surfaces differ significantly. Different geometries were obtained even when passing to larger basis sets (aug-cc-pVDZ). The standard optimization procedure can result in a completely wrong structure. For example, the “quasi-linear” structure of the (HF)₂ (global minimum) does not exist at the standard MP2/ 6-31G** PES (where only cyclic structure was detected) and is found only at the CP-corrected PES. Stabilization energies obtained from the CP-corrected PES are always larger than these from the standard PES where the BSSE is added only a posteriori for the final optimized structure; both energies converge only when passing to a larger basis set (aug-cc-pVDZ). Received: 11 March 1998 / Accepted: 19 June 1998 / Published online: 4 September 1998 RID=" ID=" <E6>Acknowledgements.</E6> The project was supported by the Grant Agency of the Czech Republic (Grant No. 203/98/1166). RID=" ID=" <E5>Correspondence to</E5>: P. Hobza