不同质量调整法在消费者价格指数(CPI)中的应用

传统的消费者价格指数(CPI)存在着一定的质量偏差,不能真实地反映实际价格的变化.直接比较法、交叠法、生产成本法、链接法等质量调整法的应用均有一定的局限性,且缺陷较多,均指插补调整借助于缺失值插补的原理,以同一组内商品价格的平均变化率作为质量调整系数,能有效地降低价格指数的质量偏差。Hedonic质量调整法是以实际资料建立的回归方程为基础,运用数学的手段科学的将质量变化程度加以量化,因此与传统的质量调整法相比含有较少的主观因素,为CPI指数的准确度量提供了科学的质量调整依据.     

计算机辅助装调与传统基准传递技术相结合实现三镜消像散系统的装调

为满足复杂航天光学系统对精度的要求,克服传统基准传递技术与计算机辅助装调技术对多于3片反射镜的复杂光学系统进行装调时存在的局限性,提出了两种技术相结合的装调方法。采用提出的方法对三镜消像散(TMA)空间相机进行了装调,结果显示:三镜在Y向和Z向的失调量分别由18.651和9.879 mm降低到1.036和0.102 mm,系统波前差达到全视场平均值1/14λ(RMS)。结果证明:此方法能有效缩短装调时间并达到系统要求的精度指标,对于多镜复杂光学系统装调具有指导和参考价值。     

Monolithically integrated photonic-crystal devices with photodiodes

In this paper, we demonstrate the monolithic integration of a conventional waveguide, a photonic crystal demultiplexer, a photonic crystal taper coupler, photonic crystal waveguides, and photodiodes in InGaAsP-based material to form a planar nano-optics system. Photonic crystal demultiplexers consist of hexagonally arranged air holes. Finite-difference time-domain method is implemented to investigate the performance of the demultiplexer. The system is fabricated using e-beam lithography and conventional photolithography. The input light at wavelengths of 1530 and 1550 nm can be separated using the demultiplexing system. These can then be detected by photodiodes that exhibit a wide-bandwidth performance of 22 GHz.     

Athermal metal-free planar waveguide concave grating demultiplexer

An athermal metal-free planar waveguide concave grating demultiplexer is proposed. We designed the dielectric mirror at the grating facet instead of coating with the metal on the back wall of the grating facet. The transfer-matrix method is introduced to design the dielectric mirror and the reflectance spectral responses of the 2D waveguide structure are simulated using the FDTD software (RSoft, Inc.). To reduce the temperature sensitivity of the device, the three-focal-point method is introduced. We use the design example to show the high-reflectance bandwidth of the dielectric mirror. The fabrication errors are also taken into consideration. By using the numerical model of the scalar diffraction theory, the flat-top spectral responses of the channels are simulated.     

Colorless gigabit WDM-PON link using injection locking and electro-absorption transceiver

In this paper, a novel colorless wavelength division multiplexing-passive optical network (WDM-PON) system using injection locking and electro-absorption transceiver (EAT) is proposed and demonstrated experimentally. This system has advantages, high data transmission, small downlink signal effect to uplink signal and less polarization sensitivity, compared to the system using reflective semiconductor optical amplifier (RSOA). Downlink signal modulates the right side carrier of the double side band signal by using injection locking. EAT functions as both photo detector in downlink signal and modulator for uplink signal, simultaneously. A possible cross absorption modulation effect from the EAT is analyzed experimentally. Bidirectional transmission of 1.25 Gbps and 622 Mbps for downlink and uplink, respectively, were verified through 23 km standard single mode fiber (SSMF).     

东亚地区大气环流的季节划分及其时空变化特征

利用NCEP-DOE Reanalysis 2 1979-2009年位势高度场、温度场、湿度场和风场逐日再分析资料,采用考虑面积权重的区域多要素最优分割法,对东亚地区大气环流的季节进行划分,并分析了四季起始时间的时空变化特征.研究结果表明:1)东亚地区春季最早始于中高纬地区的平流层和副热带的对流层中下层;夏季最早始于中高纬的平流层和副热带、中纬度地区的对流层中上层;秋、冬季开始最早的地区集中在东亚地区东部和东北部的对流层中低层,以及中高纬的平流层. 2)季节变化与环流形势密切相关,且对流层各个层次的夏季和冬季起始时间的分布均有较好的垂直一致性,平流层与对流层各季节起始时间分布有较大的差异性,平流层中层和下层也并不一致. 3)华北地区四季平均起始时间距平序列的逐年演变特征表明近30年该地区出现了6个四季起始时间异常偏早的年份,与El Niño活跃年份相一致,反映了海温等外强迫对大气环流季节变化的影响. 关键词： 季节划分 东亚地区 区域多要素最优分割法     

特高含水期井震结合注采系统挖潜调整研究

进入特高含水期后,开展注采系统调整挖潜剩余油是油田持续稳产的关键.为了提高特高含水阶段油田采收率,提出井震结合方法精细标定构造层位、认识储层特征,构建地质模型并数值模拟剩余油分布,针对剩余油应用井震结合解释成果设计注采系统调整方案并优化相应注水强度.实验区块研究结果表明:特高含水期,采用井震结合注采系统调整方法最终产油量和采收率分别提高31.21×10~4t和1.54%,能够达到有效挖潜剩余油的目的;而改变注水强度对最终开发效果影响显著,随着注水强度增加,采收率先增大后减小,存在最佳的注水强度为9m~3/d·m.     

基于最小化收发器数量的光网络业务量疏导

研究了网格型波分复用中的业务量疏导问题,首先把该问题表示为整数线性规划问题(ILP),优化的目标是使得网络中使用的收发器数量最少由于问题的计算复杂度较高,提出了一种启发式算法来解决该问题,数值结果表明:这种算法可以得到与整数线性规划(ILP)得到的最优解相近的结果,在WDM网络中采用适当的业务量疏导可以减少网络中使用的收发器数量。     

Stimulated raman scattering in fiber optic systems

The effect of stimulated Raman scattering (SRS) in fiber optic communications is considered. On one hand, SRS limits the launch power in a multiple-channel communication system; while on the other hand, SRS can provide optical amplification in the 1.3-μm and 1.55-μm windows. In most of the previous work these issues have been treated separately by using different assumptions. A solution is usually obtained by solving differential equations. We present a numerical method that involves the simultaneous solution of integral equations describing SRS in optical fiber. The method is general enough to be applicable for wavelength division multiplexing (WDM), optic frequency division multiplexing (OFDM), and optical amplification. However, it is efficient and simple to program and uses just a few realistic assumptions. A WDM communication system with 10 optical channels in the 1.55-μm window is studied by using this method, The data rate is above 1 Gbps. The system parameters are such that the other nonlinear effects, such as stimulated Brillouin scattering and four-wave mixing, are less significant for the system. Launch power limitations imposed by SRS are investigated for IM / DD and coherent systems. The receiver dynamic range over the wavelengths of interest is an important factor in determining the launch power limitations. An optical amplifier in the 1.3-μm window is also analyzed. The two-pump technique is investigated. With pump power levels of about 500 mw 0-dB gain can be achieved for a 30-km repeaterless link. Finally, the calculated results agree with the experiments.